• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.8
• /
• pp.1444-1448
• /
• 2010

The ball and beam system is one of the most popular models for studying control systems because of its nonlinearity and several control techniques have been proposed. Sliding mode control is a popular robust control method which rejects the external disturbance. In this paper, we propose a robust controller using the ${\epsilon}$-sliding surface. On the ${\epsilon}$-sliding surface, the system robustness and convergence can be manipulated via a use of ${\epsilon}$. We show the stability analysis and convergence analysis on the ${\epsilon}$-sliding surface. In addition, the experimental results show the validity of the proposed controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.598-603
• /
• 2005

In this study, an adaptive control scheme with a pre-specified $H_{\infty}$ property is proposed for the tracking control of linear induction motor (LIM) drive system. Under the influence of uncertainties and external disturbances, by using nonlinear decoupling and parameter tuner, the robust performance control problem is formulated as a nonlinear $H_{\infty}$ problem and solved by a quadratic storage function. This new design method is able to track the step and several periodic commands with improved performance in face of parameter perturbations and external disturbances. Simulation and experimental results are provided to demonstrate the effectiveness of the proposed adaptive $H_{\infty}$ controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1928-1933
• /
• 2005

This Paper is about landing control of legged robot. Body stiffness and damping is used as landing strategy of a legged robot. First, we only used stiffness control method to control legged robot landing. Second control method,sliding mode controller and feedback linearization controller is applied to enhance position control performance. Through these control algorithm, body center of gravity behaves like mass with spring & damping in vertical direction on contact regime.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.4
• /
• pp.243-250
• /
• 2003

In this paper, the speed controller of permanent-magnet synchronous motor (PMSM) using the RBF neural (NN) disturbance observer is proposed. The suggested controller is designed using the input-output feedback linearization technique for the nominal model of PMSM and incorporates the RBF NN disturbance observer to compensate for the system uncertainties. Because the RBF NN disturbance observer which estimates the variation of a system parameter and a load torque is employed, the proposed algorithm is robust against the uncertainties of the system. Finally, the computer simulation is carried out to verify the effectiveness of the proposed method.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.693-695
• /
• 1999

In this paper, the adaptive nonlinear state observer is proposed to estimate the internal states and the nonlinearities of 4-cylinders 4-cycles spark ignition(SI) engines. The observed states and nonlinearities will be used to design the adaptive feedback linearization controller for reducing the fluctuation of idle speed. The simulation results are represented to show the validity of the proposed nonlinear observer-based adaptive controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.108.1-108
• /
• 2001

A time-delay feedback control approach is proposed for making a given stable continuous-time Takagi-Sugeno (TS) fuzzy system chaotic, which is based on the fuzzy feedback linearization and a suitable approximate relationship between a time-delay differential equation and a discrete map. The time-delay feedback controller, chosen among several candidates, is a simple sinusoidal function of the delay states of the system, which has small amplitude. This approach is mathematically proven for rigorous generation of chaos from stable continuous-time TS fuzzy systems, where the generated chaos is in the sense of Li and Yorke. Numerical examples are included to visualize the theoretical analysis and the controller design.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.472-475
• /
• 1995

In this paper, we investigate so-called the falling cat problem. It is well known that a cat, when released from an upside down configuration starting from rest, is able to land on her feet without violating angular momentum conservation. This has being an interesting problem for engineers for a long time. We consider a model of a falling cat as connected two rigid columns, which is a nonholonomic system. We design the controller for it, using time- state control form of the model and exact linearization technique. Finally, we test the controller thorough simulation on the model of a falling cat.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.263-268
• /
• 1990

This paper deals with the manipulator with actuator described by equation D over bar(q) $q^{...}$ = u-p over bar (q, $q^{.}$, $q^{..}$) with a control input u. We imploy a simple method of control design which bas two stages. First, a global linearization is performed to yield a decoupled controllable linear system. Then a controller is designed for this linear system. We provide a rigorous analysis Of the effect of uncertain dynamics, which we study using robustness results In time domain based on a Lyapunav equation and the total stability theorem. I)sing this approach we simulate the performance of controller about a robotic manipulator with actuator.tor.r.

• International Journal of Aeronautical and Space Sciences
• /
• v.14 no.4
• /
• pp.379-386
• /
• 2013

The hemispherical resonator gyroscope is a type of vibratory gyroscope, which can measure angle or angular rate, based on its operating mode. This paper deals with the case when the hemispherical resonator gyroscope is operated in angle measurement mode. In angle measurement mode, the resonator pattern angle precesses, with respect to the external rotation input, by the principle of the Coriolis effect, so that the external rotation can be estimated, by measuring the amount of precession angle. However, this pattern angle drifts, due to the manufacturing error of the resonator. Since the drift effect causes degradation of the angle estimation performance of the resonator, the corresponding drift compensation control should be performed, to enhance the estimation performance. In this paper, a mathematical model of the hemispherical resonator gyro is first introduced. By using the mathematical model, a nonlinear observer for imperfection parameter estimation, and the corresponding compensation controller are designed to operate hemispherical resonator gyros, as angle measurement sensors.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.921-925
• /
• 1988

An attractive approach to speed of induction motors is to achieve full linearization via appropriate feedback. However, the prior results toward this direction are based on full feedback. In practice, rotor fluxes are not directly measurable but can be estimated using observers. We propose a nonlinear feedback controller with an observer. As t${\rightarrow}{\infty}$, the closed-loop system with our controller becomes as if it were a linearly decoupled system. We provide the stability analysis of our control method. Simulation and experimental results are also included to demonstrate the practical significance of our results.