• 제목/요약/키워드: Linear process

검색결과 3,205건 처리시간 0.031초

서지 보호기의 열화 특성과 온라인 진단장치 (Deterioration Characteristics and an On-Line Diagnostic Equipment for Surge Protective Devices)

  • 박경수;왕국명;황성철;김선재;길경석
    • 한국전기전자재료학회논문지
    • /
    • 제29권10호
    • /
    • pp.635-640
    • /
    • 2016
  • This paper dealt with the deterioration characteristics and an on-line diagnosis equipment for SPDs (surge protective devices). An accelerated aging test was carried out using a $8/20{\mu}s$ standard lightning impulse current to analyze the changes of electrical characteristics and to propose the diagnostic parameters and the criterion for deterioration of ZnO varistor which is the core component of SPDs. Based on the experimental results, an on-line diagnosis equipment for SPD was fabricated, which can measure the total leakage current, reference and clamping voltage. The leakage current measurement circuit was designed using a low-noise amplifier and a clamp type ZCT. A linear controller, the leakage current measurement part and a HVDC were used in the measurement of reference voltage. The measurement circuit of clamping voltage consisted of a surge generator and a coupling circuit. In a calibration process, measurement error of the prototype equipment was less than 3%.

The Investigation on Thermal Aging Characteristics of Oil-Paper Insulation in Bushing

  • Liao, Rui-jin;Hu, En-de;Yang, Li-jun;Xu, Zuo-ming
    • Journal of Electrical Engineering and Technology
    • /
    • 제10권3호
    • /
    • pp.1114-1123
    • /
    • 2015
  • Bushing is the key link to connect outer and inner insulating systems and also the essential electric accessory in electric power system, especially in the high voltage engineering (AC 1000kV, DC 800kV). This paper presented the experimental research of thermal aging characteristic of oil-paper insulation used in bushing. A thermally accelerated aging experiment at 90℃ was performed. The bushing models containing five layers of paper were sealed into the aging vessels and further aged for 250 days. Then several important parameters associated with the aging were observed and evaluated. The results showed that the degree of polymerization (DP) of papers gradually decreased. The DP values of outermost layer and middle layer fit well into the second-order kinematic model and first-order kinematic model, respectively. Less deterioration speed of the inter-layer paper than outer layer was confirmed by the variation of DP. Hydrolysis was considered as the main cause to this phenomenon. In addition, the logarithm of the furfural concentrations in insulation oil was found to have good linear relationship with DP of papers. Interestingly, when the aging time is about 250 days and DP is 419, the aging process reaches an inflection point at which the DP approaches the leveling off degree of polymerization (LODP) value. Both tanδ and acid number of oils increased, while surface and volume resistivity of papers decreased. The obtained results demonstrated that thermal aging and moisture absorbed in papers brought great influence to the degradation of insulating paper, leading to rapid decrease of DP and increase of the tanδ. Thus, the bushing should be avoided from damp and real-time monitoring to the variation of tanδ and DP values of paper is an effective way to evaluate the insulation status of bushing.

Hemoglobin-DNA/pyterpy 박막을 이용한 과산화수소의 전기화학적 검출 (Electrochemical Detection of Hydrogen Peroxide based on Hemoglobin-DNA/pyterpy Modified Gold Electrode)

  • 이동윤;최원석;박상현;권영수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2008년도 제39회 하계학술대회
    • /
    • pp.1295-1296
    • /
    • 2008
  • Hydrogen peroxide ($H_2O_2$) biosensor is one of the most developing sensors because this kind of sensors is highly selective and responds quickly to the specific substrate. Hemoglobin (Hb) has been used as ideal biomolecules to construct hydrogen peroxide biosensors because of their high selectivity to $H_2O_2$. The direct electron transfer of Hb has widely investigated for application in the determination of $H_2O_2$ because of its simplicity, high selectivity and intrinsic sensitivity. An electrochemical detection for hydrogen peroxide was investigated based on immobilization of hemoglobin on DNA/Fe(pyterpy)$^{2+}$ modified gold electrode. The pyterpy monolayers were firstly an electron deposition onto the gold electrode surface of the quartz crystal microbalance (QCM). It is offered a template to attach negatively charged DNA. The fabrication process of the electrode was verified by quartz crystal analyzer (QCA). The experimental parameters such as pH, applied potential and amperometric response were evaluated and optimized. Under the optimized conditions, this sensor shows the linear response within the range between $3.0{\times}10^{-6}$ to $9.0{|times}10^{-4}$ M concentrations of $H_2O_2$. The detection limit was determined to be $9{\times}10^{-7}$ M (based on the S/N=3).

