• 제목/요약/키워드: Liner

검색결과 1,233건 처리시간 0.036초

선박소음의 수중분포에 관한 연구 (UNDERWATER DISTRIBUTION OF VESSEL NOISE)

  • 박중희
    • 한국수산과학회지
    • /
    • 제10권4호
    • /
    • pp.227-235
    • /
    • 1977
  • 1976년 8월 16일 (북위 $34^{\circ}27'30'$ 동경 $128^{\circ}23'15'$)과 1977넌 7월 28일(북위 $34^{\circ}47'$ 동경 $128^{\circ}53'$)에 관악산호의 선박소음이 r.p.m에 따라 항해시와 정선시 (기관의 공회전)의 소음압이 해중에 분포하는 것을 조사 연구한 결과를 요약하면 다음과 같다. 1. 기관의 r.p.m.과 음압관계 r.p.m.과 음압의 증가비는 100 : 1이었으며 r.p.m. 600에서 104dB로 peak를 이루었다. 2. 외현주변의 해중해압분포 A. 정선시의 기관소음압 100,102,103,104,104 dB일때 관측점 No.1에서 69,70,72,74,75 dB No.3은 No. 1에 비해 $2\~3\;dB$ 증가해 peak를 이루었고 No.5는 No.3에 비해 $10\~15\;dB$씩 감쇠되었다. 기관소음압이 최대 일때 관측점 $No.1\~No.5$에서의 음압이 투과된 백분율은 약 $78,79,80,73,70\%$였다. B. 항해시의 선박수중소음압 정선시와 같은 기관회전 조건하에서 No.2에서 69,72,75,77,78 dB로 peak를 이고 No. 1보다 $2\~3\;dB$씩 감쇠되었다. 기관 최고소음압에 대한 $No1.\~No.5$에서의 음압투과 백분율은 약 $78,81,79,77,71\%$ 였다. 3. 항해시와 정선시의 외현해중 음압 peak점에서의 음압을 비교하면 항해시가 1 dB 높았다. 4. 선박이 멀어질 때 0 m(관측점 통과시)에서 67 dB, 1,400 m에서 56 dB였다. 5. 선박이 가까워질 때 거리 0 m에서 72 dB, 1,400 m에서 57 dB로서 멀어 질때와 비교하면 0m에서 5 dB, 600 m에서 2 pB씩 증가한 도플러 효과가 일어남을 알 수 있다. 6. r.p.m.을 600으로 하여놓고 스크류를 돌리지 않고 기관만 공회전 시킬 때 수평거리 20 m인 곳의 No.7에서 수심 10 m마다 50 m까지의 음압은 68,75,62,59,55,51 dB였다.

  • PDF

중·저준위 방사성 폐기물 처리용 시멘트 고화체의 압축강도와 동탄성계수의 관계 (Relationship between Compressive Strength and Dynamic Modulus of Elasticity in the Cement Based Solid Product for Consolidating Disposal of Medium-Low Level Radioactive Waste)

