• The Journal of the Korea Contents Association
• /
• v.15 no.12
• /
• pp.355-369
• /
• 2015

Purpose: This study aimed to identify on the attitudes toward the life support care among elderly people using Q methodology. Methods: Thirty-nine elderly people classified 34 selected Q statements into a shape of normal distribution using a 9 point scale. The obtained data were analyzed by using a PQ Method PC program. Results: Principal component analysis identified 4 types of the attitudes toward the life support care among elderly people. Type I is "Situational & Self-determination linear type", type II is "Destiny & Life support care denied type", type III is "Avoidant & Family decision emphasis type" and type IV is "Respect for life & life support care approved type". Most of elderly people have been attitude that wish to receive honor their own decisions toward the prolongation treatment. Conclusion: The findings indicate a need to policy guidelines and public information that express self-determination of elderly people.

• Journal of Korean society of Dental Hygiene
• /
• v.17 no.3
• /
• pp.527-537
• /
• 2017

Objectives: The purpose of this study was to examine the practice of oral hygiene behaviors and oral health status of long-term care facility residents and to analyze the factors related to salivary hemoglobin level which can predict active periodontal disease. Methods: From 30th October 2015 to 7th January 2016, a questionnaire was provided to 63 participants and their dental plaque and saliva samples were collected to assess the levels of salivary hemoglobin and dental plaque acidogenicity. In order to analyze the factors related to salivary hemoglobin level, multiple linear regression analysis was performed. Results: Toothbrushing was most frequently performed by the participants themselves (98.4%) and toothbrushing was performed after eating breakfast (81.3%). 68.8% of participants reported brushing their tongue. 35.9% of participants perceived having bad teeth, and 87.5% had high dental caries activity. The percentages of participants with hyposalivation and ${\geq}0.20{\mu}g/ml$ salivary hemoglobin level were 45.3% and 59.4%, respectively. The salivary hemoglobin level was significantly higher in the group in which stimulated salivary flow rate was ${\leq}0.70ml/min$, dental plaque acidogenicity was superior, and perceived having bad teeth (p<0.05). There was also a tendency for the salivary hemoglobin level to increase with age (p<0.05). Conclusions: Oral health status of the long-term care facility residents was still not improved, and the characteristics of salivary volume and dental plaque were important factors affecting salivary hemoglobin level. Therefore, it is necessary to operate an oral hygiene intervention program by oral health professionals in such facilities in order to provide residents with effective oral care aligned with their respective needs. Furthermore, it is necessary for caregivers to complete mandatory oral health education to improve the oral hygiene status of the long-term care facility residents.

• Journal of Biosystems Engineering
• /
• v.37 no.5
• /
• pp.314-318
• /
• 2012

Purpose: This study was conducted to develop a measurement system for determining photosynthetic photon flux (PPF) distribution and illumination efficiency of LED lamps. Methods: The system was composed of a linear moving sensor part (LMSP), a rotating part to turn the LMSP, a body assembly to support the rotating part, and a motor controller. The average PPF of the LED lamp with natural cooling and water cooling was evaluated using the measurement system. Results: The PPF of LED lamp with water cooling was 3.1-31.7% greater than that with natural cooling. Based on the measured value, PPF on the horizontal surface was predicted. Illumination efficiency of the LED lamp was slightly increased with water cooling by 3.4%, compared with natural cooling. A simulation program using MATLAB was developed to analyze the effects of the vertical distance from lighting sources to growing bed, lamp spacing, and number of LED lamps, on the PPF distribution on the horizontal surface. The uniformity of the PPF distribution of the LED lamps was fairly improved with 15 cm spacing, as compared to the 5 cm spacing. By simulation, PPF of $217.0{\pm}27.9{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ was obtained at the vertical distance of 40 cm from six LED lamps with 12 cm spacing. This simulated PPF was compared to the measured one of $225.9{\pm}25.6{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. After continuous lighting of 346 days, the relative PPF of LED lamps with water cooling and natural cooling was decreased by 6.6% and 22.8%, respectively. Conclusions: From these results, it was concluded that the measurement system developed in this study was useful for determining PPF and illumination efficiency of artificial lighting sources including LED lamp.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.15 no.3
• /
• pp.250-260
• /
• 2005

