• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.6
• /
• pp.522-525
• /
• 2006

Biodiesel conversion from soybean oil reached a maximum of 70% at 18 h using immobilized 1,3-specific Rhizopus oryzae lipase alone. Biodiesel conversion failed to reach 20% after 30 h when immobilized nonspecific Candida rugosa lipase alone was used. To increase the biodiesel production yield, a mixture of immobilized 1,3-specific R. oryzae lipase and nonspecific C. rugosa lipase was used. Using this mixture a conversion of greater than 99% at 21 h was attained. When the stability of the immobilized lipases mixture was tested, biodiesel conversion was maintained at over 80% of its original conversion after 10 cycles.

• KSBB Journal
• /
• v.17 no.6
• /
• pp.543-548
• /
• 2002

The enantioselective esterification of racemic ibuprofen catalyzed by a Candida rugosa lipase was studied according to reaction conditions such as a lipase concentration, reaction temperature, alcohol chain length and alcohol concentration. The S-(+)-ibuprofen alkyl esters prepared were converted to S-(+)-ibuprofen by hydrolysis with sulfuric acid as a catalyst. High conversions in the esterifications were obtained at 60$^{\circ}C$ and an equimolar ratio of octanol to ibuprofen. The initial reaction rate of the esterification decreased with increasing octanol concentration. Conversion and initial reaction rate increased with increasing alcohol chain length. Values of enantiomeric excess(ee) according to esterification reaction conditions did not change below 60$^{\circ}C$. On the other hand, values of conversion and ee for the chemical hydrolysis of S-(+)-ibuprofen alkyl esters were independent of alcohol alkyl chain length. Optical resolution of racemic ibuprofen was achieved by lipase catalyzed esterification and chemical hydrolysis. The separation method provided a high yield and enantioselectivity for the production of S-(+)-ibuprofen from racemic ibuprofen.

• Microbiology and Biotechnology Letters
• /
• v.15 no.2
• /
• pp.122-128
• /
• 1987

Lipases from Candida rogosa and Rhizopus arrhizus were immobilized by entrapment with photo-crosslinkable resin prepolymer for the study of fat splitting and interesterification in isooctane-two phase system. Dioctylsulfosuccinate was selected as the most suitable surfactant during the immobilization. Lipase entrapped with hydrophobic photo-crosslinkable resin prepolymer(ENTP-3000) exhibited the highest activity, whereas lipase entrapped with hydrophilic gel(ENT-4000) was more stable in organic solvent. As the degree of hydrophobicity of the immobilization matrix was increased, Vm(app) of the lipase entrapped was increased, but Km(app) was approximately constant. While the optimum pH of the lipases entrapped on hydrophilic gel (ENT-4000) were around pH 7.0 for Candida lipase and Rhizopus lipase, the reaction rate of the lipases entrapped on hydrophobic gel were less dependent on pH variations for short reaction time. However, for longer reaction time, the lipnses from C. rugosa and R. arrhizus entrapped on hydrophobic gel yielded maximum rate at pH 6.0 and 6.5, respectively, Entrapment method endowed the lipase with thermal stability.

• Fisheries and Aquatic Sciences
• /
• v.12 no.1
• /
• pp.16-23
• /
• 2009

Lipids were extracted from marine rotifer, Brachionus rotundiformis in order to examine the functionality of lipid enzymatic modification. The fatty acids, palmitic, linoleic, oleic and stearic acids were the dominant forms accounting for approximately 35.8%, 21.5%, 15.9% and 7.7% of the total lipid content, respectively. Lipid fractions were categorized as neutral lipids (38.5%), glycolipids (45.9%) and phospholipids (17.6%), and after extraction from the rotifer were isolated by thin-layer chromatography (TLC) as free fatty acids (FFA), monoacylglycerol (MAG), diacylglycerol (DAG) and triacylglycerol (TAG). The production of polyunsaturated fatty acid (PUFA) concentrate from rotifer lipids was studied using lipase-catalyzed hydrolysis. In addition, rotifer lipids were modified by hydrolysis using lipases such as porcine pancreas, Candida rugosa and Rhizomucor miehei. The lipase from Rhizomucor miehei was effective in extracting linoleic acid (C 18:2), while the lipase from Candida rugosa was effective in palmitic acid (C16:0) extraction.

• Korean Journal of Chemical Engineering
• /
• v.35 no.11
• /
• pp.2220-2231
• /
• 2018

Lipase from Candida rugosa was immobilized on $MgO{\cdot}SiO_2$ hybrid grafted with amine, thiol, cyano, phenyl, epoxy and carbonyl groups. The products were analyzed using Fourier transform infrared spectroscopy, nuclear magnetic resonance, low-temperature $N_2$ sorption and elemental analysis. Additionally, the degree of coverage of the oxide material surface with different functional groups and the number of surface functional groups were estimated. The Bradford method was used to determine the quantity of immobilized enzyme. The largest quantity of enzyme (25-28 mg/g) was immobilized on the hybrid functionalized with amine and carbonyl groups. On the basis of hydrolysis reaction of p-nitrophenyl palmitate to p-nitrophenol, it was determined how the catalytic activity of the obtained biocatalysts is affected by pH, temperature, storage time, and repeated reaction cycles. The best results for catalytic activity were obtained for the lipase immobilized on $MgO{\cdot}SiO_2$ hybrids with amine and carbonyl groups. The biocatalytic system demonstrated activity above 40% in the pH range 4-10 and in the temperature range $30-70^{\circ}C$. Lipase immobilized on the $MgO{\cdot}SiO_2$ systems with amine and epoxy groups retains, respectively, around 80% and 60% of its initial activity after 30 days of storage, and approximately 60-70% after 10 reaction cycles.