  • 김진만;정지용;최지호;신상철
    • 콘크리트학회논문집
    • /
    • 제25권3호
    • /
    • pp.321-329
    • /
    • 2013
  • 방사성 폐기물 최종 매립장이 완공됨으로써 그동안 원자력 발전소 내에서 관리하고 있던 중 저준위 방사성 폐기물은 최종 처분장으로 이송하여 관리해야 한다. 주로 액상의 이온교환수지로 구성된 중 저준위 방사성 폐기물은 플라스틱 또는 강제용기 안에서 시멘트계 재료로 고화처리 되고 있다. 시멘트계 재료는 취성적이므로 이송 중 낙하, 충돌 등에 의해 붕괴될 경우, 방사성 물질이 유출될 수 있는 가능성이 있다. 안전성이 있는 이송장비를 설계하기 위해서는 현재의 고화체가 어느 정도의 강도를 발현하고 있는지를 확인할 필요가 있다. 그러나 방사성 물질을 포함하고 있는 폐기물의 강도를 직접법에 의해 측정하는 것은 위험하므로 불가능하기 때문에 동탄성계수와 같은 비파괴시험을 통해 간접적으로 강도를 파악하여야 한다. 따라서 방사성 폐기물의 압축강도와 동탄성계수의 관계를 규명할 필요가 있다. 폐기할 시점에서 이온교환수지 처리용 고화체의 압축강도는 3.44 MPa (500 psi)이다. 이론적으로 시멘트는 시간의 경과에 따라서 강도가 증진되기 때문에 폐기된 후 수년에서 수십년이 경과한 현 시점에서 고화체의 강도는 기준치를 크게 상회할 가능성이 있다. 이와 같은 배경에서 이 연구에서는 중 저준위 방사성 폐기물 처리용시멘트 고화체의 재료구성을 유지하면서 3~30 MPa 범위의 다양한 강도 수준을 갖는 시멘트 고화체를 제조하고 이를 대상으로 압축강도와 동탄성계수의 관계를 도출하고자 하였다. 실험 결과, AE제 첨가율의 변화에 의해 목표로 설정하였던 3~30 MPa 범위를 만족하는 고화체의 제조가 가능하였다. 또한 미리 기포를 제조하여 혼입하는 방법보다 AE제를 배합수에 직접 혼합하는 방법이 단위용적질량 및 강도를 보다 정확히 조절하는데 유리한 것으로 나타났다. AE제 첨가율에 의한 단위용적질량과 공기량은 첨가율이 낮은 범위에서 급격하게 변화하였으며 첨가율이 증가할수록 변화량은 감소하였다. 이온교환수치 처리용 시멘트 고화체의 동탄성계수는 4.1~10.2 GPa 범위로 나타났으며, 일반콘크리트 보다 약 20 GPa 정도 낮고 그 차이는 강도의 증가에 따라 증가하는 것으로 나타났다. 이온교환수지 처리용 시멘트 경화체에서도 압축강도와 동탄성계수는 선형적인 관계를 보이고 있다.

사전투수 및 벤토나이트 품질에 따른 GCL의 투수종결기준에 미치는 영향평가 (Dependency of Compatibility Termination Criteria on Prehydration and Bentonite Quality for Geosynthetic Clay Liners)

  • 이재명;;최재순;정문경
    • 한국지반공학회논문집
    • /
    • 제20권7호
    • /
    • pp.141-158
    • /
    • 2004
  • 매립지나 오${\cdot}$폐수 저장지 등에서 폐기물 또는 오염물질의 저장 및 차단에 널리 사용되고 있는 Geosynthetic Clay Liner(GCL)의 물에 의한 사전투수 및 벤토나이트 품질이 투수종결기준에 미치는 영향을 평가하기 위해서 소디움 벤토나이트가 주성분인 두 종류의 GCL을 대상으로 증류수와 농도변화를 위해 5, 10, 20, 50, 100 mM 용액을 혼합한 염화칼슘용액을 이용하여 투수시험을 수행하였다. 투수종결기준들로는 물리적 종결기준들(즉, ASTM에 준한 유출량과 유입량간의 비율과 안정화된 투수계수, 최소 공극량 두배에 해당하는 유출, 그리고 안정화된 시료두께)과 유입수와 유출수간의 화학적 평형에 따른 화학적 종결기준들(즉, 전기전도도, pH, 그리고 칼슘이온과 염소이온 농도)이 고려되었다. 염화칼슘을 이용한 투수시험의 경우, 벤토나이트에 이온결합된 나트륨($Na^+$)에 대한 칼슘($Ca^{2+}$) 치환이 GCL의 투수계수에 중대한 영향을 미치는 것에 근거하여 유입수와 유출수 간의 화학적 평형 및 투수계수의 평형이 이루어질 때까지 실시하였다. 염화칼슘농도에 따른 투수실험결과, 소요투수기간은 농도별로 1일 미만에서 900일 이상으로 큰 차이를 보였으며 염화칼슘 용액의 농도가 낮을수록 평형에 도달하기까지 더 많은 시간이 소요되는 것으로 나타났다. 특히, 염화칼슘 용액의 농도가 20 mM이하의 경우, GCL의 물에 의한 사전투수 여부와 벤토나이트의 품질에 상관없이 유입수와 유출수간의 화학적 평형만이 투수계수의 평형을 보장할 수 있는 것으로 나타났다. 그러나, 염화칼슘 용액의 농도가 50 그리고 100 mM의 경우, 유출량과 유입량간의 비율과 공극량 두배에 해당하는 유출을 제외한 모든 종결기준들이 투수계수의 평형을 보장할 수 있는 것으로 나타났다. 이상의 결과로부터, 물에 의한 사전투수 여부와 벤토나이트의 품질에 상관없이 오로지 유입수와 유출수간의 농도 평형에 준한 종결기준만이 GCL의 투수시험에 적합할 것으로 판단된다.

