• 제목/요약/키워드: Lock system

검색결과 558건 처리시간 0.028초

장어통발 어업의 자동기계화에 관한 연구 (Mechanization of Fishing Operation on the Sea Eel Pots)

  • 하정식;김용해;장충식
    • 수산해양기술연구
    • /
    • 제26권1호
    • /
    • pp.45-50
    • /
    • 1990
  • 장어 통발어업의 어로작업을 자동기계화하기 위한 기초조사로서, 통발어선과 어구 및 어로작업시간 등을 설문 조사한 다음 각 단계별 어로작업시간을 측정\ulcorner분석하였으며, 자동기계화에 적당한 통발어구의 구조와 규격 등을 파악하기 위한 해상 시험조업으로 어획성능과 실용성 등을 비교 검토한 결과는 다음과 같다. 1. 플라스틱 장어통발의 직경이 13cm인 대형통발과 11cm인 소형통발의 어획시험 결과 통발당 어획미수나 어획량은 차이가 거의 없었으며, 소형통발을 사용할 경우 유수저항을 20%이상 감소시킬 수 있었다. 2. 외측돌기물에 의한 회전개폐식 입구의 경우 부설 중의 분실률은 끈으로 고정시키는 입구의 경우와 거의 같아 1% 정도이나, 회전개폐식의 작업시간은 훨씬 짧아서 3인이 하던 작업을 2인으로도 충분하였다. 3. 통발의 모릿줄에 다는 납침자와 돌을 제거하고, P\ulcorner P연심로프를 침강력이 동일하도록 납줄이 2~3가닥 들어 있는 연심로프 대체하면 고달이 부분의 직경이 감소되면서 요철이 원만하게 되어 자동기계화에 의한 연속작업이 가능해진다.

  • PDF

성견에서 국산 임시 임플란트의 골 유착반응에 관한 연구 (Study on osseointegration of a Korean Transitional implant system in beagle dog)

  • 이욱재;정종원;김윤상;피성희;유형근;신형식
    • Journal of Periodontal and Implant Science
    • /
    • 제36권1호
    • /
    • pp.253-263
    • /
    • 2006
  • Purpose: Recently, dental implant systems have been widely used for the treatment of the extraction site, but we have been confronted with many limitations in esthetics, phonetics and function. Transitional implants(TI) were developed as a method of providing fixed provisional restorations during conventional implant healing. Until now, little data have been provided on korean transitional implants. The purpose of this study is to evaluate the implant placement site histologically after 4 weeks and 8 weeks. Materials and Methods : Test group( IntermetzzoTM MEGAGEN, KOREA) and control group(Mini Drive Lock, Intra Rock, U.S.A.) were immediately placed in interseptal or interproximal bone of beagle dog after mandibular premolars extraction, and had a healing period with non-submerged state but without loading, Both TI surfaces were composed of rough surfaces. Results: In the test group, the average percentage of BIC were respectively 39.40%(SD7.35) after 4 weeks and 44.05%(16.76) after 8 weeks, and In the control group were 50.75%(1.48) and 59.40%(0.00). Discussion: We evaluated the initial ability of the osseointegration of TI through this study. Because TI is placed with a conventional implant simultaneously and loaded immediately, the ability of osseointegration is a very important factor for the success of TI during the initial healing phase. Conclusion: The results of the histological evaluation of these two groups were similar to those mentioned in other studies for osseointegration of implant.

사무자동화를 위한 근거리 컴퓨터 통신망 콘트롤러 개발에 관한 연구 (Design of an Effecient Local Area Computer Communication Network Controller for Office Automation (Contention Resolution Algorithm Based on CSMA/CD))