This study was designed to find the symptom prevalence rates of musculoskeletal disorders and the risk factors of musculoskeletal disorders among selected hair dressers. Methods; The survey were conducted from July 1 to 30, 2004 for 459 hair dressers working in Seoul and Gwangju using self-administration questionnaire. The risk factors on musculoskeletal disorders have analysed by multiple linear regression analysis. The results of this study are summarized as follows: The experience rate of musculoskeletal disorders symptom in the last one year was 56.4%. The experience rates of each body parts were 36.4% on the shoulders, 30.5% on the legs and the feet, 28.5% on the low back, 27.0% on the hand and the fingers, 23.3% on the neck and 17.0% on the arms and the elbows. The prevalence rate of musculoskeletal disorders symptom in the last one week was 40.5%, those of each body parts were 24.0% on the legs and the feet, 21.4% on the shoulders, 20.7% on the low back, 15.7% on the hand and the wrists, 15.0% on the neck, 9.4% on the arms. The risk factors on musculoskeletal disorders were working posture(${\beta}=0.32$), perceived stress(${\beta}=0.19$), working period(${\beta}=0.16$), standing working over 10 hour(${\beta}=0.16$), hard working(${\beta}=0.11$). The adjusted determinant coefficient($R^2$) of this regression model was 0.267. Based on the results, in order to prevent musculoskeletal disorders of hair dressers, working posture shall be improved and leisure opportunities to relieve stress, and health management program shall be provided.

• Journal of Korean Society on Water Environment
• /
• v.31 no.6
• /
• pp.653-664
• /
• 2015

TPLMS (Total water pollutant load management system) that is the most powerful water-quality protection program have been implemented since 2004. In the implementation of TPLMS, target water-quality and permissible discharged load from each unit watershed can be decided by water-quality modeling. And NPS (Non-point sources) discharge coefficients associated with certain (standard) flow are used on estimation of input data for model. National Institute of Environmental Research (NIER) recommend NPS discharge coefficients as 0.15 (Q₂₇₅) and 0.50 (Q₁₈₅) in common for whole watershed in Korea. But, uniform coefficient is difficult to reflect various NPS characteristics of individual watershed. Monthly NPS discharge coefficients were predicted and estimated using surface flow and water-quality from HSPF watershed model in this study. Those coefficients were plotted in flow duration curve of study area (Palger stream and Geumho C watershed) with monthly average flow. Linear regression analysis was performed about NPS discharge coefficients of BOD, T-N and T-P associated with flow, and R² of regression were distributed in 0.893~0.930 (Palger stream) and 0.939~0.959 (Geumho C). NPS Discharge coefficient through regression can be estimated flexibly according to flow, and be considered characteristics of watershed with watershed model.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.572-578
• /
• 2003

The free vibration of a spinning flexible disk-spindle system supported by hydro dynamic bearings in a HDD is analyzed by FEM. The spinning flexible disk is described using Kirchhoff plate theory and von Karman non-linear strain, and its rigid body motion is also considered. It is discretized by annular sector element. The rotating spindle which includes the clamp, hub, permanent magnet and yoke, is modeled by Timoshenko beam including the gyroscopic effect. The flexible supporting structure with a complex shape which includes stator core, housing, base plate, sleeve and thrust pad is modeled by using a 4-node tetrahedron element with rotational degrees of freedom to satisfy the geometric compatibility. The dynamic coefficients of HDB are calculated from the HDB analysis program, which solves the perturbed Raynolds equation using FEM. Introducing the virtual nodes and the rigid link constraints defined in the center of HDB, beam elements of the shaft are connected to the solid elements of the sleeve and thrust pad through the spring and damper element. The global matrix equation obtained by assembling the finite element equations of each substructure is transformed to the state-space matrix-vector equation, and the associated eigenvalue problem is solved by using the restarted Arnoldi iteration method. The validity of this research is verified by comparing the numerical results of the natural frequencies with the experimental ones. Also the effect of supporting structures to the natural modes of the total HDD system is rigorously analyzed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.6
• /
• pp.876-888
• /
• 1986