LED 광중합기의 조사 mode가 복합레진의 미세경도 및 수축응력에 미치는 영향 (INFLUENCE OF IRRADIATION MODES ON THE MICROHARDNESS AND THE POLYMERIZATION CONTRACTION OF COMPOSITE RESIN POLYMERIZED WITH LED CURING UNIT)

  • 박인호;오유향;이난영;이창섭;이상호
    • 대한소아치과학회지
    • /
    • 제32권2호
    • /
    • pp.312-320
    • /
    • 2005
  • 이 연구의 목적은 LED 광중합기(Elipar Freelight $2^{(R)}$, 3M-ESPE, USA)의 조사 mode에 따른 복합레진($Supreme^{(R)}$, Filtek $Flow^{(R)}$, 3M-ESPE, USA)의 수축응력과 미세경도를 평가하는 것이다. 수축응력을 측정하기 위해 스트레인 게이지가 사용되었다. 표본은 조사 mode와 충전방법에 따라 6개의 군으로 나누어졌다. A군 : Filtek $Flow^{(R)}$ 이장, $Supreme^{(R)}$ 충전, 10초 광중합, B군 : Filtek $Flow^{(R)}$ 이장 $Supreme^{(R)}$ 충전, 15초 광중합, C군 : Filtek $Flow^{(R)}$ 이장, $Supreme^{(R)}$ 충전, 15초 soft start 광중합, D군 : $Supreme^{(R)}$ 충전, 10초 광중합, E군 : $Supreme^{(R)}$ 충전, 15초 광중합, F군 : $Supreme^{(R)}$ 충전, 15초 soft start광중합. 스트레인 게이지를 아크릴릭 링에 부착하고 strainmeter에 연결한 후 광중합하고 10분 동안 1초 간격으로 측정하고 기록하였다. 24시간 후에 각각 표본의 미세경도를 측정하였다. 결과는 ANOVA와 Tukey test를 이용해 통계학적으로 분석하였다. 결과는 다음과 같았다. 1. Soft start curing 했을 때 수축응력이 낮았다(p<0.05). Flowable resin을 이장한 군에서는 효과가 없었다. 2. 10초간 조사한 군은 15초간 조사한 군에 비해 수축응력이 적었다(p<0.05). 3. 미세경도 측정결과 상면과 하면에서 각 군 간에 차이는 없었다(p>0.05). 하지만, 하면의 미세경도가 상면에 비해 80%에 이르지 못했다.

  • PDF

외항선사의 북극해항로 진출에 관한 결정요인 분석 (The Analysis on the Determinants of Shipping Lines's entering the Arctic Sea Route)