• KSBB Journal
• /
• v.23 no.6
• /
• pp.509-512
• /
• 2008

The hydrolysis reaction of soybean oil was conducted experimentally by various source enzymes. The analytical result of hydrolysate of soybean oil showed that the compositions were linoleic acid, olic acid, palmitic acid, and stearic acid in order. The enzymes CR-E and CC-E from Candida rufosa and Candida cylindracea had two hold or more hydrolysis conversions than those of Lipase 16, Novozyme 871, and Lipolase-100L under the same conditions. Therefore CR-E and CC-E were selected for further experiments. These two enzymes had similar ranges of optimun conditions as follows: pH 3-6, $35-45^{\circ}C$, and water to soybean oil ratio of 3.3 or above. They finally got conversions 95% above.

• Bulletin of Food Technology
• /
• v.7 no.2
• /
• pp.64-73
• /
• 1994

Using 20 lipases from various microbial origins medium chain glycerides, namely, mono-, di-, and tri-carproyl glycerols from glycerol and acid were synthesized in isooctane. Enzyme reaction was performed at 0.35 M of capric acid, 0.025M of glycerol and the same mass of silica gel to remove water in 5ml of isooctane with 30mg of lyophilized lipase. Among 20 lipases, eleven lipases showed good synthetic activities, especially lipase from Pseudomonas aeruginosa (Lipase PS), Rhizomucor miehei origined lipase and Chromobacterium viscosum lipase (Lipase CV) showed good activities for production of tricaproylglycerol, while Lipase OF-360 (origined from Candida rugosa) and Lipase D (Rhizopus delemar) were good for production of dicaprolyglycerol. The lipases, especially Lipase PS, have high thermal stability at $ 60^{circ}C$, and optimum pH of lyophilization for dehydrating the lipase was pH 6.5.

• Journal of Microbiology and Biotechnology
• /
• v.7 no.2
• /
• pp.151-156
• /
• 1997

Two commercially available lipases, Lipase OF (non-specific lipase from Candida rugosa) and Lipolase 100T (1, 3-specific lipase from Aspergillus niger), were immobilized on insoluble hydrophobic support HDPE (high density polyethylene) by the physical adsorption method. Hydrolysis performance was enhanced by mixing a non-specific Lipase OF and a 1, 3-specific Lipolase 100T at a 2 : 1 ratio. The results also showed that the immobilized lipase maintained its activity at broader temperature ($25~55^{\circ}C$) and pH (4-8) ranges than soluble lipases. In the presence of organic solvent (isooctane), the immobilized lipase retained most of its activity in upto 12 runs of hydrolysis experiment. However, without organic solvent in the reaction mixture, the immobilized lipase maintained most of its activity even after 20 runs of hydrolysis experiment.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.6
• /
• pp.653-662
• /
• 2012

This study measured the effect of general pre-treatment on PLA fabrics to confirm the benefits of enzymatic processing on PLA fabrics in the textile industry as well as evaluated the hydrolytic activities of three lipases. The effects of lipase hydrolysis were analyzed through moisture regain, dyeing ability, tensile strength, and surface morphology. As a result, PLA fibers were easily damaged by a low concentration of sodium hydroxide and a low treatment temperature. The optimal treatment conditions of Lipase from Candida cylindracea were pH 8.0, $40^{\circ}C$, and 1,000 U. The optimal treatment conditions for Lipase from Candida rugosa were pH 7.2, $37^{\circ}C$, and 1,000 U. The optimal treatment conditions for Lipase from Porcine pancreas were pH 8.0, $37^{\circ}C$, and 2,000 U. The moisture regain and dyeing ability of PLA fabrics increased and the tensile strength of PLA fabrics decreased. The results of surface morphology revealed that there were some cracks due to hydrolysis on the surface of the fiber.

• KSBB Journal
• /
• v.14 no.6
• /
• pp.696-701
• /
• 1999

The enzymatic hydrolysis of Castor oil for the mass production of ricinoleic acid was studied to find out the optimum conditions such as solvents and the weight ratio of substrate to enzyme. Three different lipases were tested for the hydrolysis of castor oil: lipase from Porcine Pancrease(lipsase PP), lipase from Candida cylindracea(lipase CC), lipase from Candida Rugosa(lipase CR). The poor mass transfer in water caused a low degree of hydrolysis of castor oil. To overcome this problem, organic solvents were used. Among organic solvents tested, hydrophobic solvents gave better results of hydrolysis than hydrophilic solvents. Organic solvents also lowered or changed the effect of pH. Isopropyl ether made complete hydrolysis of castor oil. The ratio of water to isopropyl ether and the ratio of weight ratio of lipase to castor oil were important for the hydrolysis of castor oil. At 30$^{\circ}C$ castor oil was completely hydrolyzed by 4 wt% of lipase in the mixture of isopropyl ether and water(1:1 in volume).