The Study is concerned with the analysis of unconstrained axisymmetric piercing as a nonsteady forging process by the rigid-plastic finite element method. In the numerical analysis of axisymmetric piercing, the initial velocity field is generated by assuming the material as a linear viscous material to begin with in order to facilitate the input handling and to ensure better convergencey. The strain-hardening effect for nonsteady deformation and the friction of the die-material interial interface are considered in the formulation. Rigid body treatment is also incorporated in the developed program. The experiments are carried out for aluminum alloy specimens (A1204) with different specimen heights. It is shown that the experimental results are in excellent agreement with the finite element simulations is deformed configuration. For load prediction the theoretical prediction shows excellent agreement with th eexperimental laod in the initial stage of loading before fracture of the specimen is not initiated. Distribution of stresses, strains and strain rates has been found for the given cases in computation. On this basis several fracture criteria are introduced in order to check the fracture initiation. It is found that maximum shear criterion is capable of good fracture prediciton.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.1
• /
• pp.1-9
• /
• 2000

In the recent day, the necessity and the effective usage are increased rapidly, and it is applied in many other fields as well as in the field of ortho-photo map. In this study, we extract each objects on the aerial image and automatically classify graphic information to produce digital map using only digital ortho-image without particular drawing devices for producing digital map. For this purpose, we have applied a lot of the image processing techniques and fuzzy theory, classified outline and lane of road and building, and had each layer according to each feature. Especially, in the case of the building, the outer vector lines extracted by pixel unit at the building were very complex, but we have developed the program to be expressed by I-dimensional linear type between building corners. In the result of this study, we could not extract and recognize all of the object on the image all together, but we have got the error within 50cm using semi-automatic technique. Therefore, this method will be used effectively in producing 1/5,000 digital map.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.2
• /
• pp.125-135
• /
• 2011

The latest study for formulation of finite element method and computation techniques has progressed widely. The classical method in the formulation of frame elements for geometrically nonlinear analysis derives the geometric stiffness directly from the governing differential equation for bending with axial force. From the computational viewpoint of this paper, the most common approach is the finite element method. Commonly, the formulation of frame elements for geometrically nonlinear structures is based on appropriate interpolation functions for the transverse and axial displacements of the member. The formulation of flexibility-based elements, on the other hand, is based on interpolation functions for the internal forces. In this paper, a new method is used to suppose that interpolation functions for the displacements from the curvatures is Lagrangian interpolation. This paper derives flexibility matrix from that displacement functions and is considered the application of it. Using the flexibility matrix, this paper apply the program considered geometrically nonlinear analysis to common problems.

• Journal of Korean society of Dental Hygiene
• /
• v.20 no.4
• /
• pp.435-445
• /
• 2020

Objectives: This study investigated the relationship between obesity and dental caries of Korean adolescents. Methods: Data from the Korea National Health and Nutrition Examination Survey (KNHNES VI) (2013 to 2015) were used and targeted adolescents aged 13 to 18 years. For statistical analysis, the SPSS 18.0 program was used, and the significance level was set at 0.05. Results: For the general and health-related characteristics, female students (p=0.001) showed higher decayed, missing, and filled teeth (DMFT) index than male students. Furthermore, DMFT showed higher tendency, as age was higher (p<0.001). Smoking (p=0.011) and drinking experience (p=0.027) revealed higher DMFT. The dental caries experience was significantly different among students who were female (p=0.033), older (p=0.001), and overweight or underweight (p=0.022). In the BMI for the general and health-related characteristics, male students had higher obesity rate than female students (p=0.003), and obese subjects had higher dental checkup in the last year (p=0.013). In multiple linear regression analysis of obesity and DMFT, the unadjusted model showed that the obesity group's DMFT was about 0.8 higher than that of the normal group (p=0.024). However, statistical significance was not shown in the adjusted models. In the logistic regression analysis of obesity and dental caries experience, the unadjusted model 1 (1.93 times), the adjusted model 2 (1.79 times), and model 3 (1.76 times) showed significantly higher dental caries experience. Conclusions: Both obesity and dental caries are related to diet habits and lifestyles and have a negative impact on adult health. Therefore, it is necessary to create a healthy social environment around the adolescent, and proper intervention through education is required to form healthy habits.