  • 이명수;강창언
    • 한국통신학회논문지
    • /
    • 제11권2호
    • /
    • pp.137-145
    • /
    • 1986
  • CSMA/CD를 채널 억세스 방법으로 사용하고 있는 네트워크에서 평균 정보전송 지연시간을 개선하려는 방법중, 제한된 정보전송 지연시간을 지니면서 채널사용도의 변화에 따른 정보전송 지연시간의 분포가 안정되어 있는 콘덴션 해결 알고리즘을 구성하였다. IEEE 802.2의 논리적 링크제어(LLC)와 IEEE 802.3의 Medium Access Control(MAC)을 기준으로 하여 충돌이 발생한 후에 콘덴션을 해결하는 MAC의 일부를 수정, 변경하므로서 노드 콘트롤러를 구성하였다. 노드콘트롤러와 호스트 컴퓨터 IBM-PC/XT와의 정보전송은 2개의 DMA 채널을 사용하여 여러 개의 작은 버퍼들을 연쇄시키므로서 행하여 졌다. 해석적 모델을 사용하여 성능추정을 한 결과 낮은 채널 부하에서는 BEB(Binary Exponential Back-off) CSMA/CD의 지연특성에 접근하며 채널 부하가 높아진다 하더라도 네트워크가 dead lock되지 않으며 제한된 최대 전송지연 시간에 접근함을 알 수 있었다. 따라서 본 논문에서 제작된 노드 콘트롤러는 사무자동화 환경은 물론 시간적인 제약내에서 정보의 전송을 요구하는 연구소나 공장자동화 환경에도 응용할 수가 있다.

  • PDF

척추용 퓨전 디바이스의 개발 및 3차원 유한요소법을 이용한 역학적 해석 (Development of a Vertebral Fusion Device and Its Mechanical Analysis using 3-D Finite Element Method)

  • 김현수;전병찬;손한철;최경호;박정호;최태원
    • 대한의용생체공학회:의공학회지
    • /
    • 제23권5호
    • /
    • pp.385-390
    • /
    • 2002
  • 오늘날 의료기기의 국산화 연구가 활발히 진행되고 있는 가운데 본 연구에서는 적추용 fusion device를 새롭게 개발하고자 시도하였다. 일반적으로 사용되고 있는 삽입형과 나사형을 기본 대상으로 하되 수술 시 뼈를 보다 적게 제거하여 삽입할 수 있게 하는 데 .) 주안점을 두고 형상 개발을 시도하였다. 아직 그 실효성을 논하기는 어려우나 고안된 척추용 fusion device의 형상을 중심으로 소개하고자 한다. 본 연구에서 경첩형과 분리삽입형을 고안하게 되었다. 그러나 경첩형은 기존 형상의 절반 크기로 삽입되는 장점은 있으나 핀의 강도해석과 안정된 잠금 장치의 개발에 더 연구가 요구되어 일단 본 연구에서는 분리삽입형을 중심으로 시제품과 3차인 유한요소 모델을 제작하여 그 역학적 해석을 행하였다. 그 결과 척추에 작용하는 기본 하중에 대한 역학적 안전성은 인정되나 아직 실용화되기까지는 보조 수술장비의 개발이 필요하다고 사료된다.

Robustness Examination of Tracking Performance in the Presence of Ionospheric Scintillation Using Software GPS/SBAS Receiver

  • Kondo, Shun-Ichiro;Kubo, Nobuaki;Yasuda, Akio
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
    • /
    • pp.235-240
    • /
    • 2006
  • Ionospheric scintillation induces a rapid change in the amplitude and phase of radio wave signals. This is due to irregularities of electron density in the F-region of the ionosphere. It reduces the accuracy of both pseudorange and carrier phase measurements in GPS/satellite based Augmentation system (SBAS) receivers, and can cause loss of lock on the satellite signal. Scintillation is not as strong at mid-latitude regions such that positioning is not affected as much. Severe effects of scintillation occur mainly in a band approximately 20 degrees on either side of the magnetic equator and sometimes in the polar and auroral regions. Most scintillation occurs for a few hours after sunset during the peak years of the solar cycle. This paper focuses on estimation of the effects of ionospheric scintillation on GPS and SBAS signals using a software receiver. Software receivers have the advantage of flexibility over conventional receivers in examining performance. PC based receivers are especially effective in studying errors such as multipath and ionospheric scintillation. This is because it is possible to analyze IF signal data stored in host PC by the various processing algorithms. A L1 C/A software GPS receiver was developed consisting of a RF front-end module and a signal processing program on the PC. The RF front-end module consists of a down converter and a general purpose device for acquiring data. The signal processing program written in MATLAB implements signal acquisition, tracking, and pseudorange measurements. The receiver achieves standalone positioning with accuracy between 5 and 10 meters in 2drms. Typical phase locked loop (PLL) designs of GPS/SBAS receivers enable them to handle moderate amounts of scintillation. So the effects of ionospheric scintillation was estimated on the performance of GPS L1 C/A and SBAS receivers in terms of degradation of PLL accuracy considering the effect of various noise sources such as thermal noise jitter, ionospheric phase jitter and dynamic stress error.

