• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.192-196
• /
• 1988

This paper presents a feasibility study related to the design of a linear multivariable compensator for a model of boiler-turbine system. The nonlinear dynamics are linearized at a operating condition. At the operating point an LQG/LTR compensator is designed. Simulations are included to illustrate the usefulness of this linear multivariable control law.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.238-243
• /
• 1986

Distillation columns are widely used in almost every chemical plant. The use of multivariable control for such units is attractive because of the strong interactions exhibited between outputs and inputs and the desire to control simultaneously both top and bottom products. In this research design of a robust multivariable controller for distillation column was considered; output feedback controller with proportional and integral modes was designed using pole assignment. The transfer function matrix was obtained by fitting the step response realtions between single input double output pairs of variables. This matrix was then converted to linear time invariant state space model by multivariable realization technique. With the proposed multivariable proportional and integral controller applied to the process, the result of the digital computer simulation showed a good performance of asymtotic tracking. The limited experimental performance of this multivariable control was compared with the result from simulation. It was found that the proposed controller performed satisfactorily for the distillation column which separated binary mixture of methanol and water.

• 전기의세계
• /
• v.31 no.4
• /
• pp.296-302
• /
• 1982

The computer algorithm and program are developed to obtain the Luenberger Canonical form and the transform matrices for linear time invariant multivariable control systems. The model controller of an eigth order system, which assigns the modes of the multivariable control systems and closed-loop matrices are computed numerically by the developed programs. It is shown that the computed results coincide with the Luenberger's and Kalman's method. The gain of the model controller has varied from 10$^{-3}$ to 10$^{5}$ by the modes assignment of the open-loop system.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.456-458
• /
• 1986

A method for on-line tuning of the PID-controller parameters for a discrete-time multivariable process system is presented. And it is based on a step change in the controller set point. The system is presumed to be a linear, open loop stable and known one. The controller parameters are determined by the performance criterion and Fletcher-Powell methods.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1847-1852
• /
• 2004

This article provides the connection between feedback stabilization and interpolation conditions for n-D linear systems (n > 1). In addition to internal stability, if one demands performance as a design goal, then there results an n-D matrix Nevanlinna-Pick interpolation problem. Application of recent work on Nevanlinna-Pick interpolation on the polydisk yields a solution of the problem for the 2-D case. The same analysis applies in the n-D case (n > 2), but leads to solutions which are contractive in a norm (the "Schur-Agler norm") somewhat stronger than the $H^{\infty}$ norm. This is an analogous version of the connection between the standard $H^{\infty}$ control problem and an interpolation problem of Nevanlinna-Pick type in the classical 1-D linear time-invariant systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.710-713
• /
• 1996

This paper deals with the fault detection problem in uncertain linear multivariable systems having both model mismatch and noise. A robust detection presented by Kwon et al.(1994) for SISO systems has been here extended to the multivariable systems are derived. The model mismatch includes here linearization error as well as undermodelling. Comparisons are made with alternative fault detection method which do not account noise. The new method is shown to have good performance.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.6
• /
• pp.500-505
• /
• 2000

This paper deals with wafer temperature uniformity control essential in rapid thermal processing (RTP). One of the important control objectives of RTP is to keep the temperature over the wafer surface as uniformly as possible. For this, a discrete time state equation around the operating point is first identified by using the subspace fitting method, and a multivariable LQG(Linear Quadratic Gaussian) controller is designed based on the identified model. Simulation and experimental results show improvement in temperature uniformity over the conventional PID method.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.9
• /
• pp.1754-1760
• /
• 2011

In this paper, a systematic design of a robust nonlinear multivariable variable structure controller based on state dependent nonlinear form is presented for the control of MIMO uncertain affine nonlinear systems with mismatched uncertainties and matched disturbance. After a MIMO uncertain affine nonlinear system is represented in the form of state dependent nonlinear system, a systematic design of a robust nonlinear variable structure controller is presented. To be linear in the closed loop resultant dynamics, the linear sliding surface is applied. A corresponding diagonalized control input is proposed to satisfy the closed loop global exponential stability and the existence condition of the sliding mode on the linear sliding surface, which will be investigated in Theorem 1. Through a design example and simulation study, the usefulness of the proposed controller is verified.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.841-846
• /
• 1990

In this study, a design method to obtain a robust suboptimal regulator for linear multivariable system is presented. This new design method is based on the optimal regulator design method using eigen-structure assignment and it uses additional cost function which represent robustness of the closed loop system. When we design the regulator using pole assignment method for linear multivariable system we have extra degree-of-freedom after assigning desired eigenvalues of the closed loop system in determining the feedback gain. So we assign additional robust suboptimal regulator. In this study we also feedback the system output for more practical applications.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.535-540
• /
• 1989

This paper presents an approach for designing a linear multivariable servo mechanism for the case of constant and time varying disturbances. In this paper, we use an "observer-based" approach to consider the disturbance vector as states of the system and the resulting servomechanism design involves the design of an asymptotic observer which estimates both the actual plant states and the disturbance states. The design makes use of switching dynamics instead of switching logics to obtain the sliding mode and from the switching dynamics we can remove the undesirable chattering phenomena.phenomena.