• Transactions on Electrical and Electronic Materials
• /
• 제15권5호
• /
• pp.245-248
• /
• 2014

$Pt/Al_2O_3/Si_3N_4/SiO_2/Si$ charge trap flash memory structures with various thicknesses of the $Si_3N_4$ charge trapping layer were fabricated. According to the calculated and measured results, we depicted electron loss in a schematic diagram that illustrates how the trap to band tunneling and thermal excitation affects electrons loss behavior with the change of $Si_3N_4$ thickness, temperature and trap energy levels. As a result, we deduce that $Si_3N_4$ thicknesses of more than 6 or less than 4.3 nm give no contribution to improving memory performance.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1985년도 학술발표회 논문집
• /
• pp.43-46
• /
• 1985

In this paper, the SAW Comb filter which consists of 1 apodized IDT, 2 uniform IDTs, and the grating reflector is studied. The apodized IDT is designed by utilizing the Chebyshev window function, and the output IDTs are arrayed with 0.5$\mu$sec time delay to obtain the Comb characteristics. And also the frequency response below the first peak is sufficiently suppressed by the grating reflector which is constituted 180 electrodes. In experiment the SAW Comb filter is fablicated by depositing Al on the surface of YZ-LiNbO3 substrate. As the experimental result, the frequency characteristics of the SAW Comb filter are consistent with theoretical values in admitted errors.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.391-394
• /
• 2006

Studied that the relationship between the charge density of PAC and its alkalinity, as well as the influences of PAC in paper sizing. Study results showed that PAC with higher charge density brought higher sizing degree when the same amount of $Al_{2}O_{3}$ content was dosed. However, there was no direct relationship between PAC charge density and its alkalinity, and higher PAC alkalinity can't improve its charge density. It was also found that the admixture (PPAC) of polyamine and PAC had higher charge density than PAC. The effects of PPAC on DRS and RAKD sizing were better than PAC sizing, when dosage and other sizing condition were the same.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권9호
• /
• pp.4548-4559
• /
• 2018

Conditional differential attack against NFSR-based cryptosystems proposed by Knellwolf et al. in Asiacrypt 2010 has been widely used for analyzing round-reduced Grain v1. In this paper, we present improved conditional differential attacks on Grain v1 based on a factorization simplification method, which makes it possible to obtain the expressions of internal states in more rounds and analyze the expressions more precisely. Following a condition-imposing strategy that saves more IV bits, Sarkar's distinguishing attack on Grain v1 of 106 rounds is improved to a key recovery attack. Moreover, we show new distinguishing attack and key recovery attack on Grain v1 of 107 rounds with lower complexity O($2^{34}$) and appreciable theoretical success probability 93.7%. Most importantly, our attacks can practically recover key expressions with higher success probability than theoretical results.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2006년도 추계학술발표논문집
• /
• pp.133-134
• /
• 2006

본 논문에서는 ITO/Glass 기판에 스핀 코팅법(Spin Coating)과 열 증착법(Thermal Evaporation)을 이용하여 ITO/PEDOT:PSS/PVK/PFO-poss/Li/Al 구조를 갖는 청색 고분자 유기전계발광소자를 제작하였다. 청색 고분자 유기발광다이오드 제작시 ITO 전극을 $O_2$ gas를 이용한 Plasma Treatment와 Heat Treatment를 실시하여 기판처리가 제작된 소자의 전기, 광학적 특성에 미치는 영향에 대하여 조사하였다. Plasma와 Heat Treatment를 동시에 처리한 소자에서 가장 우수한 전기, 광학적 특성을 나타냈으며, 기판처리를 하지 않은 경우는 전기, 광학적 특성은 크게 감소하였다.

