• Journal of Power Electronics
• /
• 제9권2호
• /
• pp.288-299
• /
• 2009

This paper proposes a feedback linearization control scheme of AC/DC PWM converters with LCL input filters using no damping resisters. Feedback linearization techniques use a transformation from nonlinear system models into equivalent linear models in a simpler form. The feedback linearization scheme in this work has cascade structures unlike usual feedback linearization, therefore it has an advantage that it is possible to limit the capacitor current to a certain level. The performance of the proposed controller is validated with simulation and experimental results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1253-1256
• /
• 1996

In this paper, a new nonlinear feedback linearization control scheme for induction motors is developed. The control scheme employs a fuzzy nonlinear identification scheme based on fuzzy basis function expansion to adoptively compensate the parameter variations, i.e. rotor resistance, mutual and self inductance etc. An important feature of the proposed control scheme is to incorporate the sliding mode controller into the scheme to speed up convergence rate. Simulation tests show the robust behavior of the proposed controller in the presence of the parameter uncertainties of the machine.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.216-220
• /
• 1999

In this paper, the feedback linearization technique is used with the sliding mode control for nonlinear system. The combination of these two control techniques can be achieved by proposing a novel sliding surface which has the nonminal dynamics of the original system controlled by feedback linearization technique. The noble design of the sliding surface is based on the augmented system whose dynamics have a higher order than that of the original system. The reaching phase is removed by using an initial virtual state which makes the initial sliding function equal to zero

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권3호
• /
• pp.200-209
• /
• 2008

This paper describes bandwidth linearization techniques in phase-locked loop (PLL) design for common-clock serial link applications. Utilizing a continuously tunable single-input dual-path LC VCO and a constant-gain phase detector, a proposed architecture is well suited to implementing PLLs that must be compliant with standards that specify minimum and maximum allowable bandwidths such as PCI Express Gen2 or FB-DIMM applications. A prototype 4.75 to 6.1-GHz PLL is implemented in 90-nm CMOS. Measurement results show that the PLL bandwidth and random jitter (RJ) variations are well regulated and that the use of a differentially controlled dual-path VCO is important for deterministic jitter (DJ) performance.

• 동력기계공학회지
• /
• 제6권3호
• /
• pp.49-56
• /
• 2002

This study suggests a trajectory tracking controller composed of an input output linearization compensator and a linear controller. The input output linearization compensator is derived from the nonlinear equations of a pneumatic control system and it algebraically transforms a nonlinear system dynamics into a linear one, so that input output characteristics of the control system is linearized regardless of the variation of the operating point and linear control techniques can be applied. The results of nonlinear simulations show that the proposed controller tracks the given trajectories more accurately than a state feedback controller does.

• 한국해양공학회지
• /
• 제1권1호
• /
• pp.57-64
• /
• 1987

Methods of nonlinear stochastic analysis of guyed towers are studied in this paper. Two different kinds of nonlinearities are considered. They are the nonlinear restoring force from the guying system and the nonlinear hydrodynamic force. Analyses are carried out mainly in the frequency domain using linearization techniques. Two methods for the linearization of the nonlinear stiffness are presented, in which the effects of the steady offset and the oscillating component of the structural motion can be adequately analyzed. those two methods are the equivalent linearization method and the average stiffness method. The linearization of the nonlinear drag force is also carried out considering the effect of steady current as well as oscillatory wave motions. Example analyses are performed for guyed tower in 300m water. Transfer functions and the expected maximum values of the deck displacement and the bending moment near the middle of the tower are calculated. Numerical results show that both of the frequency domain methods presented in this paper predict the responses of the sturcture very reasonably compared with those by the time integration method utilzing the random simulations wave particla motions.

• 대한전자공학회논문지TE
• /
• 제42권3호
• /
• pp.25-30
• /
• 2005

대부분의 경우, 비선형 최적 제어 문제는 헤밀톤-야코비 방정식(Hamilton-Jacobi equations)을 풀어야하는데, HJEs는 해석적으로 답을 구하기가 매우 어렵다. 그래서 이러한 어려움은 비선형 시스템에 피드백 선형화를 적용하여, 선형화된 시스템을 얻고, 선형화된 선형 시스템에 대한 최적 제어 문제를 고려하게 되었다. 본 논문에서는 간단한 비선형 시스템의 예에 최적 제어 설계 기법과 피드백 선형화 제어기, 선형 제어기를 적용하여, 최적 성능을 평가함으로서, 피드백 선형화 최적 제어가 적용되는 비선형 시스템의 조건을 제시한다.

• 한국생산제조학회지
• /
• 제19권1호
• /
• pp.121-127
• /
• 2010

We consider the robust trajectory tracking control problem for a skid steering mobile robots. A dynamic model is derived accounting for the effects of wheel skidding. The control design utilizes the dynamic feedback linearization techniques, so as to obtain a predictable behavior for the instantaneous center of rotation thus preventing excessive skidding. The additive controller using the sliding mode type is then robustified against the unmodelled dynamics and parameter uncertainty. Simulation results show the good performances under excessively uncorrected estimations of the longitudinal forces and the lateral resistive forces caused by the skidding of the wheels in tracking trajectories.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.912-914
• /
• 1999

In this paper, the feedback linearization technique is used with the sliding mode control for discrete nonlinear systems. This combination of the two control techniques is achieved by Proposing a novel sliding surface which has the nominal dynamics of the original system controlled by feedback linearization technique. Its design is based on the augmented system whose dynamics have a higher order than that of the original system. The reaching Phase is removed by using an initial virtual state which makes the initial sliding function equal to zero.

• ETRI Journal
• /
• 제39권1호
• /
• pp.76-86
• /
• 2017

In this study, we propose an automatic contrast enhancement method based on transfer function modification (TFM) by histogram equalization. Previous histogram-based global contrast enhancement techniques employ histogram modification, whereas we propose a direct TFM technique that considers the mean brightness of an image during contrast enhancement. The mean point shifting method using a transfer function is proposed to preserve the mean brightness of an image. In addition, the linearization of transfer function technique, which has a histogram flattening effect, is designed to reduce visual artifacts. An attenuation factor is automatically determined using the maximum value of the probability density function in an image to control its rate of contrast. A new quantitative measurement method called sparsity of a histogram is proposed to obtain a better objective comparison relative to previous global contrast enhancement methods. According to our experimental results, we demonstrated the performance of our proposed method based on generalized measures and the newly proposed measurement.