• Journal of Dairy Science and Biotechnology
• /
• v.32 no.2
• /
• pp.111-119
• /
• 2014

This study was carried out to investigate the quality characteristics and antioxidant activity of a functional drink prepared by mixed fermentation of oak mushroom extract and whey. As the ratio of oak mushroom extract increased, the pH value of the whey fermentative solution decreased proportionally, and the titratable acidity increased significantly. The number of lactic acid bacteria after 24 hours of culture was at a level of $10^{11}CFU/mL$ in all whey fermentative solutions containing oak mushroom extracts. DPPH and ABTS radical scavenging activities after 24 hours of culture were higher in a fermentative solution containing oak mushroom extract than in the control. After 24 hours of culture, the nitric oxide production in whey fermentation solution by LPS-induced RAW 264.7 cells was lower compared to that in whey fermentation solution with oak mushroom. Sensory evaluation revealed that, color, flavor, taste, and overall acceptability of the whey fermentation solution sample, which contained 1.0% oak mushroom extract, were much better than those of the other groups. Sensory evaluation of a whey drink containing oak mushroom flavor indicated that the whey drink containing 0.001% oak mushroom flavor was better than the other samples.

• The Korean Journal of Pesticide Science
• /
• v.19 no.1
• /
• pp.5-13
• /
• 2015

A chromatographic method for the determination of imazapyr, a non-selective herbicide, in agricultural commodities was developed to use safety control of pesticide residue on crops, and was fully validated as an official method for residue analysis. Agricultural commodities, mandarin (fruit), hulled rice (cereal grains), pepper (vegetables), potato (potatoes) and soybean (beans) were extracted with methanol and partitioned with dichloromethane to remove the interference obtained from sample extracts, adjusting pH to 2.5 by 4N hydrochloric acid. Finally, they were analyzed by high performance liquid chromatography coupled to UV detector (HPLC-UVD). The developed method had the linearity in the range of test concentrations with coefficients of determination ($r^2$) more than 0.99. Recovery studies were carried out at three concentration levels (LOQ, 10LOQ, and 50LOQ) performing five replicates at each level. Recoveries were ranged between 72.1 to 108.0%, with relative standard deviations less than 10%. A consistent recovery was determined according to the CODEX guidelines (CAC/GL40, 2003). Finally, LC/MS with selected ion monitoring was also applied to confirm the suspected residues of imazapyr in agricultural samples. This developed method for determination of imazapyr residues in agricultural commodities. can be used as an official method.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.2
• /
• pp.183-193
• /
• 2018

Currently, the Korea Atomic Energy Research Institute (KAERI) is planning to build the Ki-Jang Research Reactor (KJRR) in Ki-Jang, Busan. It is important to safely dispose of low-level radioactive waste from the operation of the reactor. The most efficient way to treat radioactive waste is cement solidification. For a radioactive waste disposal facility, cement solidification is performed based on specific waste acceptance criteria such as compressive strength, free-standing water, immersion and leaching tests. Above all, the leaching test is important to final disposal. The leakage of radioactive waste such as $^{137}Cs$ causes not only regional problems but also serious global ones. The cement solidification method is simple, and cheaper than other solidification methods, but has a lower leaching resistance. Thus, this study was focused on the development of cement solidification for an enhancement of cesium leaching resistance. We used Zeolite and Loess to improve the cesium leaching resistance of KJRR cement solidification containing simulated KJRR liquid waste. Based on an SEM-EDS spectrum analysis, we confirmed that Zeolite and Loess successfully isolated KJRR cement solidification. A leaching test was carried out according to the ANS 16.1 test method. The ANS 16.1 test is performed to analyze cesium ion concentration in leachate of KJRR cement for 90 days. Thus, a leaching test was carried out using simulated KJRR liquid waste containing $3000mg{\cdot}L^{-1}$ of cesium for 90 days. KJRR cement solidification with Zeolite and Loess led to cesium leaching resistance values that were 27.90% and 21.08% higher than the control values. In addition, in several tests such as free-standing water, compressive strength, immersion, and leaching tests, all KJRR cement solidification met the waste acceptance or satisfied the waste acceptance criteria for final disposal.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.7 no.1
• /
• pp.20-27
• /
• 2014

Purpose: The purpose of this study was to evaluate coracohumeral distance (CHD) in patients with or without subcoracoid impingement with hypothesis that patients with subcoracoid impingement would have narrower CHD. Materials and Methods: One hundred twenty-four patients with subacromial impingement were evaluated. The subjects with subcoracoid impingement which was affirmed clinically and confirmed by ultrasound guided subcoracoid injection (n=28) was compared with patients with subacromial impingement only (n=96). Patients with stiffness and rotator cuff tear were excluded. Absolute CHD was measured on magnetic resonance imaging (MRI) axial images and on ultrasound with the humerus in neutral position and internal rotation. Also relative ratio of distance difference (RRDD) defined as the difference of CHD in neutral position and internal rotation compared with absolute CHD in neutral on ultrasound was also measured. Results: The distance measured in neutral position was similar between US imaging and MRI (p>0.05) and both measurements did not have significant difference between the two groups (p>0.05). On ultrasound, the difference in CHD in internal rotation between the two groups nearly met the level of significance (p=0.07). No significant difference of CHD difference in two humeral positions was seen between the two groups. However, RRDD value was significantly greater in subcoracoid impingement group (p<0.05). Conclusion: No significant difference of CHD was seen between the subcoracoid impingement group and the control group. RRDD value was greater in subcoracoid impingement group suggesting that individualized coracohumeral distance in internal rotation should be taken into account when assessing patients with subcoracoid impingement.