  • PDF

적응 루프 대역폭을 가진 디지털 반송파 동기 루프에 관한 연구 (A study on the digital carrier recovery loop with adaptive loop bandwidth)

  • 한동석
    • 한국통신학회논문지
    • /
    • 제22권8호
    • /
    • pp.1774-1781
    • /
    • 1997
  • 본 논문은 잔류 측대파(vestigial sideband; VSB) 변조를 이용한 CATV 및 HDTV에서 주파수 및 위상 동기 루프 (frequency & phase lock loop; FPLL)의 완전 디지털 구현을 위한 알고리듬과 하드웨어 구조를 제안한다. 미국의 대연합(Grand-Alliance)에서 제안된 VSB 변조를 위한 CATV 및 HDTV 수신기는 아날로그 신호처리를 통하여 반송파 복구를 수행한다. 그러므로 향후 단열 칩 ASIC 개발에 상당한 부담을 주는 구조이다. 본 논문에서는 VSB 변조 방식의 이러한 문제점을 해결하기 위하여 수신된 신호를 기저 대역 근처의 IF 신호로 떨어뜨린 후 아날로그-디지털(AD) 변환을 통하여 모든 신호처리를 디지털 영역에서 할 수 있는 FPLL 구조를 제안한다. 제안된 시스템은 주파수 풀-인(pull-in) 영역이 -200KHz- +250KHz 정도의 우수한 성능을 보여준다. 그리고 위상 잡음의 영향을 최소화 하면서 빠른 포착 성능을 유지하기 위하여 루프 필터의 대역폭을 적응적으로 가변하는 특징을 가진다.

  • PDF

임시전력 건설현장에 사용되는 전기설비의 감전위험에 관한 현장실태 조사 및 분석 (The Investigation and Analysis of Field Condition on the Electrical Shock Hazard of Electrical Facilities Used for Temporary Power Supply at Construction Site)

  • 길형준;이복희
    • 조명전기설비학회논문지
    • /
    • 제18권6호
    • /
    • pp.197-204
    • /
    • 2004
  • 건설현장에서 공사기간 중 일시적인 전원공급을 위하여 사용되는 임시전력설비는 영구설비와 달리 최소한의 보호장치만을 구비하여 운용되는 설비로서, 산만한 작업환경, 전기설비의 재사용으로 인한 노후화 등의 불안요인에 의해 타설비에 비해 많은 감전위해요인을 나타내고 있다. 이에 임시전력설비의 감전위험요소를 분석하기 위해 수전 설비, 배ㆍ분전반 등에 대한 실태조사 및 설문조사가 병행하여 실시되었으며 관련 전문가, 연구원, 한국전기안전공사 기술자 등에 의해 전국적으로 실시되었다. 그 대상은 공항, 아파트, 시립운동장 등 다양하였다. 실태조사의 분석 결과 자물쇠장치의 불량, 충전부 방호의 미흡 등 문제점이 나타났으며 이를 해소하기 위해서는 관련 제도개선 안전교육, 안전점검 등이 이루어져야 한다. 향후 분석 자료는 건설현장에서의 감전사고를 방지하는데 활용될 수 있으며 전기설비를 안정화시키는데 이용될 수 있을 것이다.

DWDM용 다채널 파장 가변 레이저 다이오드 모듈을 위한 다수개의 광 수신 소자를 갖는 50 GHz 내장형 파장 안정화 모듈의 파장 미세 조정 (Fine tuning of wavelength for the intenrnal wavelength locker module at 50 GHz composed of the photo-diode array black with the multi-channel tunable laser diodes in DWDM application)

