• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.4
• /
• pp.489-495
• /
• 2018

In this paper, we designed and fabricated WLAN / UWB communication antennas operating at 3.3 [GHz] and 5 [GHz] bands in order to effectively use the high-speed communication network system that improved antenna miniaturization, gain and radiation pattern. Microstrip patch antennas were chosen to improve the bandwidth. The slot width, length, and transmission line width were calculated using the theoretical formula for each step. Simulation results show that the return loss is -14.053 [dB] at 3.3 [GHz] and -13.118 [dB] at 5 [GHz]. The gain showed a value of 2.479 [dBi] at 3.3 [GHz] and a value of 3.317 [dBi] at 5 [GHz]. After optimizing it with the CST Microwave Studio 2014 program, which can be 3D-designed, Based on these results, we investigated the performance of antennas by measuring their characteristics. In recent years, WLAN, which is a variety of wireless technologies that are continuously developing, and UWB, which is a communication technology which is increasing in frequency band due to an increase in demand of the technology users, is used for a high speed wireless communication system. Communication seems to be possible.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1916-1932
• /
• 2008

The railway accident is characterized by widespread and great(immerse) damage to our society when an accident occurred even if the probability of a railway accident is low. It is no doubt that the role of a rolling stock driver who are active in the first line of the rail safety driving is the most important to prevent an unexpected railway accident. Before new railway safety law being taken into effect, each railway operating organization had the responsibility of training a rolling stock driver by qualification criteria (the requirements or standards of competency), training period, probation period decided on their own standards. To train drivers driving same locomotive model, each railway operating organization had a variety of standards to draft and train trainees. Consequently, It was considered inefficient way to train and manage rolling stock drivers. However, after implementing the new railway safety law, a new system including training and evaluation process to issue driver's license on the condition that entire requirements are satisfied has been established. To prove the competency of the rolling stock driver objectively, training center and third-party evaluation center are divided individually and assigned by government office. Training center should design the training program to allot theatrical education time for different trainee group and to secure maximum practical training time utilizing simulator system to enhance the rolling stock driver's competency. This study analyzes certain conditions necessary to maximize the effectiveness and practical use of training for aquisition of a driver's license and the problems of the existing rail safety law and the ways to improve them.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.1
• /
• pp.153-161
• /
• 2015

In this paper, we propose a locomotor evaluation System for mouse based on continuous shooting images. In the field of veterinary medicine and animal studies are subjected to using the mouse for the quality of human life. In particular, during the experiments using the artificially created mice injury, through a variety of scoring and a lot of experiments to measure the extent of recovery from the injury. The traditional method of measuring the quantity of exercise while in this experiment was made of a method for directly observing person. The proposed system performs the continuous shooting per unit of time specified by the movement of the mouse is extracted from a continuous image shooting with the outline of a mouse point cloud. And using the extracted point cloud to extract again the inner contour of the body of the mouse. So using the new point cloud obtained its center, Then, using the center point calculated by accumulating the distance between two points on locomotor evaluation system design and implement to obtain the total distance the mouse moves over a unit of time.

• Korean Journal of Optics and Photonics
• /
• v.26 no.2
• /
• pp.88-97
• /
• 2015

An omnidirectional optical system can be described as a special optical system that images in real time a panoramic image with an azimuthal angle of $360^{\circ}$ and the altitude angle corresponding to the upper and lower fields of view from the horizon line. In this paper, for easy fabrication and compact size, we designed and fabricated a catadioptric omnidirectional optical system consisting of the mirror part of a spherical mirror with a central hole (that is, obscuration), a plane mirror, the imaging lens part of 3 single spherical lenses, and a spherical doublet in the visible light spectrum. We evaluated its image performance by measuring the cut-off spatial frequency using automobile license plates, and the vertical field of view using an ISO 12233 chart. We achieved a catadioptric omnidirectional optical system with vertical field of view from $+53^{\circ}$ to $-17^{\circ}$ and an azimuthal angle of $360^{\circ}$. This optical system cleaniy imaged letters on a car's front license plate at the object distance of 3 meters, which corresponds to a cut-off spatial frequency of 135 lp/mm.

