• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.5
• /
• pp.410-415
• /
• 2001

This paper proposes a new control scheme for the power factor improvement of DC power regenerating systems, which can regenerate the excessive DC power from DC bus line to AC supply in substations for traction systems. From the viewpoint of both power capacity and switching losses, the system is designed on the basis of three-phase square-wave inverters and composed of two inverters, zig-zag connected output transformers, and an AC filter. The output voltages of the regenerating system are not sinusoidal. However, regenerated complex power is analyzed on the basis of fundamental components and thus the reactive power produced by harmonics is not considered. Therefore, it is needed a new control scheme capable of controlling the reactive power nearly to zero even for nonsinusoidal cases. To verify the validity of the proposed control scheme, computer simulations are carried out. And the results show that the power factor is theoretically higher than 0.99.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.5
• /
• pp.927-934
• /
• 2019

Recently, mobile devices have evolved into small computers with various functions according to user requirements. Careful attention must be paid to the design of the power supply network for the stable operation of the application processor (AP), the wireless communication modem, the high performance camera, and the various interfaces of the mobile device to implement various functions of the mobile device. In this paper, we analyzed and verified the method of optimizing the design parameters such as the position, capacity, and number of decoupling capacitors to meet the target impedance required by the driver IC chip to ensure the stability of the power supply network of mobile devices that should be designed as wiring type due to mounting density limitation. The proposed wired power supply network design method can be applied to various applications including high-speed signal transmission line in addition to mobile applications.

• Korean Journal of Optics and Photonics
• /
• v.31 no.1
• /
• pp.31-36
• /
• 2020

We propose a band-switchable terahertz metamaterial based on an etched vanadium dioxide (VO₂) thin film. A line of etched VO₂ thin film was placed in the center gap of the split square-loop shape for the tunability of the metamaterial. The resonance frequency of the metamaterial can be switched from the 1.4 THz band to the 0.7 THz band, according to the insulator-metal phase transition in the VO₂ thin film. The absolute difference in the transmittance of the metamaterial was 78.5% and 65.8% at 0.7 THz and 1.4 THz respectively, according to the band switching. The differential phase shift was around 90°, and the transmittance was stably maintained between 40% and 60% in the middle band of the two switchable resonance-frequency bands.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.1
• /
• pp.1-9
• /
• 1986

This is the third part of the four-part paper describing the development of a packet-switched computer communication network named the KORNET. In this paper we describe the design and implementation of the X.25 protocol connecting packet mode data terminal equipments(PDTE's) with data circuit terminating equipments(DCE's). In the KORNET, the X.25 protocol has been implemented on the line processing module-A(LPMA) of the network node processor(NNP). In the implementation of X.25, we have divided the software module according to the service function, and have determined the the rules that interact between the modules. Each layer protocol has been developed using the technique of the finite state machine. Before the actual coding of softwares, we hafve used formal software development tools based on the specification and description language (SDL) and program design languate (PDL) recommended by the CCITT. In addition, for the efficient operation of the X.25 protocol system we have analyzed the system performance and the service scheduling method of each module. The results will also be given.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.4
• /
• pp.913-920
• /
• 2011

In this paper, a logic process based 1-kbit EEPROM IP for RFID tag chips of 900MHz is designed. The cell array of the designed 1-kbit EEPROM IP is arranged in a form of four blocks of 16 rows x 16 columns, that is in a two-dimensional arrangement of one-word EEPROM phantom cells. We can reduce the IP size by making four memory blocks share CG (control gate) and TG (tunnel gate) driver circuits. We propose a TG switch circuit to supply respective TG bias voltages according to operational modes and to keep voltages between devices within 5.5V in terms of reliability in order to share the TG driver circuit. Also, we can reduce the power consumption in the read mode by using a partial activation method to activate just one of four memory blocks. Furthermore, we can reduce the access time by making BL (bit line) switching times faster in the read mode from reduced number of cells connected to each column. We design and compare two 1-kbit EEPROM IPs, two blocks of 32 rows ${\times}$ 16 columns and four blocks of 16 rows ${\times}$ 16 columns, which use Tower's $0.18{\mu}m$ CMOS process. The four-block IP is smaller by 11.9% in the layout size and by 51% in the power consumption in the read mode than the two-block counterpart.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3491-3498
• /
• 2015

The purpose of this study is to identify demand of fusion education in the field of architecture and urban, according to architecture and urban market changing, product changing, increasing fusion education demand. We conducted online surveys targeting construction and non construction field practitioners so that we want to identify consumer's needs about fusion education in the field of architecture and urban. Research findings can be summarized in three parts. First, practitioners need to fuse business-related majors (Frequency changing ratio : financing(716.7%), management(633.3%), planning(454.5%) etc.) and traditional majors. Second, the survey results show that 79 percent of those questioned were in favor of switching the cyber and off-line operation methods for fusion education. They require the complementary education system between off-line and cyber education based on education accessability. Third, the survey results show that 70.9 percent of those questioned were in favor of limited freestyle(Freedom of choices without required subjects). The curriculum should be arranged according to the flow of construction business process including fusion subjects.