• Restorative Dentistry and Endodontics
• /
• v.34 no.3
• /
• pp.169-176
• /
• 2009

Diabetes Mellitus (DM) is a syndrome accompanied with the abnormal secretion or function of insulin, a hormone that plays a vital role in controlling the blood glucose level (BGL). Type land 2 DM are most common form and the prevalence of the latter is recently increasing, The aim of this article was to assess whet her Type 2 DM could act as a predisposing risk factor on the pulpo-periapical pathogenesis. Previous literature on the pathologic changes of blood vessels in DM was thoroughly reviewed. Furthermore, a histopathologic analysis of artificially-induced periapical specimens obtained from Type 2 diabetic and DM-resistant rats was compared. Histopathologic results demonstrate that the size of periapical bone destruction w as larger and the degree of pulpal inflammation was more severe in diabetic rats, indicating that Type 2 D M itself can be a predisposing risk factor that makes the host more susceptible to pulpal infection. The possible reasons may be that in diabetic state the lumen of pulpal blood vessels are thickened by atheromatous deposits, and microcirculation is hindered, The function of polymorphonuclear leukocyte is also impair ed and the migration of immune cells is blocked, leading to increased chance of pulpal infection. Also, lack of collateral circulation of pulpal blood vessels makes the pulp more susceptible to infection. These decrease the regeneration capacity of pulpal cells or tissues, delaying the healing process, Therefore, when restorative treatment is needed in Type 2 DM patients, dentists should minimize irritation to the pulpal tissue un der control of BGL.

• Journal of radiological science and technology
• /
• v.28 no.1
• /
• pp.33-44
• /
• 2005

The objective of this study is to supply the good quality of experts the radiation industries in Korea and develop the major subject matter needed in the radiation industries and the curriculum in order to execute it for the variation of fields of employment at the department of radiation in the junior college and the development of the percentage of employment. In addition, this study is to improve the level of radiation experts engaged in the industries in quality, and it is to improve the social recognition of radiation rather negative now because of the development of radiation industry. As for the core results of this research, it was to suggest the detailed choice method curriculum proper to the service fields of radiation industries, but it may be subject to change due to each college's property and the educational objectives. From the result of this research above, it may be summed up as follows. First, as for the detailed curriculum by the service field, this study was to organize two subject matters: 1. the subject matter proper to the field of using the radiation, and 2. the subject matters proper to the safety control field of radiation. Second, as for the detailed curriculum by the pattern of industries, this study was to organize the four subject matters: 1. the subject matter needed in the manufactures, 2. the subject matter needed in the nondestructive testing industries, 3. the subject matter needed in the sales agencies, and 4. the subject matter needed in the laboratories. This study was to suggest the operational model about the curriculum in order to execute these subject matters. It could be executed as two methods below. First, one method is to execute the major systems by the medical field and industrial field in the third course at the department of radiation in the junior college now. Second, the other method is to make them specialize the industrial radiation in the Advanced Course(one year course) after the graduation of junior college. To operate these curricula successively it needs to assume the deeper research and the development of materials about the subject matters related to the nuclear radiation industries hereafter. In addition, it needs to solve the security of finance like the manpower of professor, space for practice, and the educational appliances, etc. needed in the operation of subject matters. Finally, the effect and result from the development or revision of college curriculum did not come out in a short time. It will require considerable time until the undergraduates at the department in the junior college finish a set of curriculum newly developed, and graduate the university, and can get the results while they engage in their works in the industrial sites. Accordingly, all the interested parties have to anticipate the results of this research with the patience in long-standing point of view. Also, this researcher considers it as it is willing to give them the continuous interest and support.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.4
• /
• pp.459-464
• /
• 2008