  • 박흥우;윤호경;최병석;이종현;최광성;엄용성;문종태
    • 한국광학회지
    • /
    • 제13권5호
    • /
    • pp.384-389
    • /
    • 2002
  • 본 논문은 DWDM 응용을 위한 새로운 개념의 파장안정화 모듈을 제안한다. 일반적으로 내장형/외장형 파장안정화기에서는 LD의 파워를 모니터링 하는 모니터 PD 이외에 파장을 모니터링하는 하나의 에탈론 PD가 사용된다. 50 GHz응용에서 에탈론의 각도를 미세 조정하는 방법이 일반적이다. 그러나, 에탈론의 미세 각도 튜닝으로 인한 파장안정화기 성능에 미치는 영향은 대단히 크며 미세 각도로 정렬하는 공정은 매우 어렵다. 에탈론 PD 배열 블록을 사용함으로써 파장안정화 모듈의 기계적인 에탈론 정렬 오차를 낮출 수 있으며 미세 파장 조정이 가능하다. 파장안정화 모듈의 에탈론 각도 조정에 따른 FSR과 최대 투과 파장의 위치 변화 정도를 계산하였으며 본 실험에 사용된 파장안정화 모듈의 최적화된 초기 에탈론 회전 각도를 보고한다.

비균등 메모리 접근 구조에서의 효율적인 그룹화 집단 연산의 처리 (Efficient Processing of Grouped Aggregation on Non-Uniformed Memory Access Architecture)

  • 최성준;민준기
    • 데이타베이스연구회지:데이타베이스연구
    • /
    • 제34권3호
    • /
    • pp.14-27
    • /
    • 2018
  • 최근, 대칭형 다중 처리 (SMP: Symmetric Multiprocessing) 구조에서 발생하는 메모리 병목 현상을 보완하기 위하여 비균등 메모리 접근 구조 (NUMA: Non-Uniform Memory Access) 구조가 제시되었다. 또한, 집단 연산자는 데이터의 특성 및 요약 정보를 제공하는 주요 연산자로써, 집단 연산자의 효율성은 전체 시스템의 성능에 매우 큰 영향을 미친다. 따라서, 본 논문에서는 NUMA 구조에서 효율적으로 집단 연산을 처리할 수 있는 기법을 제안한다. 제안 기법은 분할 단계와 합병 단계로 구성되며, 분할 단계에서 그룹 속성에 따라서 대상 릴레이션을 부분 릴레이션들로 분할한다. 따라서, 각 쓰레드가 독립적으로 부분 릴레이션에 대하여 집단 연산을 수행할 수 있으므로 합병 단계에서 원격 메모리 접속이 발생하지 않도록 하였다. 또한, 합병 단계에서는 각 쓰레드가 지역 해시 테이블을 이용하여 집단 연산을 수행하도록 하고 쓰레드들이 생성한 집단 연산 결과들을 하나로 병합하는데 잠금 경쟁이 발생하지 않도록 하여 처리 성능을 향상하였다.

도심 캠퍼스 공유공간의 공간 구조 변화에 대한 연구 - 그리드락의 반대 개념으로서의 공유 캠퍼스로의 변화에 대하여 - (A Study on the Change of Spatial Structures of Shared Space at Urban Campuses - The opposite concept of Gridlock upon the change to shared campuses -)

  • 강은기;백진
    • 대한건축학회논문집:계획계
    • /
    • 제34권11호
    • /
    • pp.145-156
    • /
    • 2018
  • Urban campus, one of the main urban facilities, is the representative place that is struggling with 'gridlock'. Due to privatization of space among different departments and space shortages, gridlock has been occurring as a result. The urban campus trying to solve this problem by changing the quality of space, especially the structure of the shared space, which is expected to be the solution to the grid lock problem. The main purpose of this study is to investigate the structural change in the university's shared space based on paradigm transition. The theoretical consideration is to analyze the spatial characteristics of university shared space that appear at different stages through a new perspective that compares the gridlock phenomenon and the shared paradigm. The framework of the analysis of the shared space, which has recently been restructured, is classified into the spatial characteristics of collaborative space, the creative space, and the common/complex space. In addition, these spatial characteristics are again analyzed through the division of legislative facility classification, management governance subject, area, building location and layout, exposure to the outside as well as the analysis of student and staff entry and exit, sharing structure of site and space, and the classification of program characteristics. The results are as follows: The restructured space is systemized so that the management governance of each space would be connected to each other to share information and space. Furthermore, the spatial boundary between colleges or between campus spaces are not only physically, but categorically clear. The restructured space has semi (or in-between)-spatial characteristics such as the intersection in inside and outside of the pedestrian's circulation and the mixture of programs. This study could serve as principal references in presenting the systematic analysis of directions of the shared spatial structure for the urban campus where new educational space is required due to the changes in the university system.