  • 손경령
    • 한국항만경제학회지
    • /
    • 제35권4호
    • /
    • pp.1-16
    • /
    • 2019
  • 지구 온난화에 따른 북극해의 해빙면적이 감소하면서, 북극해를 통한 선박 운항의 상용화 문제가 지속적으로 주목받고 있다. 특히 아시아와 유럽을 있는 북동항로의 경우, 기존의 수에즈항로에 비해 거리적으로 훨씬 짧음에 따라, 전통적인 항로를 대체할 항로로 그 경제성에 대한 많은 선행연구들이 진행되고 있으며, 많은 연구들이 경제성에 긍정적인 결과를 내놓고 있다. 하지만, 2013년부터 2019년까지의 추세를 보았을때, 실질적으로 북동항로를 통과한 화물(Transit Cargo)의 증가는 크게 이루어지지 않았다. 이러한 상황에서 본 연구는 외항선사 중 외국 선사 2곳과, 국적 선사 2곳의 임원을 대상으로 심층 인터뷰와, 인터뷰의 결과를 따른 4가지 상위기준으로 컨테이너 운송의 내부적 제약요인, 외부적 제약요인 그리고 외항선사의 내부 조직의 목표와 비전, 북극해항로 이용을 통한 경제성을 선정하였고, 각 상위기준 별 하위기준을 4~5가지로 추출하여 총 17가지 하위기준의 중요도를 계층분석법으로 실증하였다. 상위기준의 첫째는 선사의 비전과 목표로 선사가 신 시장을 창출하는데 북극의 가치와, 요구되는 선사의 의지 및 역량을 평가하는 내부적 강점이다. 둘째, 선사의 북극해항로 진출에 관련한 내부 제약성으로 북극해항로에 진출에 대한 부정적 요인과 선사의 역량적 한계를 유발하는 내부적 약점을 의미한다. 셋째, 북극해항로 이용으로 인한 경제성으로 북극해의 미래 경제적 가치와 북극해 연안국으로부터 북극해 및 북극 진출과 개발과 관련한 협력으로 선사에게 제공되는 외부적 기회 요인이다. 마지막으로 북극해항로의 외부제한성으로 북극해항로 이용하기까지 해결되어야 할 외부적 선결 과제로 기상조건과 연안국의 통항정책, 그리고 북극해 주변국의 북극해항로 관심의 증대로 인한 새로운 경쟁의 장이 생성될 가능성을 의미한다. 분석의 결과로 외국적 외항선사와 국적 외항선사로 구분하여 북극해항로 진출에 관한 국내외 외항선사 상호 간 북극해항로 진출에 관한 결정요인에 대한 인식차이를 파악하였다. 이러한 결과로 북극해항로를 운송 상의 제약점, 진출 기회요인에 관한 각 선사별 견해와 함의를 이끌어냈으며, 외항선사의 북극해 진출과 북극해운송의 원활한 이용을 위해 선사들의 대응과, 협력 및 원활한 통항을 위하여 정부 간의 협력의 필요성을 제시하였다.

상아질-레진 계면의 공초점 현미경적 형태 및 전단결합강도와의 관계 (CONFOCAL LASER SCANNING MICROSCOPIC MORPHOLOGY OF DENTIN-RESIN INTERFACE AND ITS RELATIONSHIP WITH SHEAR BOND STRENGTH)

  • 최낙원;조병훈;손호현
    • Restorative Dentistry and Endodontics
    • /
    • 제24권2호
    • /
    • pp.310-321
    • /
    • 1999
  • In this in vitro study, confocal laser scanning microscopic morphology of dentin-resin interface and its relationship to shear bond strength were investigated after the exposed dentin surfaces were treated with 3 different kinds of dentin adhesive systems[three-step; Scotchbond Multi-Purpose Plus(SMPP), self-priming bonding resin; Single Bond(SB), self-etching primer; Clearfil Liner Bond 2(LB2)]. 52 extracted human molar teeth without caries and/or restorations. The experimental teeth were randomly divided into three groups of seventeen teeth each. In five teeth of each group, class V cavities(depth: 1.5mm) with 900 cavosurface angles were prepared at the cementoenamel junction on buccal and lingual surfaces. Bonding resins of each dentin adhesive system were mixed with rhodamine B. Primer of SMPP was mixed with fluorescein. In group 1. the exposed dentin was conditioned with etchant, applied with above primer and bonding resin of SMPP. In group 2, with etchant and self-priming bonding agent of SB. In group 3, with self-etching primer and bonding agent of LB2. After treatment with dentin adhesive systems, composite resin were applied and photocured. The experimental teeth were cut longitudinally through the center line of restoration and grounded so that about $90{\mu}m$-thick wafers of buccolingually orientated dentin were obtained. And, $70{\sim}80{\mu}m$-thick wafers sectioned horizontally, thus presenting a dentinal tubules at 900 to the cut surface of a remaining tooth, were obtained. Primer of SMPP mixed with rhodamine B was applied to these wafers. Confocal laser scanning microscopic investigations of these wafers were done within of 24 hours after treatment. To measure shear bond strength, the remaining twelve teeth of each group were grounded horizontally below the dentinoenamel junction, so that no enamel remained. After applying dentin adhesive systems on the dentin surface, composite was applied in the shape of cylinder. The cylinder was 5mm in diameter, and 2mm in thickness. Shear bond strength was measured using Instron with a cross-head speed of 0.5mm/min. It was concluded as follows ; 1. Hybrid layer of SMPP(mean: $4.56{\mu}m$) was thicker than that of any other groups. This value was not statistically significant thicker than that of SB(mean: $3.41{\mu}m$, p>0.05), and significant thicker than that of LB2(mean: $1.56{\mu}m$, p<0.05). There was a statistical difference between SB and LB2(p<0.05). 2. Although there were variations in the length of resin tag even in a sample, and in a group, most samples in SMPP and SB showed resin tags extending above $20{\mu}m$. But samples in LB2 showed resin tags of $10{\mu}m$ at best. 3. Besides primer's infiltration into demineralized peritubular dentin and dentinal tubules, fluorophore of primer was detected in the lateral branches of dentinal tubules. 4. All groups demonstrated statistically significant differences from one another(p<0.05), with shear bond strengths given in descending order as follows: SMPP(18.3MPa), SB(16.0MPa) and LB2(12.4MPa). 5. LB2 having thinnest hybrid layer($1.56{\mu}m$) showed the lowest shear bond strength(12.4MPa).

