• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.7
• /
• pp.687-694
• /
• 2006

We report on the fabrication of organic-based flexible displays using an amorphous IZO anode grown at room temperature. The IZO anode films were grown by a conventional DC reactive sputtering on the polycarbonate (PC) substrate at room temperature using a synthesized IZO target in a $Ar/O_2$ ambient. Both x-ray diffraction (XRD) and high resolution electron microscope (HREM) examination results show that the IZO anode film grown at room temperature Is complete amorphous structure due to low substrate temperature. A sheet resistance of $35.6\Omega/\Box$, average transmittance above 90 % in visible range, and root mean spare roughness of $6\sim10.5\AA$ were obtained even in the IZO anode film grown on PC substrate at room temperature. It is shown that the $Ir(ppy)_3$ doped flexible organic light emitting diode (OLED) fabricated on the IZO anode exhibit comparable current-voltage-luminance characteristics as well as external quantum efficiency and power efficiency to OLED fabricated on conventional ITO/Glass substrate. These findings indicate that the IZO anode film grown on PC substrate is a promising anode materials for the fabrication of organic based flexible displays.

• Proceedings of the KIEE Conference
• /
• 2008.04c
• /
• pp.125-127
• /
• 2008

기존의 LED(Light Emitting Diode)를 이용한 LCD(Liquid Crystal Display) 백라이트 유닛은 LED에 과전류가 흐르면 소자의 파손이 발생하고 무부하시 불필요한 전력소모가 발생하는 경우가 있어 보호회로가 필요하였다. 그래서 본 논문은 보호회로를 이용한 LCD 백라이트 유닛용의 LED 구동회로를 제안한다. 제안된 보호회로는 2가지로 첫 번째 보호회로는 무부하시 소비전력을 줄이는 보호회로 이다. 시뮬레이션 결과 무부하시 피드백 제어부 IC(Integrated Circuit)의 전원전압 $V_{cc}$를 UVLO(Under Voltage Lock Out)전압 이하로 강하시켰다. 그래서 무부하시 소비되는 전력을 줄일 수 있었다. 두번째 보호회로는 과전류시 보호회로 이다. 시뮬레이션 결과 과전류시 SCR이 온 되어 피드백 제어부 IC의 전원전압 $V_{cc}$를 UVLO전압 이하로 강하시켰다. 따라서 과전류시 LED 동회로 소자의 파손을 방지할 수 있는 장점이 있다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.8
• /
• pp.1078-1084
• /
• 2011

In this paper, a temperature control for LED(Light Emitting Diode) lamp using a cooling fan is studied. An efficient temperature control scheme for the LED lamp using the fan wind at the lowest sound noise is studied. Also, for minimization study of sound noise and temperature control of an LED lamp, a sequential control algorithm using the cooling fan at the lowest sound noise is presented. For the study, after measurement of the minimum sound noise of the fan and related temperature of the LED lamp through tests, experiments on temperature control of the LED lamp using the fan was performed.

• Journal of Korean Society on Water Environment
• /
• v.29 no.2
• /
• pp.270-275
• /
• 2013

The aim of this study was to investigate the efficiency of thickness of optical panel (OP) on the growth rate of Chlorella vulgaris. The size of Chlorella vulgaris (FC-16) was $3-8{\mu}m$, having round in shape. The cells of Chlorella vulgaris was cultured in the Jaworski's Medium with deionized water at $22^{\circ}C$ for 15 days. For this experiment, three OP samples were prepared to evaluate the efficiency of thickness of OP on the growth rate of Chlorella vulgaris; 4 mm OP with LED (Light Emitting Diode) (Run 1), 6 mm OP with LED (Run 2) and 8 mm with LED (Run 3). The diffuse rate was reached 86%, 91% and 92% for Run 1, Run 2 and Run 3, respectively. Average biomass of Run 2 and Run 3 were measured 11.18% higher than that of Run 1. However, the specific growth rate for all fractions were almost same. In addition, chlorophyll content per cell and cell volume were found to be slice difference between Run 2 and Run 3. Therefore, Run 2 has more effect on growth rate of biomass for Chlorella vulgaris than Run 1 and Run 3.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1491-1492
• /
• 2011

In this study, we investigated about the effect of hole transport layer materials(${\alpha}$-NPD, TPD) depending on the electrical properties of organic light emitting diode. In deposition method, we used thermal evaporation and it was a method for performing thin film by attaching vaporizing a molecule to substrate in a high thermal and vaccum. We analyzed luminance, current density, external quantum efficiency and current efficiency in 40 [nm] as optimization thickness of ${\alpha}$-NPD and TPD. In result of experiment, maximum luminance of TPD had 1.1 times higher than ${\alpha}$-NPD, but ${\alpha}$-NPD had luminance, external quantum efficiency, and current efficiency higher than TPD in low operating voltage. Actually, ${\alpha}$-NPD had efficiency higher than TPD in low operating voltage.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.2
• /
• pp.122-129
• /
• 2015

In this study, we propose a low voltage stress and cost-effective light emitting diode (LED) driver capable of multi-channel current balancing. Conventional LED drivers require as many boost converters as the number of LED channels, whereas the proposed LED driver requires only one buck converter and several balancing capacitors instead of several expensive boost converters. Additionally, while the components of the boost converter have high voltage stress and depend on the LED driving voltage, components of the proposed driver have about one-half of the voltage stress across all components. The proposed driver exhibits high reliability and cost effectiveness because it only uses few DC blocking capacitors with no additional active devices to balance the current of multi-channel LEDs. The proposed driver exhibits high reliability and cost effectiveness. The validity of the proposed driver is confirmed through a theoretical analysis. An explanation of the design considerations and experimental results were obtained using a prototype applicable to a 46" LED-TV.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.4
• /
• pp.285-291
• /
• 2016

