The present study investigates the impact shear strength of thermal aged Sn-3Ag-0.5Cu lead-free solder joints at impact speeds ranging from 0.5 m/s to 2.5 m/s. The specimens were thermal aged for 24, 100, 250 and 1000 hours at $100^{\circ}C$. The experimental results demonstrate that the shear strength of the solder joint decreases with an increase in the load speed and aging time. The shear strength of the solder joint aged averagely decreased by 43% with an increase in the strain rate. For the as-reflowed specimens, the mode II stress intensity factor ($K_{II}$) of interfacial IMC between Sn-3.0Ag-0.5Cu and a copper substrate also was found to decrease from $1.63MPa.m^{0.5}$ to $0.97MPa.m^{0.5}$ in the speed range tested here. The degradations in the shear strength and fracture toughness of the aged solder joints are mainly caused by the growth of IMC layers at the solder/substrate interface.
Objectives : The aim of this study is to investigate the effect of Shinmun-acupuncture stimulation on the relationship of change in electrocardiopgraphy (ECG). Methods : For this purpose, 11 healthy volunteers were acupunctured at Shinmun acupoint using the reinforcing or reducing by inserting the needle in the same direction as the channel runs or in the opposite direction (迎隨補瀉). Then, we measured and observed the change of standard leads I, II and III in ECG. Results : In lead I , acupuncture treated groups were increased the activity of PR interval and PR segment compared to the control group. In lead II, during the acupuncture treated group by inserting the needle in the opposite direction as the channel runs was increased the activity of T wave duration, and after the acupuncture group by inserting the needle in the same direction as the channel runs was increased the activity of PR interval. In lead III, acupuncture treated groups were increased the activity of ST duration, PR interval and QT interval. Conclusions : These results suggested that Shinmun acupuncture stimulation plays an important role on the activities of ECG.
Journal of Korean Institute of Industrial Engineers
/
v.7
no.1
/
pp.13-20
/
1981
Three inspection-ordering policies of a part with three types of lead times, i. e., expedited lead time, special lead time and regular lead time are considered. Policy I : The original part is replaced by a spare immediately after delivery, even if the original part is still operating. Policy II : The delivered spare is put into inventory until the original part failes. Policy III : The original part is inspected once again immediately after the delivery of the spare. If it is in a good state, the original part is used up to its mean degradation time, then replaced. If it is in a degradation state, the original part is replaced by a spare. A cost effectiveness for each policy is analyzed. Optimal inspection-ordering policy which maximizes a cost effectiveness is obtained. Time to degradation distribution and time to failure distribution are assumed to be Weibull and exponential, respectively. Variations of policies are observed with respect to variations of associated costs.
Abjal P. Shaik;Abbas H. Alsaeed;Asma S. Shaik;Abdullah A. Alyousef;Vamsee K. Bammidi;Kiranmaye Sampathirao
Advances in environmental research
/
v.11
no.1
/
pp.31-38
/
2022
The current observational epidemiological study analyzed blood lead levels (BLLs) in occupationally exposed workers from Riyadh region, Saudi Arabia and correlated them with the alterations in the differential cell populations of the WBC panel (lymphocytes [Lym %], mixed [Mid %] cells, and neutrophils [Neu %]). In addition, we examined the effect of confounding factors and their relation to BLLs. BLLs were estimated using the LeadCare II analyzer and hematological parameters using the ADVIA 120 analyser. An inferential analysis was conducted to detect association between the observations and the subjects' clinical characateristics. A total of 132 male subjects were included in the final analyses. Based on CDC guidelines, the subjects were categorized as Group I (BLL <10 ㎍/dL; n=118) or Group II (BLL >10 ㎍/dL; n=14) with average BLLs of 4.4 ㎍/dL and 18.1 ㎍/dL, respectively (p <0.0001). The percentages of Mid cells (p <0.0001) and neutrophils (p=0.048), were significantly altered in subjects with High BLL. A regression analysis indicated that subjects > 50 years of age had significantly higher BLLs (53.2 ㎍/dL) than younger age sub-groups (p <0.0001). Age, education, and profession were significant predictors for lead toxicity. Pb exposure is a major public health issue in Saudi Arabia and calls for further investigations on the cellular and molecular effects on hematological system.
This paper presents investigations on 60 glass beads excavated from floorless tombs of Eunpyeong Newtown site to figure out composition and lead isotope ratio by SEM-EDS and TIMS, which show the difference between their compositions and Pb provenance of lead glass. The results of the composition analysis are that excavated glass are mainly divided into Potash glass($K_2O$-CaO-$SiO_2$) and Potash-lead glass($K_2O$-PbO-$SiO_2$) and the samples excavated from III-3 floorless tombs No.1005 are presumed not glass but Quartz. The transparent 9 lead glasses excavated from II-3 floorless tomb No.101 and III-3 floorless tomb No.908 seem to be manufactured by the same raw material at same site because the concentration of their compositions are well accorded with each other and deviations of them are very limited. As a result of principal component analysis(PCA), glass beads excavated are largely assort to two groups, Potash glass and Potash lead glass as well. That is, glass beads excavated from Eunpyeoung Newtown sites are quite different two types of main composition. In addition, the results of Pb provenance analysis used in lead glass confirm that most lead glass are significantly correlated with galena of northern China.
