• 한국강구조학회 논문집
• /
• 제20권1호
• /
• pp.21-31
• /
• 2008

응답면기법(RSM, Response surface method)은 복잡한 구조물의 매우 작은 발생확률이나 신뢰성해 석에서 폭넓게 사용된다. MCS(Monte-Carlo Simulation)방법은 어떤 시스템의 평가에서도 사용될 수 있으나 해석시간이 파괴확률의 역수에 비례하게 되어 발생확률이 매우 희박한 시스템의 평가에 불리하다. 확률유한요소해석법은 이러한 MCS의 한계점을 해결해 줄 수 있는 대안이 될 수 있다. 그러나 이 방법은 평균과 표준편차 등이 모델링 (내부 프로그래밍)된 특별한 프로그램에서만 적용 가능하며 임의의 범용소프트웨어의 응답을 모델링하거나 임의의 프로그램의 특성을 이용할 수가 없다. RSM방법은 복잡한 구조시스템에서 응답에 대한 회귀모델을 구성하여 효율적인 해석단계를 통해 시간과 노력을 획기적으로 절감시킬 수 있다. 그러나 RSM의 정확도는 한계상태방정식의 선형성과 축점간의 거리에 영향을 받게 된다. 이런 단점을 해결하기 위해 한계상태방정식의 선형성과 무관하게 정확한 수렴해를 구하기 위한 개선된 적응적 응답면기법을 개발하고 선형과 2차형식의 응답면방정식에 대한 2가지 예를 들어 검증하였다. 검증결과 가장 효율적인 RSM기법을 결정하였다. 개발된 선형적응적가중응답 면기법 (linear adaptive weighted response surface method, LAW-RSM)은 비적응적이거나 비가중형식의 2차 RSM기법에 비해서 정해의 신뢰성지수에 가장 근접한 정확성과 수렴성을 나타낸다.

• 한국자동차공학회논문집
• /
• 제15권6호
• /
• pp.102-107
• /
• 2007

A fast response $CO_2$ ($fCO_2$) analyzer for real-time measurement of carbon dioxide concentration during transient states of internal combustion engines has been developed. This analyzer uses non-dispersive infrared absorption (NDIR) technique for measuring $CO_2$ concentration and Kalman filter for removing noise components from output signals. The analyzer has good linearity, repeatability and drift with a response time of 11 ms; it is sufficiently fast to detect $CO_2$ concentration during transient states of internal combustion engines. The $fCO_2$ analyzer was used to measure transient $CO_2$ concentration of exhaust gas of the SI engine with a standard gas analyzer, and the signal of the $fCO_2$ analyzer was compared to that of the standard gas analyzer. The two concentrations were well matched during the steady state, and the $fCO_2$ analyzer could measure the variations of $CO_2$ concentration during the transient state.

• 센서학회지
• /
• 제18권3호
• /
• pp.222-225
• /
• 2009

This paper describes the fabrication and characteristics of Schottky micro hydrogen sensors for high temperatures by using polycrystalline(poly) 3C-SiC thin films grown on Si substrates with thermal oxide layer using APCVD. Pd/poly 3C-SiC Schottky diodes were made and evaluated by I-V and C-V measurements. Electric current density and barrier height voltage were $2{\times}10^{-3}A/cm^2$ and 0.58 eV, respectively. These devices could operate stably at about 400 $^{\circ}$. The characteristics of implemented sensors have been investigated in terms of sensitivity, linearity of response, response rate, and response time. Therefore, from these results, Pd/poly 3C-SiC Schottky devices have very high potential for high temperature $H_2$ sensor applications.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1576-1577
• /
• 2007

As a intelligent valve piezoelectric valve is to applied to various fields of application. Piezoelectric valves have fast response time and good linearity for pressure control but its hysteresis displacement by its stack actuator influences on pressure control in electro-hydraulic braking. Solenoid valves are traditional element to control hydraulic pressure but this paper proposes piezoelectric valve for brake pressure control with hysteresis compensation.

• Journal of the Korean Wood Science and Technology
• /
• 제48권3호
• /
• pp.364-375
• /
• 2020

In this study, ultrasound-assisted extraction was performed to extract ascorbic acid from rugosa rose (Rosa rugosa Thunb.) fruit. The optimal conditions were investigated by response surface methodology, using two variable including reaction time (16-44 min) and temperature (16-44℃). The ascorbic acid extraction was sensitive to the reaction time rather than the reaction temperature, and the optimal conditions for ascorbic acid extraction were 25℃ and 30 min. Ascorbic acid and gallic acid in the rugosa rose fruit extract were completely separated by HPLC, with a resolution factor of over 1.5 between the two. The correlation coefficient of the ascorbic acid was 0.999 in a linearity test for 50-150 ㎍/mL concentration of extract. The limit of detection and limit of quantification values were 0.16 ㎍/mL and 29.89 ㎍/mL, respectively. The relative standard deviations (RSD) for repeatability and reproducibility were determined, and each RSD showed good precision at less than 5% (N=6).

