• 한국해양학회지
• /
• 제19권1호
• /
• pp.18-23
• /
• 1984

타원형 섬에 의한 조석파의 산란 이론에 근거하여, 제주도 주변의 M$_{2}$ 반일주조 조석을 구명하였다. 제주도를 수심이 일정한 해양 가운데 놓여있는 타원형의 섬으로 근사화한 후, 입사파와 산란파의 진폭을 연안 경계조건와 7개 검조소의 조화상수에 대한 최소자승법을 통하여 결정하였다. 이와 같은 이론식에 근거하여 제주도 주변M$_{2}$조에 대한 조석도를 해석적으로 작성하였다.

• 반도체디스플레이기술학회지
• /
• 제6권1호
• /
• pp.31-36
• /
• 2007

Effect of coulomb friction and backlash on the single loop position control has been studied for the precision position control. We have showed the limit cycle on the single loop system which used a ball screw that had the backlash. Also, we have made an inner loop with a classical velocity and torque controller which was forcing the current of d axis to be zero by using a permanent-magnet synchronous motor and composed the outer loop with linear encoder for sensing a position of the loader. Also, we have used least squares fit(LSF) observer for reducing noise when we got velocity from position outputs. We have shown a good result by using the dual loop through simulation and experiment.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.750-752
• /
• 2003

The objective of this investigation is to compare the geometric precision of Rigorous Sensor Model and Rational Function Model for QuickBird images. In rigorous sensor model, we use the on-board data and ground control points to fit an orbit; then, a least squares filtering technique is applied to collocate the orbit. In rational function model, we first use the rational polynomial coefficients provided by the satellite company. Then the systematic bias of the coefficients is compensated by an affine transformation using ground control points. Experimental results indicate that, the RFM provides a good approximation in the position accuracy.

• 무역학회지
• /
• 제44권6호
• /
• pp.169-185
• /
• 2019

The purpose of this study is to analyze the structural relationships of perceived value, price sensitivity, and satisfaction between brand image and purchase intention of consumers who have experience of overseas direct purchase. This study collected questionnaires used to analyze these structural relationships. Using the R's plspm package, we analyzed the PLS (partial least squares) structural equation model. In order to examine the relationship between perceived value and price sensitivity, the research model was modified and analyzed. As a result, not only the adoption of the research hypothesis, but also the goodness of fit was higher than before the research model modifying, and the relationship between perceived value and price sensitivity was further verified. The modified research model has higher academic value, so it is necessary to select it as the final proposal model.

• 유통과학연구
• /
• 제18권1호
• /
• pp.107-121
• /
• 2020

Purpose: Shared mobility services are the most notable in the shared economy; however, they have yet to be activated in Korea due to various regulations and conflicts amongst stakeholders. Nevertheless, shared mobility has become an irresistible trend of the times, as it can cause a great deal of economic and environmental benefits. In this vein, the purpose of this study is to contribute to the revitalization of shared mobility services in Korea and to provide service providers with implications for developing consumer-oriented marketing strategies. Research design, data and methodology: Based on the reasons that the users do not use shared mobility service, the factors influencing the behaviors of shared mobility users are structured and analyzed in a reliable, technical and procedural manner. To this end, the theory of reasoned action (TRA) of Ajzen and Fisbbein, the initial trust model (ITM), task technology fit (TTF) and switching cost (SC) are adopted. A total of 202 questionnaires were collected from the respondents who were aware of shared mobility. Then statistical processing of the collected data used SmartPLS(v.3.2.8), a PLS-SEM (Partial Least Squares Structural Equation Modeling) analysis program. The steps of the analysis are as follows. First, a PLS-Algorithm analysis was performed to evaluate the measurement model, and a Bootstraping and Blindfolding analysis was performed to evaluate the structural model and verify the hypotheses. Second, a multi-group analysis (PLS-MGA) was conducted to further analyze the differences depending on whether or not users experienced shared mobility service. Results: The results showed that initial trusts model (ITM) and task technology fit (TTF) have positive effects on users' behaviors through the mediation of the intention to use. As opposed to the assumption, switching costs did not have negative moderating effects in relation to the intention to use and users' behaviors. The influence of IT self-efficacy was significant, depending on the prior experience to use shared mobility services. Conclusions: This study will contribute to the revitalization of domestic shared mobility services and the formulation of service providers' marketing strategies. In future studies, there is a need to explore, reconstruct, and validate factors other than the impact factors of the shared mobility services used in this research model.