• 전기화학회지
• /
• 제25권3호
• /
• pp.105-112
• /
• 2022

전고체전지의 상용화를 위해서는 상온에서 작동이 가능한 고체전해질 개발이 필수적이며 이온전도도가 높은 물질을 채택하여 전고체전지를 제조해야 한다. 따라서, 기존의 옥사이드 계열의 고체의 이온전도도를 높이기 위하여 이종원소가 도핑된 Li₇La₃Zr₂O₁₂ (LLZO)를 필러소재(Al, Nb-LLZO)로 사용하였으며, 상온에서 작동이 가능하도록 Poly(ethylene oxide)/Poly(propylene carbonate) (PEO/PPC) 기반의 가넷형 무기계 고체고분자 전해질을 제조하였다. 이원금속 원소를 도핑한 가넷형 무기계 필러와 PEO/PPC (1:1 비율로 섞인) 고분자를 1:2.4의 비율로 균일하게 교반하여 전해질을 합성해 상온과 60 ℃에서 전고체 전지의 전기학적 성능을 분석하였다. 제조한 복합 전해질은 이원금속의 도핑으로 인하여 이온전도도가 향상되었으며, PEO 단독으로 사용하는 전해질보다 PPC를 1:1로 첨가하였을 때 이온전도도 향상을 도와 60 ℃ 뿐만 아니라 상온에서 전고체 전지의 용량과 용량 유지율이 개선되었음을 확인하였다.

• 자원환경지질
• /
• 제39권6호
• /
• pp.675-687
• /
• 2006

이 연구에서는 청풍지역 하상퇴적물에 대한 지구화학적 특성 규명을 통해, 주성분원소 및 미량원소에 대한 청풍지역의 자연배경치를 제시하고, 지구화학적 재해에 대해 예견하고자 한다. 이를 위해 물이 흐르고 있는 1차 수계를 대상으로 하상퇴적물시료를 채취하였고, 실험실에서 자연건조 시켰으며, 화학적 분석을 위해 알루미나 몰타르를 이용하여 200메쉬 이하로 분쇄하였다. 주성분원소 및 미량성분원소는 XRD, XRF, ICP-AES, NAA를 이용하여 분석하였다. 청풍지역 하상퇴적물의 기반암에 따른 지질집단별 지구화학적 특성 비교를 위해, 화강암질편마암지역, 메타텍틱편마암지역, 다도응회암지역, 유치역암 지역, 능주용암지역으로 분류하였다. 청풍지역 하상퇴적물 전체에 대한 주성분원소 함량은 $SiO_2\;47.31{\sim}72.81\;wt.%,\;Al_2O_3 \;11.26{\sim}21.88\;wt.%,\;Fe_2O_3\;2.83{\sim}8.39\;wt.%,\;CaO\;0.34{\sim}7.54\;wt.%,\;MgO\; 0.55{\sim}3.59\;wt.%,\;K_2O\;1.71{\sim}4.31\;wt.%,\;Na_2O\;0.56{\sim}2.28\;wt.%,\;TiO_2\;0.46{\sim}1.24\;wt.%,\;MnO\;0.04{\sim}0.27\;wt.%,\;P_2O_5\;0.02{\sim}0.45\;wt.%$이다. 청풍지역 하상퇴적물 전체에 대한 미량성분원소 및 희토류원소 함량은 $Ba\;700ppm{\sim}8990ppm,\;Be\;1.0{\sim}3.50ppm,\;Cu\;6.20{\sim}60ppm,\;Nb\;12{\sim}28ppm,\;Ni\;4.4{\sim}61ppm,\;Pb\;13{\sim}34ppm,\;Sr\;65{\sim}787ppm,\;V\;4{\sim}98ppm,\;Zr\;32{\sim}164ppm,\;Li\;21{\sim}827ppm,\;Co\;3.68{\sim}65ppm,\;Cr\;16.7{\sim}409ppm,\;Cs\;72{\sim}37.1ppm,\;Hf\;4.99{\sim}49.2ppm,\;Rb\;71.9{\sim}649ppm,\;Sb\;0.16{\sim}5.03ppm,\;Sc\;4.97{\sim}5ppm,\;Zn\;26.3{\sim}375ppm,\;Ce\;60.6{\sim}373ppm,\;Eu\;0.82{\sim}6ppm,\;Yb\;0.71{\sim}10ppm$의 범위를 보였다.

