• The Journal of the Korea Contents Association
• /
• v.21 no.2
• /
• pp.520-527
• /
• 2021

In this study, we focused on the low practicality of traditional outdoor advertisements due to uniformity of materials, shapes, and designs, so in order to improve it, we will analyze impact on the practicality of outdoor advertisements depends on the attached type of advertising signboards. The research method is to set up a research model and hypotheses through a literature review and conduct a survey and then perform factor analysis and hierarchical regression analysis. Hypothesis1. The evaluation factors (readability, formability or symbolism) of outdoor advertising signboard in traditional markets will affect their practicality. Hypothesis 2. The type of attached advertising signboards (protruding type or wall-type) in traditional markets will control the impact of each evaluation factors' on practicality. In a result, readability and formability will affect practicality. To increase practicality, the size, color, font, layout and etc. of outdoor advertising signboards should be well recognized to get the better understanding. Also, practicality will be increased by the harmonization and the sense of balance.

• The Journal of the Korea Contents Association
• /
• v.22 no.3
• /
• pp.54-61
• /
• 2022

Ship is a huge system including a variety of pipe arrangements. Pipes are installed according to the design layout, however the end poistion of pipes are not well matched owing to its measurement and construction errors. In this situation, the customized pipe fitting is frequently designed to connect with both pipes, the position of which are manually measured. This paper focused that these two coordinates are measured by point cloud from RGBD sensor and the relative transformation induced by positional and orientational differences is calculated by inverse kinematics in robotics theory. Therefore, the result applies for the methodology of the pipe connection design. The pipe coordinate that is estimated by the matching and the probabilistic RANSAC method will be verified by experiments. The kinematic design parameters are computationally calculated by using the minimum degree of freedom that connects both pipe coordinates.

• Land and Housing Review
• /
• v.14 no.2
• /
• pp.97-107
• /
• 2023

This study examined how to better provide quality temporary housing for people in the event of natural and social disasters. Design for Manufacture and Assembly (DfMA) is suitable for creating an efficient planning model for the mass production and transport of a modular house. The proposed DfMA model has the following three characteristics. First is the division of the modular house into service modules and functional modules and to create diversity by developing standard parts and multi-functional parts. Second is a flexible layout suitable for various site conditions. Such flexible layouts would allow identical homes to be mass produced and deployed to a variety of locations, both nationally and internationally. Third is to simplify and minimize the automation process with dry construction to increase production efficiency. Application of this DfMA design method can lead to reduced construction time and cost and improve housing quality.

• Industry Promotion Research
• /
• v.9 no.2
• /
• pp.137-151
• /
• 2024

This study analyzes the feng shui characteristics of the location of Seon-un Temple in Do-sol Mountain, Gochang from a metaphysical and selfish perspective through field research and literature review.A characteristic element of feng shui was that it prioritized harmony with nature and made it a reference point for selecting a location through a reasonable method. In the Silla Dynasty, adherent monks studied in the Gangseo area, where the Hyeongsepungsu first appeared, and this Hyeongsepungsu of the Gangseo District Law flowed into Korea and played a leading role in selecting the location of the temple and arranging Garam. Seon-un Temple was located under Do-sol Mountain and had no choice but to have great significance, and it was a practice of the desire to achieve Buddhist perfection through Do-sol Stream and Do-sol Small Temple, which enter the kingdom of Buddha. A s a result, the location of Seon-un Temple under Do-sol Mountain in Gochang reflected a variety of feng shui characteristics. In particular, the location of Sun-un Temple in Do-sol Mountain logically used the characteristics and meanings of feng shui and practiced becoming one with nature, which is aimed at spreading Buddhist doctrine and ideology, which has the holiest meaning of Buddhism.

• Geomechanics and Engineering
• /
• v.37 no.3
• /
• pp.293-306
• /
• 2024

Influenced by the alternating effects of dynamic and static pressure during the mining process of close range coal seams, the surrounding rock support of cross mining roadway is difficult and the deformation mechanism is complex, which has become an important problem affecting the safe and efficient production of coal mines. The paper takes the inclined longwall mining of the 10304 working face of Zhongheng coal mine as the engineering background, analyzes the key strata fracture mechanism of the large inclined right-angle trapezoidal mining field, explores the stress distribution characteristics and transmission law of the surrounding rock of the roadway affected by the mining of the inclined coal seam, and proposes a segmented and hierarchical support method for the cross mining roadway affected by the mining of the close range coal seam group. The research results indicate that based on the derived expressions for shear and tensile fracture of key strata, the ultimate pushing distance and ultimate suspended area of a right angle trapezoidal mining area can be calculated and obtained. Within the cross mining section, along the horizontal direction of the coal wall of the working face, the peak shear stress is located near the middle of the boundary. The cracks on the floor of the cross mining roadway gradually develop in an elliptical funnel shape from the shallow to the deep. The dual coupling support system composed of active anchor rod support and passive U-shaped steel shed support proposed in this article achieves effective control of the stability of cross mining roadways, which achieves effective control of floor by coupling active support and preventive passive support to improve the strength of the surrounding rock itself. The research results are of great significance for guiding the layout, support control, and safe mining of cross mining roadways, and to some extent, can further enrich and improve the relevant theories of roof movement and control.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.12 s.354
• /
• pp.23-32
• /
• 2006