  • PDF

백서에서 치수절단술에 사용하는 TheraCal LC, MTA 그리고 Formocresol의 비교 (Comparison of TheraCal LC, Mineral trioxide aggregate, and Formocresolas pulpotomy agents in rat molar)

  • 이빈나;송영상;이고운;김영훈;장훈상;황윤찬;오원만;황인남
    • 대한치과재료학회지
    • /
    • 제44권2호
    • /
    • pp.187-195
    • /
    • 2017
  • Formocresol (FC)은 치수절단술에 일반적으로 사용되어 온 재료이지만, 재료의 독성 때문에 현재 calcium hydroxide나 mineral trioxide aggregate (MTA)가 치수절단술에 널리 사용되고 있다. 최근 레진계열 calcium silicate 제재인 Theracal LC가 치수 이장재로 개발이 되었으며, 이는 광중합을 통해 경화되기 때문에 사용이 편리해서 MTA를 적용할 수 없는 치아에 사용할 수 있다. 이번 연구의 목적은 FC, MTA 및 Theracal LC를 각각 치수절단술 후에 적용했을 경우 경조직 형성 능력과 치수반응을 비교하는 것이다. Sprague Dawley Rat의 상악 대구치 치수절단술 후 FC, MTA 및 Theracal LC를 적용하였다. 경조직 형성 여부를 확인하기 위해 Skyscan을 사용해 마이크로 컴퓨터 단층촬영(micro CT) 이미지를 획득하고, he matoxylin and e osin (H&E) 염색을 하여 조직학적 반응을 확인하였다. Dentin matrix protein-1 (DMP-1)의 발현을 확인하기 위해 면역형광 염색을 시행하였다. FC를 사용한 시편에서는 경조직 형성이 관찰되지 않았으며, 치수절단술이 시행된 인접면에 염증반응이 관찰되었고 DMP-1발현은 확인되지 않았다. MTA와 Theracal LC를 사용한 시편에서는 경조직 형성이 관찰되었고 DMP-1의 발현이 확인되었다. 결론적으로, MTA나 Theracal LC를 사용한다면 남아있는 치수의 생활력과 기능을 유지시켜 보다 좋은 치료 예후를 기대할 수 있을 것으로 사료된다.