This study was performed to investigate the effect of calcium-rich large anchovy on calcium metabolism in rats for 5 weeks. Experimental animals were randomly assigned to 5 treatments with 14 heads of Spraque Dawley male rats in each group. The experimental diets were as follows; market milk group (M) as control, market milk+calcium-rich large anchovy group (MA), market milk＋calcium carbonate group (MC), market milk+calcium lactate group (ML), and enriched-calcium market milk group (M2), which were formulated with commercially semi-purified rat chow (AIN-diet) to maintain the same level of calcium (1%) in all groups. Femur lengths of M and M2 groups were significantly higher than other groups. Bone mineral density (BMD) and bone mineral content (BMC) and calcium content of femur were the highest in MA group than other groups. In vitro and in vivo calcium absorption rates were high in MA group (7.30% vs 27.50%) compared with those of the other groups. Serum total-cholesterol and HDL-cholesterol levels were significantly different between M group and MA group (p<0.05). Creatinine levels were significantly higher in M, MA and MC groups than in M2 group (p<0.05). Serum calcium, osteocalcin and ALPase activities were higher in calcium-rich large anchovy (MA) group among the treatments, but there was no significant difference. SGOT activity was significantly lower in M2 group than those of M, MA and MC groups (p<0.05). These results may indicate that the calcium-rich large anchovy has enforced the BMD, BMC and calcium absorption rates of in vitro and in vivo compared with the other groups and might be a calcium-enriched food with large anchovy.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.10
• /
• pp.1545-1554
• /
• 2010

Korean government will set up the nationwide food safety system with strict control of hazardous nutrients like sugar, fatty acids and sodium as well as advanced nutrition education system. In addition, almost one hundred percent of school food service rate forced the government to consider more effective ways to upgrade the nutritional status of school meals. The object of our study was to provide the data on content and consumption of sugar in school meal for the nationwide project. For this purpose, we surveyed the sugar content of 842 school meal menus and their intake level for 154 days in 8 schools in Daejeon and Chungcheong Province. Sugar contents, the sum of the quantity of 5 sugars commonly detected in food, were analysed with HPLC-RID (Refractive Index Detector). Sugar intakes were calculated by multiplying the intake of each menu to the sugar content of that menu. The sugar content was highest in the desserts, which include fruit juices, dairy products and fruits. Sugar content of side dish was high in sauces and braised foods. Sugar intake from one dish is high in beverage and dairy product, and one dish meals contribute greatly to sugar intake because of their large amount of meal intake. The average lunch meal intakes of second grade and fifth grade elementary school students were 244 g/meal and 304 g/meal, respectively. The meal intake of middle school student was 401 g/meal. The average sugar intake from one day school lunch was 4.22 g (4.03 g on elementary and 5.31 g on middle school student), which is less than 10% of daily sugar reference value for Koreans. The result of this study provides exact data of sugar intake pattern based on the content of sugar which is matched directly to the meals consumed by the students.

• Korean Journal of Remote Sensing
• /
• v.35 no.6_2
• /
• pp.1117-1132
• /
• 2019

Forest covers 30% of the Earth's land area and plays an important role in global carbon flux through its ability to store much greater amounts of carbon than other terrestrial ecosystems. The Gross Primary Production (GPP) represents the productivity of forest ecosystems according to climate change and its effect on the phenology, health, and carbon cycle. In this study, we estimated the daily GPP for a forest ecosystem using remote-sensed data from Moderate Resolution Imaging Spectroradiometer (MODIS) and machine learning algorithms Support Vector Machine (SVM). MODIS products were employed to train the SVM model from 75% to 80% data of the total study period and validated using eddy covariance measurement (EC) data at the six flux tower sites. We also compare the GPP derived from EC and MODIS (MYD17). The MODIS products made use of two data sets: one for Processed MODIS that included calculated by combined products (e.g., Vapor Pressure Deficit), another one for Unprocessed MODIS that used MODIS products without any combined calculation. Statistical analyses, including Pearson correlation coefficient (R), mean squared error (MSE), and root mean square error (RMSE) were used to evaluate the outcomes of the model. In general, the SVM model trained by the Unprocessed MODIS (R = 0.77 - 0.94, p < 0.001) derived from the multi-sites outperformed those trained at a single-site (R = 0.75 - 0.95, p < 0.001). These results show better performance trained by the data including various events and suggest the possibility of using remote-sensed data without complex processes to estimate GPP such as non-stationary ecological processes.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.4
• /
• pp.503-514
• /
• 2011

In this research, the seismic connection details for two concrete-filled U-shape steel beam-to-H columns were proposed and cyclically tested under a full-scale cruciform configuration. The key connecting components included the U-shape steel section (450 and 550 mm deep for specimens A and B, respectively), a concrete floor slab with a ribbed deck (165 mm deep for both specimens), welded couplers and rebars for negative moment transfer, and shear studs for full composite action and strengthening plates. Considering the unique constructional nature of the proposed connection, the critical limit states, such as the weld fracture, anchorage failure of the welded coupler, local buckling, concrete crushing, and rebar buckling, were carefully addressed in the specimen design. The test results showed that the connection details and design methods proposed in this study can well control the critical limit states mentioned above. Especially, the proposed connection according to the strengthening strategy successfully pushed the plastic hinge to the tip of the strengthened zone, as intended in the design, and was very effective in protecting the more vulnerable beam-to-column welded joint. The maximum story drift capacities of 6.0 and 6.8% radians were achieved in specimens A and B, respectively, thus far exceeding the minimumlimit of 4% radians required of special moment frames. Low-cycle fatigue fracture across the beam bottom flange at a 6% drift level was the final failure mode of specimen A. Specimen B failed through the fracture of the top splice plate of the bolted splice at a very high drift ratio of 8.0% radian.