• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.779-780
• /
• 2009

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.696-697
• /
• 2014

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.392-393
• /
• 2009

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.314-315
• /
• 2009

• 방송공학회논문지
• /
• 제23권4호
• /
• pp.519-525
• /
• 2018

본 논문에서는 다채널 위너 필터를 이용하여 마이크로폰 어레이에서 취득된 신호의 잡음을 제거하는 방법을 다룬다. 다채널 위너 필터는 음성 신호의 방향에 대한 정보를 필요로 하지 않는 필터로서 단일 음성 음원의 경우, 음성 왜곡을 발생시키지 않는 MVDR (Minimum Variance Distortionless Response) 공간 필터와 단일 채널 스펙트럼 필터로 분리될 수 있다. MVDR의 방향벡터에 해당하는 단일 음성 음원과 마이크로폰 어레이 간의 음향 전달 함수는 다채널 위너 필터의 부공간 분해 (subspace decomposition)를 이용하여 추정할 수 있다. 이 때 상관 행렬 추정 과정에서 발생하는 오차로 인해 추정되는 음향 전달 함수에도 오차가 발생하게 되며 이에 따라 다채널 위너 필터를 구성하는 MVDR은 음성 왜곡을 발생시키게 된다. 이러한 음성 왜곡을 완화시키기 위해 diagonal loading을 적용하고 실험을 통해 그 효과를 검증한다. 실험에서는 7개의 선형 마이크로폰으로 수집된 데이터를 이용하였으며 잡음을 섞기 전 신호와 잡음을 섞은 후 필터를 통과시킨 신호 간의 MFCC 오차를 측정한다. 실험 결과, diagonal loading을 통해 MFCC 오차를 줄일 수 있음을 확인하였다.

• 한국소음진동공학회논문집
• /
• 제19권11호
• /
• pp.1126-1132
• /
• 2009

Bridge structures are designed to support ordinary loadings such as vehicles, wind, temperature and current as well as unexpected loadings like earthquakes and storm. Especially, the displacement of Flexible bridges like an suspension bridge under ordinary loading conditions is necessary to be monitored. In case of long span bridges, there are some difficulties in monitoring the displacement of center of the main span using traditional laser displacement sensors. In this study, the static and dynamic displacement responses due to vehicle loadings were measured by DGPS(differential global positioning system) technique. The displacement response data were compared with data obtained from traditional laser displacement sensors so that the static and dynamic behavior of the bridge under vehicle loadings was examined and the applicability of the displacement response measurement using DGPS technique was verified. The static and dynamic loading test for an self-anchored suspension bridge, So-rok Bridge, was performed using vehicles. The displacement response from DGPS technique and that from laser displacement sensors of the bridge monitoring system were compared. The amplitude of white noise from DGPS based measurement was about 7 mm and that of laser displacement sensor based measurement was about 3 mm. On the other hand, dynamic behavior of the center of main span from DGPS based measurement showed better agreement with influence line of the bridge than that from laser displacement sensors. In addition, there were some irregular and discontinuous variation of data due to the instability of GPS receivers or frequent appearance of GPS satellites. Post-processing via the reference station close to an observation post provided by NGII(National Geographic Information Institute) will be a counter-plan for these defects.

• 소음진동
• /
• 제6권3호
• /
• pp.297-303
• /
• 1996

The general approach using sine series expansions was represented to evaluate the radiation loading from a vibrating surface on a simply supported cylinder. In this paper, the fluid-loading coefficients (radiation impedance) for a submerged finite cylindrical shell with an arbitrary end condition are defined and evaluated. The vibrations of cylindrical shell are expressed by using cosine series expansions to analyze the radiation impedance for a finite cylindrical shell. It is possible to represent the displacements at both ends of cylindrical shell in comparison with sine series. The direct and cross modal components of fluid-loading coefficients are shown and the validity of cosine series expansions are verified from the results of numerical computations. This approach and results are directly applicable in the analysis of sound radiation from subemerged finite cylindrical shell with arbitrary end conditions.

• ETRI Journal
• /
• 제29권1호
• /
• pp.50-58
• /
• 2007

Robust adaptive beamforming based on worst-case performance optimization is investigated in this paper. It improves robustness against steering vector mismatches by the approach of diagonal loading. A closed-form solution to optimal loading is derived after some approximations. Besides reducing the computational complexity, it shows how different factors affect the optimal loading. Based on this solution, a performance analysis of the beamformer is carried out. As a consequence, approximated closed-form expressions of the source-of-interest power estimation and the output signalto-interference-plus-noise ratio are presented in order to predict its performance. Numerical examples show that the proposed closed-form expressions are very close to their actual values.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.904-910
• /
• 2014

The Helicopter noise analysis code was developed using Farassat's Formular 1A based on Ffowcs-Williams and Hawkings equation and Lowson's Formula which contains single loading noise source concept. HART-II(Higher harmonic control Aeroacoustic Rotor Test), STAR(Smart-Twisting Active Rotor) and Active-tab Rotor were computed and analyzed by using developed noise code. The results of these rotor noise prediction are explained and its applicability would be mentioned in this paper.

• 대한안전경영과학회지
• /
• 제10권2호
• /
• pp.95-103
• /
• 2008

The package loading process of the lumbering industry is an operation that after a pair of workers bind three or six lumbers into one unit and cut both ends of the lumbers, transports the weight cargo of 30-50kg by one meter, pack and load at a height of 1.2 meters. This package loading process causes lots of noise and wood dust when workers carry out the heavy work as the above. Therefore we developed the monolithic both ends cutting package loading equipment in order to prevent from getting musculoskeletal disease. An loading bar working system of this equipment is improved from pneumatic pressure system to oil pressure system, furnished the newly designed flow dividers, and developed the new system that a both end array is loaded identically. Also we developed the safety equipment of loading bar in order to prevent workers mistake and overload from malfunction during the package loading process. The main cause of job evasion on working place could be solved by preventing the musculoskeletal disease and improving the working environments.