• 조명전기설비학회논문지
• /
• 제23권2호
• /
• pp.108-114
• /
• 2009

데드존이나 비선형성이 존재하는 자동화 시스템의 고속 정밀제어를 위하여 새로운 하이브리드 적응제어 기를 제안한다. 제안된 시스템은 제어영역을 고속제어 영역과 정밀제어 영역으로 구분하여 제어한다. 먼저 퍼지 제어방식을 이용하여 고속제어를 수행하고, 오차가 설정된 범위 안에 진입하면 지터를 저감시킨 PFD를 이용한 PLL 제어기를 사용하여 정밀제어를 수행한다. 제안된 PFD는 데드존을 발생시키지 않아 지터 잡음과 응답특성을 개선하였다. 이론과 실험적인 연구가 수행되었고, 그 결과는 자동화 시스템의 제어 성능이 개선되었음을 입증한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2516-2520
• /
• 2005

In this paper, finite impulse response (FIR) smoothers are proposed for discrete-time systems. The proposed FIR smoother is designed under the constraints of linearity, unbiasedness, FIR structure, and independence of the initial state information. It is also obtained by directly minimizing the performance criterion with unbiased constraints. The approach to the MVF smoother proposed in this paper is logical and systematic, while existing results have heuristic assumption, such as infinite covariance of the initial state. Additionally, the proposed MVF smoother is based on the general system model that may have the singular system matrix and has both system and measurement noises. Thorough simulation studies, it is shown that the proposed MVF smoother is more robust against modeling uncertainties numerical errors than fixed-lag Kalman smoother which is infinite impulse response (IIR) type estimator.

• Nuclear Engineering and Technology
• /
• 제50권3호
• /
• pp.526-530
• /
• 2018

Human fingernails were used to estimate the radiation dose via electron paramagnetic resonance measurements of radiation-induced radicals. The limiting factors in this research were mechanically induced electron paramagnetic resonance signals due to the mechanical stress during the preparation of the samples. Therefore, different treatment methods of fingernails were used to reduce the mechanically induced signals. The results demonstrate that the mechanically induced and radiation-induced signals have apparently different microwave power saturation behaviors. In addition, the mechanically induced signal shows a fading evolution over time and reaches a constant value. Chemical treatment using the different reagents showed that the minimum mechanically induced signal was obtained using the dithiothreitol reagent. The dose-response curves of the samples treated with dithiothreitol for 30 minutes demonstrated a greater linearity than those of samples treated for 5 minutes. Therefore, to find an unknown absorbed dose in a fingernail sample using a calibration curve, we recommend adopting the mentioned chemical treatment procedure to reduce the uncertainty.

• 전기화학회지
• /
• 제11권1호
• /
• pp.59-63
• /
• 2008

Poly (vinylchloride) (PVC) membrane electrodes based on neutral carrier, tetracycline was prepared as an active sensor for Hg(II) ion, and tested in different contents of the potassium tetrakis (4-chlorophenyl) borate (KTpClPB) as lipophilic salt. Bis (2-ethylhexyl) sebacate (DOS), bis(l-butylpentyl) adipate (BBPA), 2-nitrophenyl octyl ether (NPOE) and dibutyl phthalate (DBP) were used as diverse plasticizing solvent mediators. This electrode shows excellent potentiometric response characteristics and display good linearity with log $[Hg^{+2}]$ versus EMF response, over a range of concentrations between $10^{-7}$ and $10^{-3}M$. With 30.8mV/decade Nernstian slope, the detection limit was $6.9{\times}10^{-9}M$ and the response time was less than 20s. The proposed electrode yields very good selectivity for mercury (II) ion over many cations such as alkali, alkaline earth, transition and heavy metal ions. And it shows a very stable potential values in a wide pH range. This reliable electrode prepared was kept at least a month without considerable alteration in their response to Hg (II) ion.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.99-104
• /
• 2001

Discrete-time controller design is proposed using feedback system identification in frequency domain. System Stability imposed by a new controller is checked in the function of a conventional closed-loop system, instead of a poorly modeled plant due to non-linearity and disturbance as well as unstable components, etc. The stability of the system is evaluated in view of Popov criterion. All the equations are formulated in the framework of the discrete-time system. Simulation results are shown on the plant with input saturation components, DC disturbance and a pure integration.