근위 상완골 종양 치료 실패 후 역 견관절 전치환물을 이용한 구제술 (Salvage with Reverse Total Shoulder Arthroplasty after the Failure of Proximal Humeral Tumor Treatment)

  • 전대근;조완형;김범석;박환성
    • 대한정형외과학회지
    • /
    • 제53권6호
    • /
    • pp.505-512
    • /
    • 2018
  • 목적: 상완골 근위부 절제 후 다양한 재건술이 시도되었으나 역 견관절 전치환술의 도입으로 기능적 결과의 향상이 있었다. 그러나 광범위한 골결손을 동반한 경우에도 이 방법을 적용할 수 있는지와 비수술적 치료 실패 후 지연 재건하면 기능회복의 정도가 어떤지에 대해서는 불확실하다. 대상 및 방법: 상완골 근위부 재건술 후 실패한 11예는 중첩 동종골과 역 견관절 전치환술의 조합술을, 비수술적 치료가 실패한 6예는 지연 역 견관절 전치환술을 시행하였다. 수술 전, 후 기능적 결과를 비교하였으며 합병증을 기술하였다. 결과: 역 견관절 전치환술과 동종골 조합술로 일차 수술이 실패한 11예 전부에서 안정된 재건술이 가능하였으며 수술 전 주 증상도 해소되었다. 골 접합부 평균 골유합 기간은 5.5개월이었다. 수술 전, 후 근골격계 기능 점수는 평균 20.3점에서 25.7점으로 증가하였다. 일차 수술 후 4년 이내에 역 견관절 전치환술로 치환한 6예 중 4예에서 $90^{\circ}$ 이상의 상지 거상이 가능하였으며, 일차 수술 후 4년 이후에 수술한 5예는 견관절의 안정성은 얻었으나 전부 $90^{\circ}$ 이상 거상이 불가능하였다. 합병증은 관절탈구와 무균성 감염이 각각 1예로 폴리에틸렌 교체와 반흔 조직 절제술로 치료하였다. 비수술적 치료 실패로 지연 역 견관절 전치환술을 한 6예에서 기능평가 점수는 향상되었으나 전 예에서 상지의 $90^{\circ}$ 이상 거상은 불가능하였다. 결론: 중첩 동종골과 역 견관절 전치환술의 조합술은 대량의 상완골 골결손이 발생한 환자에서 간단하고 합병증이 적은 골질 회복방법으로 생각된다. 진단 시 근위 상완골 전 절제가 필요한 전이성 골종양 환자는 조기에 역 견관절 전치환술을 하는 것이 기능유지에 도움이 될 것으로 생각된다.

수도(水稻)의 가리시비반응(加里施肥反応)과 시비량추정(施肥量推定)을 위한 가리공급력(加里供給力) 측정방법(測定方法) 평가(評価) -I. Q/I 관계(関係)에 의(依)한 가리(加里) 공급력측정(供給力測定)과 시비반응(施肥反応) (Evaluation of the Parameters of Soil Potassium Supplying Power for Predicting Yield Response, K2O Uptake and Optiumum K2O Application Levels in Paddy Soils)