• International Journal of Concrete Structures and Materials
• /
• 제8권2호
• /
• pp.129-139
• /
• 2014

In this study, the concrete fracture energy was obtained using the three point notched beam test method developed by Hillerborg et al. (Cem Concr Res 6(6):773-782, 1976). A total of 12 notched concrete beams were tested under two different loading conditions: constant stroke control and constant crack mouth opening displacement (CMOD) control. Despite individual fracture energies obtained from the two different loading conditions showing some variation, the average fracture energy from both loading conditions was very similar. Furthermore, the results obtained support the idea that a far tail constant "A" could change the true fracture energy by up to 11 %, if it is calculated using CMOD instead of LVDT. The far tail constant "A" is determined using a least squares fit onto a straight line according to Elices et al. (Mater Struct 25(148):212-218, 1992) and RILEM report (2007). It was also observed that the selection of the end point can produce variations of the true fracture energy. The end point indicates the point in the experiment at which to stop. An end point of 2 mm has been recommended, however, in this study other end points were also considered. The final form of the bilinear softening curve was determined based on Elices and Guinea's methods (1992, 1994) and RILEM report (2007). This paper proposes a bilinear stress-crack opening displacement curve according to test results as well as the CEB-FIP model code.

• Journal of Power Electronics
• /
• 제17권2호
• /
• pp.501-513
• /
• 2017

The fundamental small-signal modeling of lithium-ion (Li-ion) batteries and a parameter evaluation approach are investigated in this study to describe the dynamic behaviors of small signals accurately. The main contributions of the study are as follows. 1) The operational principle of the small signals of Li-ion batteries is revealed to prove that the sinusoidal voltage response of a Li-ion battery is a result of a sinusoidal current stimulation of an AC small signals. 2) Three small-signal measurement conditions, namely stability, causality, and linearity, are proved mathematically proven to ensure the validity of the frequency response of the experimental data. 3) Based on the internal structure and electrochemical operational mechanism of the battery, an AC small-signal model is established to depict its dynamic behaviors. 4) A classical least-squares curve fitting for experimental data, referred as Levy's method, are introduced and developed to identify small-signal model parameters. Experimental and simulation results show that the measured frequency response data fit well within reading accuracy of the simulated results; moreover, the small-signal parameters identified by Levy's method are remarkably close to the measured parameters. Although the fundamental and parameter evaluation approaches are discussed for Li-ion batteries, they are expected to be applicable for other batteries.

• Bulletin of the Korean Chemical Society
• /
• 제30권9호
• /
• pp.2061-2065
• /
• 2009

Two simple algorithm modifications are made to the THRASH data retrieval program with the aim of improving analysis speed for complex Fourier transform ion cyclotron resonance (FTICR) mass spectra. Instead of calculating the least-squares fit for every charge state in the backup charge state determination algorithm, only some charge states are pre-selected based on the plausibility values obtained from the FT/Patterson analysis. Second, a modification is made to skip figure-of-merit (FOM) calculations in the central m/z region between two neighboring peaks in isotopic cluster distributions, in which signal intensities are negligible. These combined modifications result in a significant improvement in the analysis speed, which reduces analysis time as much as 50% for ubiquitin (8.6 kDa, 76 amino acids) FTICR MS and MS/MS spectra at the reliability (RL) value = 0.90 and five pre-selected charge states with minimal decreases in data analysis quality (Table 3).

• Industrial Engineering and Management Systems
• /
• 제6권2호
• /
• pp.94-105
• /
• 2007

Measurement technology plays an important role in discrete manufacturing industry. Probe-type coordinate measuring machines (CMMs) are normally used to capture the geometry of part features. The measured points are then fit to verify a specified geometry by using the least squares method (LSQ). However, it occasionally overestimates the tolerance zone, which leads to the rejection of some good parts. To overcome this drawback, minimum zone approaches defined by the ANSI Y14.5M-1994 standard have been extensively pursued for zone fitting in coordinate form literature for such basic features as plane, circle, cylinder and sphere. Meanwhile, complex features such as torus have been left to be dealt-with by the use of profile tolerance definition. This may be impractical when accuracy of the whole profile is desired. Hence, the true deviation model of torus is developed and then formulated as a minimax problem. Next, a relatively new and simple population based evolutionary approach, particle swarm optimization (PSO), is applied by imitating the social behavior of animals to find the minimum tolerance zone torusity. Simulated data with specified torusity zones are used to validate the deviation model. The torusity results are in close agreement with the actual torusity zones and also confirm the effectiveness of the proposed PSO when compared to those of the LSQ.

• Bulletin of the Korean Chemical Society
• /
• 제28권7호
• /
• pp.1135-1140
• /
• 2007

Pseudo-first-order rate constants (kobs) for the reaction of N-benzylphthalimide (NBPT) with HO- have been determined at 2.0 × 10?4 M NBPT, 1.0 × 10?3 and 2.0 × 10?3 M NaOH as well as varying concentrations of cetyltrimethylammonium bromide ([CTABr]T = 0.0-1.7 × 10?1 M). The effects of [CTABr]T ? CMC (with CMC representing the critical micelle concentration of CTABr) on kobs have been analyzed in terms of Berezin's pseudophase (BPP) model and pseudophase ion-exchange (PIE) model. Although both models give the best observed data fit with least-squares values not significantly different from each other, the calculated values of KS from BPP model appear to be more reliable compared to those from PIE model because the values of KS from BPP model are similar to the corresponding KS values determined spectrophotometrically.