• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.4
• /
• pp.3-9
• /
• 2007

Existing long range piezoelectric motors with friction based transmission mechanisms are limited by the axial load capacity. To overcome this problem, a new linear piezoelectric motor using one piezoelectric actuator combined with a novel stepping mechanism is reported in this paper. To obtain both long range and fine accuracy, dual positioning control strategy consisting of coarse positioning and fine positioning is used. Coarse positioning is used for long travel range by accumulating motion steps obtained by piezoelectric actuator. This is followed by fine positioning where required accuracy is obtained by fine motion displacement of piezoelectric actuator. This prototype is able to provide resolution of 20 nanometers and withstand a maximum axial load of 300N. At maximum load condition, the positioner can move forward to a travel distance of 5mm at a maximum speed of 0.4 mm/sec. This design of nanopositioner can be used in applications for ultra precision positioning and grinding operations where high axial force capacity is required.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.4
• /
• pp.398-403
• /
• 2006

This paper describes the evaluation of the long duration current impulse withstand characteristics of ZnO blocks for high voltage surge arresters. Four ZnO varistors were manufactured with the general ceramic production method and the long duration current impulse withstand test, electrical uniformity evaluation test and microstructure observation were performed. All varistors exhibited high density, which was in the range of $5.42{\sim}5.46g/cm^3$. In the electrical properties, the reference voltage of samples was in the range of $5.11{\sim}5.25\;kV$ and the residual voltage was in the range of $8.314{\sim}8.523\;kV$. In the long duration current impulse withstand test, sample No.2 and No.3 failed at the 2nd and 4th shot of series impulse currents, respectively, but the rest survived 18 shots during the test. Before and after this test, the variation ratio of the residual voltage of samples survived was below 0.5 %, which was in the acceptance range of 5 %. According to the results of the test, it is thought that if the soldering method is improved, ZnO varistors would be possible to apply to the high voltage arresters like the station class and transmission line arresters in the near future.

• Journal of Radiation Protection and Research
• /
• v.31 no.1
• /
• pp.9-15
• /
• 2006

A long-range atmospheric dispersion model named LADAS has been developed to understand the characteristics of the transport and diffusion of radioactive materials released into atmosphere. The developed numerical model for validation was compared with the results of the ETEX which is the long-range field tracer experiment. As a comparative study, the calculated concentration distributions agreed well in the case of the usage of the mixing heights calculated by the Richardson number than the usage of the constant mixing heights in LADAS model. Also, the calculated concentrations agreed with the time series of the measured ones at some sampling points.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.486-487
• /
• 2007

This paper describes the evaluation of long duration current impulse withstand characteristics of ZnO blocks for high voltage surge arresters. Four ZnO varistors were manufactured with the general ceramic production method and three abroad varistors were also prepared to be compared. All varistors exhibited high density, which was in the range of $5.42{\sim}5.49g/cm^3$. In the electrical properties, the reference voltage of all samples was in the range of 5.11~5.72kV and the residual voltage was in the range of 8.314~9.305kV. In the long duration current impulse withstand test, sample 2 and 3 failed at the 2nd and 4th shot of series impulse currents, respectively, but the rest survived 18 shots during the test. Before and after this test, the variation ratio of the residual voltage of samples survived were below 1.7%, which were in the acceptance range of 5%.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.5
• /
• pp.587-592
• /
• 2019

ISI (Inter Symbol Interference) reduces the performance of UAComm (Underwater Acoustic Communication). This paper shows that the performance of UAComm can be improved through the spatiotemporal diversity method that is the combination of spatial diversity and temporal diversity methods. By using spatiotemporal diversity, the array aperture was reduced to increase the efficiency of the UAComm system. It is also verified using the experimental data of BLAC18 (Biomimetic Long range Acoustic Communication 18) conducted in October 2018.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.45 no.1
• /
• pp.41-52
• /
• 2022

Development of a long-range artillery intercept system to counter the threat of enemy long-range artillery is in progress. This intercept system is a complex combination of several components. In addition, the ability to engage simultaneously is emphasized due to the characteristic of having to respond to numerous enemy bullets. In this study, the performance according to the arrangement of the detection asset and missile launchers, which are key components of the system, is analyzed. A simulation experiment was performed assuming the enemy attack at various azimuth and launch angles. As a result of the analysis, the radar seems to provide sufficient detection capability in any situation, but in the case of the launcher, the effect of the enemy's launch angle can be critical. It is recommended to place both radar and launchers behind the protection target.