• The Journal of Korean Institute of Information Technology
• /
• v.15 no.12
• /
• pp.157-164
• /
• 2017

Mobile ECG signal measurement is a technique to measure small signals of several mV, and many studies have been conducted to remove noise including wandering scheme. Removal of the equipotential line noise caused by shaking or movement of the electrode cable is one of the core research contents for the electrocardiogram measurement. In this study, we proposed a modified step-size of combined NLMS(normalized least squares) and DLMS(delayed least squares) adaptive filter to eliminate baseline noise from ECG signals. The proposed method mainly adjusts initial filter step-size to reduce distortion of original ECG signals characteristic after eliminating baseline noise. The modified filter step-size is scaled by filter order size and distortion minimization factor. This method is suitable for portable ECG device with a small processor and less power consumption. This technique also decreases computation time which is essential for real-time filtering. The proposed filter also increase the signal to noise ratio (SNR) compared to conventional NLMS filter.

• The Journal of Korean Institute of Information Technology
• /
• v.15 no.12
• /
• pp.181-188
• /
• 2017

As a population of leisure activities grows and diversifies, there is a great demand for portable and environment-friendly power generation systems. A small wind power generation system is emerging as a suitable power generation equipment to meet these needs. The most important thing when developing a small portable wind turbine is to reduce the weight of the generator and increase the efficiency. The existing 300W wind turbine generator weighs about 10kg, which is heavy to carry. Therefore, a new generator weighing less than 4kg to make it easy to carry with high efficiency has been developed. In addition, considering complicated characteristics of wind volume and topography of Korea, a small wind turbine that can be used in urban and rural areas individually was constructed. Through basic designing and optimization, the lightweight and efficient generator was manufactured. It is a 300W wind turbine designed and fabricated with reduced weight as a prototype. The average output voltage of the generator was 24.7V at 900rpm no-load test. On a load test with the average line voltage 36.8V and the average phase current 2.62A, when the mechanical input was 339.84W, an average voltage output of the generator was measured as 289.5W with efficiency of 85.18%. The generator weight was 3.84kg.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.6
• /
• pp.25-32
• /
• 2021

In this study, it proposes a mode converter that is relatively easy to implement and can shorten the transmission line length of the final combining port and it was fabricated and tested by applying it to an 8-way spatial combiner. The proposed mode converter converts the signal converted from the doorknob-shaped circular disk connected to the ground into the TM₀₁ mode by opening it in the circular waveguide. The 8-way waveguide spatial combiner is designed and implemented so that 8 signals input from the H-plane are combined in a circular waveguide at the center, and the final combining mode is TM₀₁. The test results confirmed excellent performance with an insertion loss of less than 0.4dB and a combining efficiency of 95% or more. In addition, it was confirmed that it is suitable for high output by calculating the breakdown voltage and discharge threshold power of the new mode conversion structure through electric field analysis. The results confirmed through this study are expected to be applicable to high-power, high-efficiency SSPA in various fields in the future.

• Composites Research
• /
• v.34 no.5
• /
• pp.290-295
• /
• 2021

The application of lightweight structural composites to automobiles as a solution in line with global fuel economy regulations to curb global warming is recognized as a megatrend. This study was conducted to provide a technical approach that can respond to the issue of replacing parts that require conductive properties to maximize the application of thermoplastic carbon fiber reinforced plastics (CFRPs), which are advantageous in terms of repair, disposal and recycling. By utilizing the properties of the low-viscosity polymerizable oligomer matrix, it was possible to prepare a thermoplastic CFRP exhibiting excellent impregnation properties while uniformly mixing the conductive filler. Various carbon-based conductive fillers such as carbon black, carbon nanotubes, graphene nanoplatelets, graphite, and pitch-based carbon fibers were filled up to the maximum content, and electrical and thermal conductive properties of the fabricated composites were compared and studied. It was confirmed that the maximum incorporation of filler was the most important factor to control the conductive properties of the composites rather than the type or shape of the conductive carbon filler. Experimental results were observed in which it might be advantageous to apply a one-dimensional conductive carbon filler to improve electrical conductivity, whereas it might be advantageous to apply a two-dimensional conductive carbon filler to improve thermal conductivity. The results of this study can provide potential insight into the optimization of structural design for controlling the conductive properties of thermoplastic CFRPs.