  • 박량호;안수봉;박천서
    • 한국토양비료학회지
    • /
    • 제16권1호
    • /
    • pp.42-49
    • /
    • 1983
  • 토양(土壤)의 가리공급력(加里供給力)에 따른 시비량(施肥量) 추정(推定)에 활용(活用)하기 위(為)하여 수도(水稻)의 출수기(出穗期) 및 시험전(試実前) 토양(土壤)의 Q/I관계(関係)에서 Potential Buffering Capacity($PBC^K$)와 ${\delta}K$ = 0 일 때의 가리활동도비(加里活動度比) $[K^+/{\sqrt{Ca^{{+}{+}}+Mg^{{+}{+}}}:m/{\ell}]:AR^K_o$, 및 상대가리(相対加里) 활성도비(活性度比) Kas/Kai를 구(求)하고 이들 요인(要因)의 상호관계(相互関係)와 이들 요인과 수도(水稻)의 가리흡수량(加里吸收量) 및 정조수량(正租收量)과의 관계(関係)를 비교(比較) 검토(検討)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 항온처리기간중(恒溫処理其間中)(67일간(日間)) 비치환성가리(非置換性加里)가 치환성가리(置換性加里)로 변화(変化)되는 양(量)이 거의 없었으므로 시험전(試験前) 토양(土壤)의 가리공급력(加里供給力)은 주(主)로 치환성가리(置換性加里)의 함량(含量)에 의(依)하여 지배(支配)된다고 판단(判断)되였다. 2. 시험전(試験前) 토양(土壤)의 Q/I 관계(関係)에서 조사(調査)된 $PBC^K$는 식양토(埴壤土) 0.027, 양토(壤土) 0.014 사양토(砂壤土) 0.009 (${\frac{me/100g}{m/{\ell}}}$)이며 $AR^K_o$는 식양토(埴壤土) $9.1{\times}10^{-3}$ 양토(壤土) $7.6{\times}10^{-3}$ 사양토(砂壤土) $15.4{\times}10^{-3}(m/{\ell})$으로 토성(土性)에 따라 차이(差異)가 있었다. 3. 출수기(出穗期) 토양(土壤)에서 조사(調査)된 가리성분(加里成分)의 완충능(緩衝能), $PBC^K$를 시험전(試験前) 토양(土壤)의 그것과 비교(比較)할때, 토성(土性)과 시비수준(施肥水準)에 관계없이 비교적(比較的) 안정적(安定的)였음으로 가리(加里)의 공급력(供給力)이나 경토(耕土)의 개량가부(改良加否)에 활용(活用)될 수 있을 것으로 판단(判断)되었다. 4. 출수기(出穗期) 토양(土壤)의 $AR^K_o$는 그 값이 가리시용량(加里施用量)에 관계(関係)없이 가리(加里) 무시용시(無施用時) $AR^K_o$값과 일치(一致)하는 경우(境遇)에 가리증시(加里增施)에 따른 벼 증수(增收)가 현저(顕著)하였다. 5. 출수기(出穗期) 토양(土壤)의 Q/I 관계(関係)에서 조사(調査)된 $PBC^K$$AR^K_o$는 단독적(単独的)으로 사용(使用)보다 복합적(複合的)으로 사용(使用)할 때 가리흡수량(加里吸收量) 및 정조수량(正租收量) 공(共)히 상관(相関)이 높았다. 6. 시험전(試験前) 토양(土壤)의 Kas/Kai 추정치(推定値)와 출수기(出穗期) 토양(土壤)의 $AR^K_o$과는 높은 상관(相関)을 보여 서로 유사(類似)한 토양(土壤) 화학적(化学的) 요인(要因)으로 판단(判断)되며 가리시비량(加里施肥量) 추정(推定)에 활용(活用)될 수 있는 가능성(可能性)을 보였다.

  • PDF

Computer Aided Innovation 역량이 연구개발역량에 미치는 효과: 국내 중소기업을 대상으로 (The Effects of the Computer Aided Innovation Capabilities on the R&D Capabilities: Focusing on the SMEs of Korea)