Lilis Ruth;Fischbein Alf;Diamond Sidney;Anderson Henry A.;Selikoff Irving J.;Blumberg William E.;Eisinger Josef
대한예방의학회:학술대회논문집
/
1994.02a
/
pp.549-559
/
1994
A subgroup or workers from a secondary lead smelter was defined to include those with blood lead levels not exceeding $80{\mu}g/100\;ml$ and with no pest history of elevated blood lead. Central nervous system symptoms (tiredness, sleeplessness, irritability, headache) were reported by 55% of the group and muscle and joint pain by 39%. Zinc proteporphyrin (ZPP) levels were elevated in 71% or cases. Low hemoglobin levels (less than 14 gm/l00 ml) were round in more than a third of the workers. While BUN and creatinine were mostly in the normal range, there - nevertheless n correlation between ZPP and both BUN and creatinine. Reduced nerve-conduction velocities were present in 25% or the group; this was not significantly different from findings in Ii control group. The data indicate that n blood level of $80{\mu}g/100\;ml$ is an inappropriate biological guide in the prevention or lead disease.
The carboxylated multiwall carbon nanotubes (MWCNT-COOH) and functionalized with isatin derivative (MWCNT-isatin) have been used as efficient adsorbents for the removal of lead (Pb) from aqueous solutions. The influence of variables including pH, concentration of the lead, amount of adsorbents and contact time was investigated by the batch method. The adsorption of the lead ions from aqueous solution by modified MWCNTs was studied kinetically using different kinetic models. The kinetic data were fitted with pseudo-first-order, pseudo-second-order, and intra-particle diffusion models. The sorption process with MWCNT-COOH and MWCNT-isatin was well described by pseudo-second-order and pseudo-first-order kinetics, respectively which it was agreed well with the experimental data. Also, it involved the particle-diffusion mechanism. The values of regression coefficient of various adsorption isotherm models like Langmuir, Freundlich and Tempkin to obtain the characteristic parameters of each model have been carried out. The Langmuir isotherm was found to best represent the measured sorption data for both adsorbent.
A chloroform membrane system containing a given mixture of benzylaza-12-crown-4 and oleic acid is introduced for the selective and efficient transport of $Pb^{2+}$ ion. The transport was capable of moving metal ions ‘up-hill’. In the presence of ${S_2O_3}^{2-}$ion as a suitable metal ion acceptor in the receiving phase, the amount of lead ion transport across the liquid membrane after 150 minutes is (95.0 ${\pm}$ 1.7)%. The selectivity and efficiency of lead transport from aqueous solution containing $Tl^+,\;Ag^+,\;Mg^{2+},\;Ca^{2+},\;Co^{2+},$$Ni^{2+},\;Cu^{2+},\;Zn^{2+},\;Hg^{2+}$ and $Cd^{2+}$were investigated. In the presence of thiosulfate as a suitable masking agent in the source phase, the interfering effects of $Ag^+\;and\;Cu^{2+}$ were diminished drastically.
Polysaccharides are very effective adsorbents for heavy metals. In this study, the adsorption characteristics of various polysaccharides for heavy metal adsorption were investigated. Tested polysaccharides were homogeneous polysaccharides such as curdlan, chitin, starch, cellulose, Avicel, and Solka floc and heterogeneous polysaccharides such as zooglan, locust bean gum, ghatti gum, pectin, and xylan. Lead(II) adsoption characteristic on these polysaccharides followed Freundlich isotherm and the isotherm parameters were calculated. For adsorption of lead(ll), Avicel, starch, and zooglan were found to be good adsorbents.
In this study, the colorimetric sensor, polyester (PET) fabric dyed with lead (II) acetate (Pb(C2H3O2)2), was fabricated and characterized for the detection of the hydrogen sulfide (H2S). The surface morphology of the fabric was determined using scanning electron microscope and energy-dispersive X-ray spectroscopy. The optical properties of the fabric were evaluated by measuring the variation in the blue value of an RGB sensor. The fabric showed a significant color change, high linearity (R2 : 0.98256), and fast response time (< 1.0 s) when exposed to H2S. This is because the sensor is highly porous and permeable to the gas. The fabric can not only be used as a hydrogen sulfide sensor but also be used to detect and prevent H2S influx using sticky tape on pipelines.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.