A light-emitting diode (LED) has been increasingly applied to various industrial fields and general lightings because of its high efficiency, low power consumption, environment-friendly characteristic and long lifetime. To drive the LED lighting, a power converter with the constant output current is needed. Among many power converters, the flyback converter is chosen by many converter designers due to high power density, structural simplicity, and miniaturization. In this converter, an electrolytic capacitor is generally chosen for the stabilization of the DC voltage because of having the large capacitance and the low price. However, the disadvantages are the short expected life time and 120Hz ripple currents on the converter output node. In this paper, a single-stage dimmable PFC DCM flyback converter without the electrolytic capacitor is proposed to prolong the lifetime of the LED driver. For the long lifetime of the converter, the polyester film capacitor with the small capacitance is substituted for the electrolytic capacitor on the output node and an LC resonant filter is added to damp 120Hz ripple current. The proposed converter is verified through the simulation and the experimental works.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.5
• /
• pp.467-472
• /
• 2011

The heat transfer over a radial heat sink, adapted for LED (light emitting diode) downlights, was experimentally and analytically investigated. We added radiation heat transfer into a previous calculation that neglected this factor. The numerical results agreed well with experimental results. Parametric studies were performed to compare the effects of the geometric parameters (fin length, fin height, ideal number of fins) and the operating parameter (heat flux) on the average heat-sink temperature from the heat-sink array. We found the fin length that maximizes the heattransfer performance. As the emissivity increased, the effect of geometric parameters on the radiation heat transfer decreased.

• Rapid Communication in Photoscience
• /
• v.1 no.1
• /
• pp.19-20
• /
• 2012

Novel star-shaped imide compounds containing electron-donating triphenylamine and/or electron-withdrawing bis(trifluoromethyl)phenyl side groups were synthesized via a two-step process. First, 3,6-dibromo-benzene-1,2,4,5-tetracarboxylic acid (2B4BA) was reacted with 4-aminophenyl (diphenylamine) (ATPA) or 3,5-bis(trifluoromethyl)aniline (6FA) by imide reaction. Then, Suzuki coupling reaction was carried out on these compounds with 4-(N,N-diphenylamino)-1-phenyl boronic acid (BTPA) or 3,5-bis(trifluoromethyl)phenyl boronic acid (6FBB), resulting in 3,6-bis[4-(diphenylamino)phenyl]-N,N'-bis[4-(diphenylamino) phenyl]-pyromellitimide (TPTPPI), 3,6-bis[3,5-bis(trifluoro methyl) phenyl]-N,N'-bis[3,5-bis(trifluoromethyl) phenyl]-pyro mellitimide (6F6FPI) or 3,6-bis[4-(diphenylamino)phenyl]-N,N'-bis[3,5-bistrifluoromethyl)phenyl]-pyromellitimide (6FTPPI). The imide compounds obtained were characterized by NMR, FT-IR, DSC, TGA, melting point analyzer, EA, and solubility measurements. In addition, their optical and electrical properties were evaluated by fluorescence spectroscopy, UV-vis spectroscopy, and cyclic voltammetry (CV). 6F6FPI exhibited deep blue emission (443 nm), along with high $T_m$ ($382^{\circ}C$) and relatively high $T_g$ ($148^{\circ}C$).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.500-500
• /
• 2013

특정한 유기 물질에 전류를 인가했을 때 발광을 하는 특성을 이용한 Organic Light Emitting Diode (OLED)는 뛰어난 색재현성, 적은 전력소모, 간단한 제조공정, 넓은 시야각 등으로 인해 PDP, LCD, LED에 이은 차세대 디스플레이 소자로 많은 관심을 받고 있다. 하지만 OLED는 각기 다른 굴절률을 가지는 다층구조로 되어있어 실질적으로 소자 밖으로 나오는 빛은 원래 생성된 빛의 20% 정도 밖에 되지 않는다. 이러한 광 손실을 줄이기 위해 Photonic Crystal (PC)이나 마이크로 렌즈 어레이(MLA) 부착 등과 같이 특정한 크기를 갖는 주기적인 나노 구조물을 이용한 광추출 효율 상승 방법은 특정 파장의 빛에서만 효과가 있는 한계가 있었으며 고가의 공정과정을 거쳐야 했으므로 OLED 소자의 가격 향상에 일조하였다. 이의 해결을 위해 본 연구는 유리기판 위에 랜덤한 분포를 가지는 나노 구조물 제작 공정법을 제안한다. 먼저 유리기판 위에 스퍼터로 금속 박막을 입혀 이를 Rapid thermal annealing (RTA) 공정을 이용하여 랜덤한 분포의 Island를 가지는 마스크를 제작하였다. 그 후 플라즈마 식각을 이용하여 유리기판에 나노 구조물을 형성하였고 기판 위에 남아있는 마스크는 Ultrasonic cleaning을 이용하여 제거하였다. 제작된나노구조물은 200~300 nm의 높이와 약 200 nm 폭을 가지고 있다. 제작된 유리기판의 OLED 소자로의 적용가능성을 알아보기 위한 광학특성 조사결과는 300~900 nm의 파장영역에서 맨유리와 거의 비슷한 수직 투과율을 보이면서 최대 50%정도의 Diffusion 비율을 나타내고 있고 임계각(41도) 이상의각도에서 인가된 빛의 투과율에 대해서도 향상된 결과를 보여주고 있다. 제안된 공정의 전체과정 기존의 PC, MLA 등의 공정에 비해 난이도가 쉽고 저가로 진행이 가능하며 추후 OLED 소자에 적용될 시 대량생산에 적합한 후보로 보고 있다.