• Korean Journal of Remote Sensing
• /
• v.29 no.2
• /
• pp.243-251
• /
• 2013

The optical properties of long-range transported Asian dust were studied by the satellite observations and Sun/sky radiometer measurements from the Aerosol Robotic Network(AERONET) in Northeast Asia. The movement of Asian dust from source regions to downwind areas was tracked by the Ozone Monitoring Instrument(OMI) derived aerosol product imagery. The optical properties of Asian dust were classified for geographical locations, which are source regions such as deserts area in Dunhuang and Inner Mongolia, downwind areas such as Yulin and Beijing, and long-range transported regions such as Korea(Anmyon and Gosan) and Japan(Noto). In general, relatively higher aerosol mass loadings with larger aerosol particles at desert regions were found. Aerosol Optical Depth(AOD) decreased significantly in downwind areas and long-range transported areas, which was accompanied by increased Angstrom exponents. This indicates the effects of aerosol mixing with various pollutants during transport of Asian dust plume on aerosol optical properties. Moreover, relatively high Single-Scattering Albedo(SSA) at 440 nm values ranging from 0.90 - 0.96 and increasing tendency of SSA with wavelength were observed at source region. The spectral dependence of SSA decreased during long-range transport.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.2
• /
• pp.114-121
• /
• 2009

Ultrasonic guided waves have been widely utilized for long range inspection of structures. Especially, development of array guided waves techniques and its application for long range gas pipe lines(length of from hundreds meters to few km) were getting increased. In this study, focusing algorithm for array guided waves was developed in order to improve long range inspectability and accuracy of the array guided waves techniques for long range inspection of gas pipes, and performance of the developed techniques was verified by experiments using the developed array guided wave system. As a result, S/N ratio of array guided wave signals obtained with the focusing algorithm was increased higher than that of signals without focusing algorithm.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.10 no.S_4
• /
• pp.197-206
• /
• 2001

The long-range transport mechanisms of Asian dust were analyzed based on the synoptic weather system and numerical simulation by using NCEP/NCAR reanalysis and TOMS data during the periods of 1996-2001. We classified the whole weather types of eastern Asia during spring and created the representative weather types during the yellow sand events using cluster analysis and weather charts for the last 6 years(1996~2001). These long-range transport mechanisms were related to various pressure patterns including high and low, trough and ridge, and upper-level fronts. Case studies of the yellow sand events have performed by the simulation of MM5 with meteorological elements such as the horizontal wind of u and v component, potential temperature, potential vorticity, and vertical circulation during the episodic days(2~8 March 2001). In addition, the origin of the long-range transport was examined with the estimation of backward trajectory using HYSPLIT4 Model. In this paper, we concluded that three weather types at 1000 hPa, 850 hPa, 500 hPa, and 300 hPa levels were classified respectively. The dominant features were the extending continental outflow from China to Korea at 1000 hPa and 850 hPa levels, the deep trough passage and cold advection at 500 hPa and 300 hPa levels during the yellow sand events. And also, we confirmed the existence of pola $r_tropical jets in the upper-level, the behavior of potential vorticity over Korea, the estimation of potential vorticity through vertical cross section, and the transport of yellow sand through backward trajectories.es.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.2
• /
• pp.185-191
• /
• 2011

Plastic gradient from geometrically necessary dislocation(GND) can affect material behavior significantly. In this research, mechanical behavior of polycrystalline solid is investigated using the finite element method incorporating plastic gradient from long range dislocation or GND effect. Plastic gradient effect is implemented in the analysis model by considering a long range strain term as well as elastic and plastic terms in the multiplicative decomposition. In the model, gradient hardness coefficient and length parameter are used to evaluate the effect of the long range strains and sensitive study is conducted for the parameters. It is confirmed that the GND amplifies hardening response of polycrystals compared with the single crystal.