  • 심재억;변무장;문효곤;오재인
    • Asia pacific journal of information systems
    • /
    • 제23권3호
    • /
    • pp.25-53
    • /
    • 2013
  • This study analyzes the effect of Computer Aided Innovation (CAI) to improve R&D Capabilities empirically. Survey was distributed by e-mail and Google Docs, targeting CTO of 235 SMEs. 142 surveys were returned back (rate of return 60.4%) from companies. Survey results from 119 companies (83.8%) which are effective samples except no-response, insincere response, estimated value, etc. were used for statistics analysis. Companies with less than 50billion KRW sales of entire researched companies occupy 76.5% in terms of sample traits. Companies with less than 300 employees occupy 83.2%. In terms of the type of company business Partners (called 'partners with big companies' hereunder) who work with big companies for business occupy 68.1%. SMEs based on their own business (called 'independent small companies') appear to occupy 31.9%. The present status of holding IT system according to traits of company business was classified into partners with big companies versus independent SMEs. The present status of ERP is 18.5% to 34.5%. QMS is 11.8% to 9.2%. And PLM (Product Life-cycle Management) is 6.7% to 2.5%. The holding of 3D CAD is 47.1% to 21%. IT system-holding and its application of independent SMEs seemed very vulnerable, compared with partner companies of big companies. This study is comprised of IT infra and IT Utilization as CAI capacity factors which are independent variables. factors of R&D capabilities which are independent variables are organization capability, process capability, HR capability, technology-accumulating capability, and internal/external collaboration capability. The highest average value of variables was 4.24 in organization capability 2. The lowest average value was 3.01 in IT infra which makes users access to data and information in other areas and use them with ease when required during new product development. It seems that the inferior environment of IT infra of general SMEs is reflected in CAI itself. In order to review the validity used to measure variables, Factors have been analyzed. 7 factors which have over 1.0 pure value of their dependent and independent variables were extracted. These factors appear to explain 71.167% in total of total variances. From the result of factor analysis about measurable variables in this study, reliability of each item was checked by Cronbach's Alpha coefficient. All measurable factors at least over 0.611 seemed to acquire reliability. Next, correlation has been done to explain certain phenomenon by correlation analysis between variables. As R&D capabilities factors which are arranged as dependent variables, organization capability, process capability, HR capability, technology-accumulating capability, and internal/external collaboration capability turned out that they acquire significant correlation at 99% reliability level in all variables of IT infra and IT Utilization which are independent variables. In addition, correlation coefficient between each factor is less than 0.8, which proves that the validity of this study judgement has been acquired. The pair with the highest coefficient had 0.628 for IT utilization and technology-accumulating capability. Regression model which can estimate independent variables was used in this study under the hypothesis that there is linear relation between independent variables and dependent variables so as to identify CAI capability's impact factors on R&D. The total explanations of IT infra among CAI capability for independent variables such as organization capability, process capability, human resources capability, technology-accumulating capability, and collaboration capability are 10.3%, 7%, 11.9%, 30.9%, and 10.5% respectively. IT Utilization exposes comprehensively low explanatory capability with 12.4%, 5.9%, 11.1%, 38.9%, and 13.4% for organization capability, process capability, human resources capability, technology-accumulating capability, and collaboration capability respectively. However, both factors of independent variables expose very high explanatory capability relatively for technology-accumulating capability among independent variable. Regression formula which is comprised of independent variables and dependent variables are all significant (P<0.005). The suitability of regression model seems high. When the results of test for dependent variables and independent variables are estimated, the hypothesis of 10 different factors appeared all significant in regression analysis model coefficient (P<0.01) which is estimated to affect in the hypothesis. As a result of liner regression analysis between two independent variables drawn by influence factor analysis for R&D capability and R&D capability. IT infra and IT Utilization which are CAI capability factors has positive correlation to organization capability, process capability, human resources capability, technology-accumulating capability, and collaboration capability with inside and outside which are dependent variables, R&D capability factors. It was identified as a significant factor which affects R&D capability. However, considering adjustable variables, a big gap is found, compared to entire company. First of all, in case of partner companies with big companies, in IT infra as CAI capability, organization capability, process capability, human resources capability, and technology capability out of R&D capacities seems to have positive correlation. However, collaboration capability appeared insignificance. IT utilization which is a CAI capability factor seemed to have positive relation to organization capability, process capability, human resources capability, and internal/external collaboration capability just as those of entire companies. Next, by analyzing independent types of SMEs as an adjustable variable, very different results were found from those of entire companies or partner companies with big companies. First of all, all factors in IT infra except technology-accumulating capability were rejected. IT utilization was rejected except technology-accumulating capability and collaboration capability. Comprehending the above adjustable variables, the following results were drawn in this study. First, in case of big companies or partner companies with big companies, IT infra and IT utilization affect improving R&D Capabilities positively. It was because most of big companies encourage innovation by using IT utilization and IT infra building over certain level to their partner companies. Second, in all companies, IT infra and IT utilization as CAI capability affect improving technology-accumulating capability positively at least as R&D capability factor. The most of factor explanation is low at around 10%. However, technology-accumulating capability is rather high around 25.6% to 38.4%. It was found that CAI capability contributes to technology-accumulating capability highly. Companies shouldn't consider IT infra and IT utilization as a simple product developing tool in R&D section. However, they have to consider to use them as a management innovating strategy tool which proceeds entire-company management innovation centered in new product development. Not only the improvement of technology-accumulating capability in department of R&D. Centered in new product development, it has to be used as original management innovative strategy which proceeds entire company management innovation. It suggests that it can be a method to improve technology-accumulating capability in R&D section and Dynamic capability to acquire sustainable competitive advantage.