  • PDF

단순 지적과업 중 인간과오 관련 심리생리학적 특성의 변화 (Variation of Psychophysiological Characteristics Related with Human Errors during a Simple Pointing Task)

  • 임현교
    • 한국안전학회지
    • /
    • 제24권3호
    • /
    • pp.71-78
    • /
    • 2009
  • During a learning process, a human being is assumed to experience knowledge-based behaviors, rule-based behaviors, and skill-based behaviors sequentially if Rasmussen was right. If any psycho-physiological symptom to those different levels can be obtained, it can be useful as a measure whether a human being is fully trained and has gotten a skill in his work. Therefore, this study aimed to draw relationships between human performance measures and psycho-physiological measures while committing a computer-simulated pointing task by utilizing the power spectrum technique of EEG data, especially with the ratio of relative beta-to-alpha band power. The result showed that, during correct responses, the ratio came to stabilize as all the performance data went stable. However, response time was not a simple linear function of task difficulty level only, but a joint function of task characteristics as well as behavior levels. Comparing relative band power ratios from errors and correct responses, activated states of one's brain could be explained, and characteristics of the task could understood. To tell that of pointing task, correlations around C3, C4, P3, P4 and 01, 02 area were significant and high in correct response cases whereas most correlation coefficients went down in error cases standing for imbalance of psycho-motor functions. Though task difficulty was the only one factor that could influence on relative band power ratio with statistical significance, it should be comprehended to mean a different way of expression indicating task characteristics since at least error-some situation could be explained with the help of relative band power ratio that absolute band power failed.

Evaluation of selection program by assessing the genetic diversity and inbreeding effects on Nellore sheep growth through pedigree analysis

  • Illa, Satish Kumar;Gollamoori, Gangaraju;Nath, Sapna
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제33권9호
    • /
    • pp.1369-1377
    • /
    • 2020
  • Objective: The main objectives of the present study were to assess the genetic diversity, population structure and to appraise the efficiency of ongoing selective breeding program in the closed nucleus herd of Nellore sheep through pedigree analysis. Methods: Information utilized in the study was collected from the pedigree records of Livestock Research Station, Palamaner during the period from 1989 to 2016. Genealogical parameters like generation interval, pedigree completeness, inbreeding level, average relatedness among the animals and genetic conservation index were estimated based on gene origin probabilities. Lambs born during 2012 and 2016 were considered as reference population. Two animal models either with the use of Fi or ΔFi as linear co-variables were evaluated to know the effects of inbreeding on the growth traits of Nellore sheep. Results: Average generation interval and realized effective population size for the reference cohort were estimated as 3.38±0.10 and 91.56±1.58, respectively and the average inbreeding coefficient for reference population was 3.32%. Similarly, the effective number of founders, ancestors and founder genome equivalent of the reference population were observed as 47, 37, and 22.48, respectively. Fifty per cent of the genetic variability was explained by 14 influential ancestors in the reference cohort. The ratio fe/fa obtained in the study was 1.21, which is an indicator of bottlenecks in the population. The number of equivalent generations obtained in the study was 4.23 and this estimate suggested the fair depth of the pedigree. Conclusion: Study suggested that the population had decent levels of genetic diversity and a non-significant influence of inbreeding coefficient on growth traits of Nellore lambs. However, small portion of genetic diversity was lost due to a disproportionate contribution of founders and bottlenecks. Hence, breeding strategies which improve the genetic gain, widens the selection process and with optimum levels of inbreeding are recommended for the herd.

DEM을 이용한 유출역의 도시 (Representation of Runoff Area by means of DEM)

  • 김주철;윤여진
    • 대한토목학회논문집
    • /
    • 제32권5B호
    • /
    • pp.287-293
    • /
    • 2012
  • 본 연구의 목적은 지형지수를 기반으로 유역의 포화도 및 그에 따른 유출역의 변화를 도시할 수 있는 방법론을 제시해 보고자 하는 것이다. 지형지수의 산정에는 ${\infty}$-흐름방향방법을 적용하여 8-흐름방향방법이 갖는 고정된 흐름방향에 대한 구속에서 벗어남과 동시에 최소한의 흐름분산 모의를 가능하게 하였다. 산정된 지형지수의 도수분포도를 작성해 본 결과 동일한 유역에 대하여 수행된 기존의 연구 성과와 유사하게 나타나 본 연구에서 제안한 방법론에 대한 신뢰성을 확인할 수 있었다. 여누가확률밀도함수의 형태로 정의되는 포화도의 개념에 따라 포화토층의 공간적 분포를 도시해 본 결과 유역의 가변성 유출역에 대한 명시적인 접근을 가능하게 하여 강우-유출현상의 동적특성이나 비선형성에 대한 합리적인 분석 수단을 제공할 수 있을 것으로 판단된다.