• 한국진공학회지
• /
• 제19권3호
• /
• pp.184-189
• /
• 2010

두 가지의 형광도판트를 이용하여 제작된 단일 발광층 유기발광다이오드(OLEDs)는 ITO / NPB ($700{\AA}$) / MADN : C545T - 1.0% : DCJTB - 0.3% ($300{\AA}$) / Bphen ($300{\AA}$>) / LiF ($10{\AA}$) / Al ($1,000{\AA}$)으로 구성되었다. C545T와 DCJTB는 각각 녹색과 적색 도판트로 사용되었고, 호스트 물질인 MADN에 대해서 각각 다른 농도로 도핑하였다. 이러한 두 가지 형광도 판트를 사용한 제적화된 OLED는 8.42 cd/A의 효율과 6 V에서 $3169 cd/m^2$의 발광 휘도와 (0.43, 0.50)의 색좌표를 가졌다. 이러한 OLED 구조의 electroluminescence는 각각 C545T와 DCJTB에 따라 500 nm와 564 nm의 피크를 가졌다. 이러한 결과는 MADN에서 C545T로 C545T에서 DCJTB로 포스터 에너지 전이가 일어났음을 설명할 수 있다.

• Transactions on Electrical and Electronic Materials
• /
• 제10권6호
• /
• pp.203-207
• /
• 2009

We have investigated the effect of ambient gases on the structural, electrical, and optical characteristics of ITO thin films intended for use as anode contacts in OLED (organic light emitting diodes) devices. These ITO thin films are deposited by radio frequency (RF) magnetron sputtering under different ambient gases (Ar, Ar+$O_2$, and Ar+$H_2$) at $300{^{\circ}C}$. In order to investigate the influences of the oxygen and hydrogen, the flow rate of oxygen and hydrogen in argon mixing gas has been changed from 0.5 sccm to 5 sccm and from 0.01 sccm to 0.25 sccm, respectively. The intensity of the (400) peak in the ITO thin films increased with increasing $O_2$, flow rate whilst the (400) peak was nearly invisible in an atmosphere of Ar+$H_2$. The electrical resistivity of the ITO thin films increased with increasing $O_2$ flow rate, whereas the electrical resistivity decreased sharply under an Ar+$H_2$ atmosphere and was nearly similar regardless of the $H_2$ flow rate. The change of electrical resistivity with changes in the ambient gas composition was mainly interpreted in terms of the charge carrier mobility rather than the charge carrier concentration. All the films showed an average transmittance of over 80% in the visible range. The OLED device was fabricated with different ITO substrates made with the configuration of ITO/$\alpha$-NPD/DPVB/$Alq_3$/LiF/Al in order to elucidate the performance of the ITO substrate. Current density and luminance of OLED devices with ITO thin films deposited in Ar+$H_2$ ambient gas is the highest among all the ITO thin films.

• 반도체디스플레이기술학회지
• /
• 제9권3호
• /
• pp.53-58
• /
• 2010

In this study, we have investigated the effect of the ambient gases on the characteristics of IZO thin films for the OLED (organic light emitting diodes) devices. For this purpose, IZO thin films were deposited by RF magnetron sputtering under various ambient gases (Ar, $Ar+O_2$ and $Ar+H_2$) at $150^{\circ}C$. In order to investigate the influences of the oxygen and hydrogen, the flow rate of oxygen and hydrogen in argon mixing gas has been changed from 0.1sccm to 0.5sccm, respectively. All the samples show amorphous structure regardless of ambient gases. The electrical resistivity of IZO film increased with increasing flow rate of $O_2$ under $Ar+O_2$ while under $Ar+H_2$ atmosphere the electrical resistivity showed minimum value near 0.5sccm of $H_2$. All the films showed the average transmittance over 85% in the visible range. The OLED device was fabricated with different IZO substrates made by configuration of IZO/${\alpha}$-NPD/DPVB/$Alq_3$/LiF/Al to elucidate the performance of IZO substrate. OLED devices with the amorphous-IZO (a-IZO) anode film show better current densityvoltage-luminance characteristics than that of OLED devices with the commercial crystalline-ITO (c-ITO) anode film. It can be explained that very flat surface roughness and high work function of a-IZO anode film lead to more efficient hole injection by reduction of interface barrier height between anode and organic layers. This suggests that a-IZO film is a promising anode materials substituting conventional c-ITO anode in OLED devices.