• Journal of Korea Trade
• /
• v.23 no.3
• /
• pp.68-83
• /
• 2019

Purpose - The UNCITRAL Model Law on Electronic Transferable Records (Model Law) is based on the principles of non-discrimination against the use of electronic means, functional equivalence, and technology neutrality underpinning all UNCITRAL texts on electronic commerce. Investigating the disagreements between the Model Law and the Koran Commercial Act (KC Act), including the B/L Regulation, and suggesting the revision of the KC Act including the B/L Regulation, could be a valuable study. The purpose of this paper is to contribute to the harmonization of Korean legislation regarding electronic bill of lading in compliance with the Model Law. Design/methodology - The Model Law is flexible to accommodate the use of all technologies and models, such as registries, tokens, and distributed ledgers: that is, blockchain. In 2007, the KC Act was revised to regulate electronic bills of lading to promote the widespread legal use of electronic bills of lading. In addition, The Regulation on Implementation of the Provisions of the Commercial Act Regarding Electronic Bills of Lading (the B/L Regulation) was enacted to regulate the detailed procedures in using electronic bills of lading in 2008. This paper employs a legal analysis by which this paper does find differences between two rules in light of technology neutrality and global standard of electronic bills of lading model. Findings - The main findings are as follows: i) the Korean registry agency has characteristics of a closed system. ii) The KC Act has no provision regarding control. iii) The KC Act discriminates other electronic bills of lading on the ground that it was issued or used abroad. Moreover, this study does comprehensive analysis of Korean Acts in comparison with the Model Law and, in particular, this study analyzes the differences between the KC Act and the Model Law by comparing article by article in view of the harmonization of the two rules. Originality/value - The subject of previous several studies was draft provisions on Electronic Transferable Records before completion of the Model Law; thus, these studies did not take into consideration the character of the Model Law as the Model Law was chosen at the final stage of legislation. This study is aimed at the final version of the Model Law. So, this study is meaningful by finding the suggestion and directions for the Korean government to revise the KC Act and the B/L Regulation in line with the Model Law.

• Korean Journal of Psychosomatic Medicine
• /
• v.26 no.2
• /
• pp.112-118
• /
• 2018

Objectives : Delirium is one of the most common mental illnesses that can affect cognitive function. Melatonin has been shown to be effective in the treatment of insomnia, and recent studies have shown a protective effect to prevent delirium. This study was conducted to investigate the efficacy of melatonin in delirium patients. Methods : All patients were referred to psychiatric department for insomnia and symptoms of delirium, and were diagnosed delirium by the DSM-5 diagnostic criteria. We compared base line severity of delirium with K-DRS-R-98-R (Korean version of Delirium Rating Scale revised 98) and after taking 2mg of melatonin, retrospectively. The side effects were also identified by referring to the medical records. Results : A total 21 patients had taken melatonin for insomnia and delirious symptoms. The K-DRS-R-98 scores were decreased from $15.24{\pm}2.64$ before treatment to $6.57{\pm}5.42$ after treatment. And CGI-S scores were also decreased from $4.14{\pm}0.48$ before treatment to $2.81{\pm}0.93$ after treatment (p<0.05). Conclusions : This study illustrates the possibility of melatonin as an effective treatment option for delirious symptoms such as disorientation, motor agitation, lability of affect and hallucinations as well as insomnia, with less concerns of drug side effect. Further study with a larger sample and prospective design will be required to confirm these results.