• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.26.4-26
• /
• 2001

This paper proposes a dynamic observer that is applicable to linear time-invariant systems subject to unknown inputs. The proposed method utilizes the output feedback control structure to design an unknown input observer. We name it as the dynamic unknown input observer(UIO). The dynamic UIO can be designed easily compared to the usual static UIO, and the system response could be improved.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제11권4호
• /
• pp.275-279
• /
• 2011

In this paper, an observer-based sampled-data controller of linear system is proposed for the wave energy converter. Based on the sampled-data observer, the controller is design. In the closed-loop system with controller, it obtains the norm inequality between the continuous-time state variable and the discrete-time one. Using the norm inequality, sufficient condition is derived for the asymptotic stability of the closed-loop system and formulated in terms of linear matrix inequality. Finally, the wave energy converter simulation is provided to verify the effectiveness of the proposed technique.

• 한국융합학회논문지
• /
• 제4권4호
• /
• pp.41-48
• /
• 2013

Observer design for system with unknown input was carried out. First, Kalman filter was considered to estimate system state with White noise. With the results of Kalman filter design, state observer, controller properties, including controllability and observability, and the Kalman filter structure and algorithm were also studied. Kalman filter algorithm was applied to Position and velocity measurement based on Kalman filter with white noise, and it was constructed and achieved by programming based on Matlab programming. Finally, observer for system with unknown input was constructed with the help of Gershgorin's disc theorem. With the designed observer, system states was constructed and applied to system with unknown input. By simulation results, estimation performance was verified. In this project, state feedback control theory, observer theory and relevant design procedure, as well as Kalman filter design were understood and used in practical application.

• 한국기계가공학회지
• /
• 제11권5호
• /
• pp.48-53
• /
• 2012

A non-linear vehicle model and an observer are designed to observe the yaw rate and the body side slip angle when a vehicle is turning maneuver in this study. The developed vehicle model is a full car model and has fourteen degree of freedom. A Luenberg observer is applied to develop the observer. The vehicle model is validated with a reference result and shows good accordance. The observer is tested on dry asphalt, wet asphalt and snow paved road. The results prove the performance of observer is robust and reliable.

• 대한기계학회논문집
• /
• 제12권2호
• /
• pp.215-220
• /
• 1988

본 연구에서는 비례제어하였을 때 정정한 시스템(K=1.0)과 진동 현상을 보이는 시스템(K=20)을 제어대상으로 설정한 후, 관측기의 상태변수를 이용하여 이들을 피이드백 제어하였을 때 응답 특성이 개선될 수 있는지를 조사하고자 한다.

• 대한기계학회논문집A
• /
• 제30권10호
• /
• pp.1249-1254
• /
• 2006

Existing adaptive observers may cause the parameter drifts due to disturbances even if state estimation errors remain small. To avoid the drift phenomena in the presence of bounded disturbances, several robust adaptive observers have been introduced addressing bounds in state and parameter estimates. However, it is not easy for these observers to manipulate the size of the bounds with the selection of the observer gain. In order to reduce estimation errors, this paper introduces the (equation omitted) gain minimization problem in the adaptive observer structure, which minimizes the (equation omitted) gain between disturbances and estimation errors. The stability condition of the adaptive observer is reformulated as a linear matrix inequality, and the observer gain is optimally chosen by solving the convex optimization problem. The estimation performance is demonstrated through a numerical example.

• 조명전기설비학회논문지
• /
• 제24권10호
• /
• pp.26-32
• /
• 2010

This paper proposes a new load torque observer based on the Takagi-Sugeno fuzzy method for a permanent magnet synchronous motor(PMSM). A Linear Matrix Inequality(LMI) parameterization of the fuzzy observer gain is given, and the LMI conditions are derived for the existence of the fuzzy load torque observer guaranteeing $\alpha$-stability and linear quadratic performance. In this paper, a nonlinear speed controller is employed to validate the performance of the proposed fuzzy load torque observer, and various simulation results are presented under motor parameter and load torque variations.

• 한국자동차공학회논문집
• /
• 제20권3호
• /
• pp.58-66
• /
• 2012

This paper describes a design and a verification of linear state observers for a motorized seat belt system to estimate state information such as angular velocity and load torque. The motorized seat belt system provides functions to protect passengers and improve passenger's convenience. To realize these functions, sensors which can measure an angular velocity and load torque are needed. By use of the linear state observer, state information can be estimated without sensors. The motorized seat belt system is analysed and represented as a state space model which contains load torque as an augmented state. By the developed state space model, a full and reduced order observer are designed and verified by experiments. The full and reduced order observer are also compared from points of view of execution time and noise robustness.

• 한국지능시스템학회논문지
• /
• 제16권4호
• /
• pp.506-511
• /
• 2006

본 논문에서는 비선형 시스템의 슬라이딩 모드 관측기 설계에 대해서 논의한다. 제어 대상인 비선형 시스템을 모델링 하는데 있어서 Takagi-Sugeno(T-S) 퍼지 모델 기법을 이용하였고, 이때 발생할 수 있는 모델 불확실성과 외란에 대해 그 것의 최대 최소 범위를 안다고 가정하였다. 제안된 시스템의 LMI (Linear Matrix Inequality)를 기반으로 한 슬라이딩 모드 관측기 설계 방법에서는 관측기와 시스템의 차이를 슬라이딩 표면으로 설정한다. 안정한 슬라이딩 표변을 갖는 슬라이딩 관측기의 존재 가능성을 선형 행렬 부등식의 형태로 표현한다. 슬라이딩 모드 관측기 이득은 LMI 존재 조건의 해를 이용하여 구한다. 모의 실험을 통하여 논문에서 제안한 슬라이딩 모드 관측기의 성능을 시험한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.193-193
• /
• 2000

This paper proposes a dynamic observer that is applicable to linear time-invariant systems subject to unknown input, The proposed method utilities Che output feedback control structure to design unknown input observer. We name it as the dynamic unknown input observer(UIO). The dynamic UIO can be designed easily over the usual static UIO, and the system response could be improved.