변형된 데이터베이스와 선택적 연산을 이용한 WLAN 실내위치인식 알고리즘 (Indoor localization algorithm based on WLAN using modified database and selective operation)

  • 성주현;박종성;이승희;서동환
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제37권8호
    • /
    • pp.932-938
    • /
    • 2013
  • 최근 WLAN을 이용한 실내 위치인식 방법 중 하나인 Fingerprint 기법은 신호의 반사 및 굴절에 의한 페이딩 현상에 강인하여 많이 연구되고 있다. 그러나 이 방법은 신호의 수집과 데이터베이스와 측정된 신호의 비교 연산의 과정에서 요구되는 시간과 연산량이 많다. 본 논문에서는 연산량을 줄이기 위하여 제안한 변형된 데이터베이스를 기반으로 실시간으로 수집되는 신호의 선택적 연산을 이용한 WLAN 실내 위치인식 알고리즘을 제안한다. 제안한 알고리즘은 신호의 세기에 따른 선형보간과 문턱치를 통하여 데이터베이스의 구성 시간 및 크기를 줄이고, 실시간으로 측정되는 신호의 선택적 연산을 통해 연산량은 감소시키면서 위치정확도를 유지하였다. 실험결과 제안한 알고리즘은 실내 복도 환경에서 기존의 Fingerprint 기법 대비 정확도를 17.8% 향상시켰으며 연산량은 평균 46% 감소되는 것을 확인하였다.

도서지역 고등학생을 위한 흥미로운 수학지도 방안 (On the Attractive Teaching Methods of Mathematics for High School students in Island's region)

  • 박형빈;이헌수
    • 한국학교수학회논문집
    • /
    • 제8권4호
    • /
    • pp.481-494
    • /
    • 2005
  • 본 연구는 대학에서 연구와 교육을 통하여 축적된 수학교육에 대한 노하우를 상대적으로 소외된 도서지역 고등학생들에게 제공함으로써 고급지식 및 이론의 확산에 힘쓰고자 한다. 연구는 삶의 지혜를 얻기 위한 수학, 실용능력을 배양하기 위한 실용수학, 자신의 품격을 높이기 위한 교양 수학으로 나누어 진행하며 수학 공부를 해야 하는 이유, 수학문제 해결력을 증진시키는 방안, 수학 기기를 이용한 수학학습, 암호이론 및 게임이론 소개, GSP를 이용한 도형학습, 수학과 스포츠, 수학과 예술 등을 포함하여 교재를 개발하고 개발된 교재를 통하여 대학원생을 훈련하고 수업계획안에 따라 수업을 하게 하는 도서지역 고등학생을 위한 흥미롭고 효과적인 수학지도 방안을 연구한다.

  • PDF

18세기 조선산학서의 대수 영역에 나타난 서양수학 표현 및 계산법 연구 (A Study of the Representation and Algorithms of Western Mathematics Reflected on the Algebra Domains of Chosun-Sanhak in the 18th Century)

  • 최은아
    • 한국학교수학회논문집
    • /
    • 제23권1호
    • /
    • pp.25-44
    • /
    • 2020
  • 본 연구의 목적은 서양수학이 본격적으로 유입된 18세기 조선의 사회문화적 배경 하에 저슬된 조선 산학서의 대수 영역에서 서양수학의 표현과 계산법을 반영한 내용을 살펴보고, 서양식 계산법과 전통적 계산법의 공존 관계 또는 대체 양상을 분석하는 것이다. 이를 위해 18세기 산학문헌인 <구수략>, <고사신서>, <고사십이집>, <주해수용>을 중심으로 하여 <구일집>, <산학입문> 등 총 9종의 산학문헌을 분석하였다. 분석 결과, 산대 조작을 기반으로 하는 전통적인 사칙계산법이 과도기적 표현을 거쳐 유럽 수학의 필산으로 발달해가는 과정과 서양의 비례 개념과 비례식을 형식화하여 명시적으로 다루는 18세기 산학서의 공통적 변화를 확인하였다. 또한 연립일차방정식 해법의 계산식의 수학적 표현이 점진적으로 형식화되는 과정을 관찰하였다. 제곱근 계산법이 전통적인 개방술에서 증승개방법의 적용으로, 다시 유럽 산술이 반영된 제곱근을 구하는 필산으로 변화해가고 있음을 확인하였다. 이상의 18세기 조선산학 사례들은 수학의 진화적 속성과 사회문화적 속성을 이해할 수 있는 의미 있는 자료라고 할 수 있다.

가스압력을 이용한 자유벌징에서 성형양 최대화를 위한 두께 분포 최적화 (Study of Blank Thickness Optimization in Free Bulging for Maximizing Bulged Height)

  • 유준태;윤종훈;이호성;윤성기
    • 대한기계학회논문집A
    • /
    • 제38권8호
    • /
    • pp.899-904
    • /
    • 2014
  • 자유벌징에 있어서 성형 높이를 최대화하기 위하여 블랭크의 두께 분포를 최적화 하였으며, 등가정하중을 이용한 구조최적화법을 사용하였다. 두께형상은 부드러운 곡선으로 나타내기 위하여 베지어곡선을 사용하였고 제어점의 위치가 설계변수이며, 최대 변형률을 일정 값으로 제한하였다. 사용된 소재는 인코넬 718 이며 최적화된 두께분포로 가공된 블랭크를 이용한 자유벌징 시험을 수행하여 평판형 블랭크를 사용한 결과보다 22% 더 높은 성형 높이를 얻었다. 최적화결과에서 예측된 변형형상, 정점에서의 변형 경향, 두께분포가 실험에서 얻은 결과와 유사하여 최적화 과정의 유효성을 입증하였고, 최적화 결과가 실제 구현될 수 있음을 검증하였다.