Browse > Article

Structural and electrical characteristics of IZO thin films deposited under different ambient gases  

Lee, Yu-Lim (Dept. of Materials Engineering, Korea University of Technology and Education)
Lee, Kyu-Mann (Dept. of Materials Engineering, Korea University of Technology and Education)
Publication Information
Journal of the Semiconductor & Display Technology / v.9, no.3, 2010 , pp. 53-58 More about this Journal
Abstract
In this study, we have investigated the effect of the ambient gases on the characteristics of IZO thin films for the OLED (organic light emitting diodes) devices. For this purpose, IZO thin films were deposited by RF magnetron sputtering under various ambient gases (Ar, $Ar+O_2$ and $Ar+H_2$) at $150^{\circ}C$. In order to investigate the influences of the oxygen and hydrogen, the flow rate of oxygen and hydrogen in argon mixing gas has been changed from 0.1sccm to 0.5sccm, respectively. All the samples show amorphous structure regardless of ambient gases. The electrical resistivity of IZO film increased with increasing flow rate of $O_2$ under $Ar+O_2$ while under $Ar+H_2$ atmosphere the electrical resistivity showed minimum value near 0.5sccm of $H_2$. All the films showed the average transmittance over 85% in the visible range. The OLED device was fabricated with different IZO substrates made by configuration of IZO/${\alpha}$-NPD/DPVB/$Alq_3$/LiF/Al to elucidate the performance of IZO substrate. OLED devices with the amorphous-IZO (a-IZO) anode film show better current densityvoltage-luminance characteristics than that of OLED devices with the commercial crystalline-ITO (c-ITO) anode film. It can be explained that very flat surface roughness and high work function of a-IZO anode film lead to more efficient hole injection by reduction of interface barrier height between anode and organic layers. This suggests that a-IZO film is a promising anode materials substituting conventional c-ITO anode in OLED devices.
Keywords
IZO thin film; OLED; RF-magnetron sputtering;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 K. H. Noh, M. K. Choi, S. H. Park, and H. R, Joo, "Amorphous Transparent Conducting film $In_{2}O_{3}$:Zn", Hankook Kwanghan Hoeji, 13, pp.455 (2002).   DOI   ScienceOn
2 C. Nunes de Carvalho, A. M. Botelho do Rego, A. Amaral, P. Brogueira and G. Lavareda, "Effect of substrate temperature on the surface structure, composition and morphology of indium-tin oxide films", Surface and Coatings Technology, 124, 70 (2000).   DOI   ScienceOn
3 J. J. Ho and C. Y. Chen, J. Electrochem. Soc., "Polymer light-emitting diodes with amorphous indium-zinc oxide anodes deposited at room temperature", 152, pp.57(2005).   DOI   ScienceOn
4 Y. S. Jung, J. Y. Seo, D. K. Lee and D. Y. Jeon, "Influence of DC magnetron sputtering parameters on the properties of amorphous indium zinc oxide thin film", Thin Solid Films, 445, pp. 63(2003).   DOI   ScienceOn
5 J.-H. Bea, J.-M. Moon, and H.-K. Kim, "Electrical, Optical and Structural Properties of Indium Zinc Oxide Top Cathode Grown by Box Cathode Sputtering for Top-emitting OLEDs", The Journal of the Korean Institute of Electrical and Electronic Material Engineers, 19, pp.442(2006).   과학기술학회마을   DOI   ScienceOn
6 K. Ishibashi, K. Hirata, and N. Hosokawa, "Mass Mass spectrometric ion analysis in the sputtering of oxide targets", Journal of Vacuum Science & Technology A., 10, pp.1718 (1992).   DOI
7 K. Tominaga, T. Ueda, T. Ao, M. Kataoka, and I. Mori, "ITO films prepared by facing target sputtering system", Thin Solid Films, 281-282, pp. 194 (1996).   DOI   ScienceOn
8 Y. Hoshi, H. Kato, and K. Funatsu, Thin Solid Films, "ITO films deposited by facing target sputtering", 445, pp. 245 (2003).   DOI   ScienceOn
9 D. C. Paine, B. Yaglioglu, "Amorphous IZO-based transparent thin film transistors", ScienceDirect, 516, pp.5894-5898 (2007)
10 N. Taga, M. Maekawa, Y. Shigesato, I. Yasui, M. Kamei and T. E. Haynes, "Deposition of Heteroepitaxial $In_{2}O_{3}$ Thin Films by Molecular Beam Epitaxy", Jpn. J. Appl.Phys. 37,pp.6524(1998)   DOI
11 H.-K. Kim, D.-G. Kim, K.-S. Lee, M. S. Huh, S. H. Jeong, and K. I. Kim, "The Application of Anode Material (ITAZO) and Hole Transportation Material (NiO) in Organic Solar Cell", Appl. Phys. Lett, 86, p.183503 (2005).   DOI   ScienceOn
12 K. Zhang, F. Zhu, C.H.A Huan, A.T.S. Wee, "Optimized indium tin oxide contact for organic light emitting diode applications ", J. Appl. Phys., 86, pp. 974 (1999).   DOI