• Journal of Digital Convergence
• /
• v.11 no.12
• /
• pp.245-256
• /
• 2013

This study illustrates factors that determine consumer types based on ways in which they alternate between online and offline channels for searching and eventually buying their desired products. This study conducted an online survey targeting 1,040 consumers. As per the study, consumer types fall into five groups: 1) on-on type(online search${\rightarrow}$online buying), 2) off-off type(offline search${\rightarrow}$offline buying), 3) on-off type(online search${\rightarrow}$offline buying), 4) off-on type(offline search${\rightarrow}$online buying), and, 5) on-off-on type(online search${\rightarrow}$ offline search${\rightarrow}$nline buying). The primary factors that determine how the different consumer types switch between online and offline channels are price orientation, convenience orientation,, risk-aversion orientation, and channel familiarity. Although they feel cross-channel shopping can be cumbersome, the findings show that cross-channel consumers would gladly switch channels to buy cheaper and proven products. The findings of this study will be useful for businesses that have both online and offline channels and point out the theoretical aspects of the decision-making process as consumers switch between channels.

• IMMUNE NETWORK
• /
• v.1 no.1
• /
• pp.61-69
• /
• 2001

Background: To determine the molecular structure of type II collagen-specific T-cell receptors associated with rheumatoid arthritis (RA). Methods: We generated CII-specific T-cell lines of 8 RA patients by prolonged in vitro culture with bovine CII (bCII) and the immunogenic peptide (256-270) of human CII. The proliferation response towards CII stimulation was measured from the uptake of 3H-thymidine. Changes in the secretion of Th 1 and Th2 cytokines in the culture supernatent were measured by ELISA. The TCR clonotypes of these T-cells were examined by RT-PCR/SSCP analyses of all 22 $V_{\beta}$ chains. Results: T-cells from patients' tissue exhibited strong proliferation index upon CII stimulation, which was maintained up to 6 months in the culture. The secretion of INF-$\gamma$from these T-cells increased along with the duration of culture time, while the amount of IL-4 production did not show significant changes. The SSCP band patterns of patients' T-cells appear as discrete bands unlike the smeary streak produced from normal samples. Some SSCP bands, each representing selected expansion of a TCR containing certain subtype of $V_{\beta}$ peptides, appeared to be identical in more than one patients. Among these, the expansion of SSCP band representing the $V_{\beta}$ 14 CDR3 region persisted after switching the antigen to the immunogenic human peptide (256-270). Conclusion: CII-reactive T-cells expressing distinct CDR3 motifs are selectively expanded in the peripheral blood and synovial fluid of RA patients, and their persistent proliferation upon CII stimulation, as well as the production Th 1-type cytokines, may play pivotal roles in RA pathogenesis.

• Journal of Environmental Health Sciences
• /
• v.38 no.6
• /
• pp.561-567
• /
• 2012

Objectives: Parabens are widely used as antimicrobial agents in pharmaceuticals and cosmetics as well as by the food industry. Parabens have been reported to show weak estrogenic activity and be related to health effects such as allergic reactions and skin and breast cancer. We evaluated an online solid phase extraction (SPE) method coupled with LC-MS/MS technique using free and conjugated parent parabens in human urine for assessing human exposure to parabens. Methods: We employed LC/MS/MS through online solid phase extraction and column-switching techniques and analyzed free and conjugated parabens as biomarkers of human exposure. Four major parabens, methyl-paraben (MP), ethyl-paraben (EP), propyl-paraben (PP) and butyl-paraben (BP), were analyzed. Method validation was performed by sensitivity, accuracy, precision and comparison of the results of online SPE with offline SPE. Results: The limits of detection (LOD) were in the range of 0.2-2 ng/mL, and actual limits of quantification (LOQ) were in the range of 0.7-6 ng/mL urine, depending upon the compound. Accuracy was in the range of 98.3-106.4%, and precision was in the range of 1.3-8.7% (CV) depending upon the compound. We found a good correlation between the results of analysis by online SPE method and that by off-line SPE method. Conclusions: The online SPE method showed proper LOD and validated accuracy, precision and good correlation with the offline method for analyzing parabens in urine.

• Journal of the Korean Society of Safety
• /
• v.33 no.1
• /
• pp.28-34
• /
• 2018

The purpose of this study is to fabricate a sensor module to detect the resistive leakage current (Igr) in real time that occurs to low voltage electric lines and to verify its reliability. In the case of the developed sensor module, wires are inserted into the zero current transformer (ZCT) and current transformer (CT) in advance and then the branch line is connected to the circuit breaker. The measurement result of the resistance of the distribution panel equipped with the developed sensor module shows that the resistance is $0.151m{\Omega}$ between the R and R phases, $0.169m{\Omega}$ between the S and S phases, and $0.178m{\Omega}$ between the T and T phases, respectively. The insulation resistance measured at AC 500 V and 1,000 V is $0.08m{\Omega}$ between the R, S, T and N phases, respectively. Then, the insulation resistance measured at DC 500 V is $83.3G{\Omega}$ between the R, S, T and G terminal, respectively. In addition, the applied withstanding voltage is AC 220 V/380 V/440 V and it was found that characteristics between all phases are good. This study measured the standby power by installing the developed sensor module at the rear of the MCCB and switching the circuit breaker on sequentially. The standby power is 1.350 W when one circuit breaker is turned on, 1.690 W when 2 circuit breakers are turned on, and 4.371 W when 10 circuit breakers are turned on. This study also verified the reliability of the standby power of the distribution panel equipped with the developed sensor module using the Minitab Program (Minitab PGM). Since the analysis shows the statistical average of 1.34627 in the reliable range of normal distribution, standard deviation of 0.001874, AD of 0.554, and P value of 0.140, it is found that the distribution panel equipped with the developed sensor module has high reliability.