Fast and accurate power bus design (FAPUD) method for multi-layers high-speed digital boards is devised for the power supply network design tool for accurate and precise high speed board. FAPUD is constructed, based on two main algorithms of the PBEC (Path Based Equivalent Circuit) model and the network synthesis method. The PBEC model exploits simple arithmetic expressions of the lumped 1-D circuit model from the electrical parameters of a 2-D power distribution network. The circuit level design based on PBEC is carried with the proposed regional approach. The circuit level design directly calculates and determines the size of on-chip decoupling capacitors, the size and the location of off-chip decoupling capacitors, and the effective inductances of the package power bus. As a design output, a lumped circuit model and a pre-layout of the power bus including a whole decoupling capacitors are obtained after processing FAPUD. In the tuning procedure, the board re-optimization considering simultaneous switching noise (SSN) added by I/O switching can be carried out because the I/O switching effect on a power supply noise can be estimated over the operation frequency range with the lumped circuit model. Furthermore, if a design changes or needs to be tuned, FAPUD can modify design by replacing decoupling capacitors without consuming other design resources. Finally, FAPUD is accurate compared with conventional PEEC-based design tools, and its design time is 10 times faster than that of conventional PEEC-based design tools.

• Journal of Korea Game Society
• /
• v.7 no.3
• /
• pp.67-76
• /
• 2007

As the performance of game consoles is so highly progressed that services such as internet browsing become available on the consoles, the need for text input schemes on game consoles is rapidly raised. In this paper, we present a text input method of alphabet characters and several symbols using a gamepad, which is a widely used input device for most game consoles. Just like other text input methods using gamepad, our method allows users to enter texts by manipulating the gamepad with a user interface displayed on the screen of the console. A key idea of this paper is to present the user interface that is similar to the $4{\times}3$ keypad on mobile phones. The motivation of this idea is a principle that the experience of using a text input tool can be transferred to another tool that has similar interface. Another motivation is that the keyboard-based interface is too complex to be easily manipulated by simple input from a keypad, which is four orthogonal directions and several fire signals. Since most of keys on keypad of $4{\times}3$ keys are represented by a combination of two orthogonal directions, users feel easier in entering texts using keypad-based interface. We prove this argument in this paper by a user test of ten subjects. After about two experiment sessions, subjects reach 13 WPM in average, which proves that the proposed text input method enables much faster text input than the existing keyboard-based text input methods.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.1
• /
• pp.97-104
• /
• 2016

Because of rapid growth of data size, the number of data storage has been increased. When using multiple data storages, a distribute file system is essential to insure the availability of data files. The power consumption is a major problem when using a distributed file system with many data storages. Previous works have aimed at reducing the energy consumption with efficient file block layout by changing some data servers into stand-by mode. The file block migration has not been seriously considered because migration causes large cost. But when we consider addition of a new data server or file, file block migration is needed. This paper formulates the minimization of data block migration as an ILP optimization problem and solves it using branch-and-bound method. Using this technique, we can maximize the number of stand-by data servers with the minimum number of file block movement. However, computation time of branch-and-bound method of an ILP optimization problem increases exponentially as the problem size grows. Therefore this paper also proposes a data block and data server grouping method to solve many small ILP problems.

• Tunnel and Underground Space
• /
• v.29 no.4
• /
• pp.243-261
• /
• 2019

Microseismic monitoring technologies have been recognized for its superiority over traditional methods and are used in domestic and overseas underground mines. However, the complex gangway layout of underground mines in Korea and the mixed structure of excavated space and rock masses make it difficult to estimate the microseismic propagation and to determine the arrival time of microseismic wave. In this paper, experimental studies were carried out to determine the source location according to various arrival picking methods and dimensional conditions. The arrival picking methods used were FTC (First Threshold Cross), Picking window, AIC (Akaike Information Criterion), and 2-D and 3-D source generation experiments were performed, respectively, under the 2-D sensor array. In each experiment, source location algorithm used iterative method and genetic algorithm. The iterative method was effective when the sensor array and source generation were the same dimension, but it was not suitable to apply when the source generation was higher dimension. On the other hand, in case of source location using RCGA, the higher dimensional source location could be determined, but it took longer time to calculate. The accuracy of the arrival picking methods differed according to the source location algorithms, but picking window method showed high accuracy in overall.

• Journal of the Korean Institute of Rural Architecture
• /
• v.21 no.2
• /
• pp.19-26
• /
• 2019

Pungsu theory is important one in the site selection and lay-out of traditional Korean village and house. In this aspect, Study with a view of Pungsu theory might be used as a proper method for understanding the traditional architecture in Korea. In this context, this study analyzes the Jeong, Dong-Ho's house which is designated no. 19 as an important folk cultural heritage, located in Jigok Ochu-gil 133-62, Godeok-myon, Yesan-gun, Chungnam province. The analysis of the site and space lay-out is carried out by Yong(Dragon), Hyoel(Auspicious Spot), Sa(Sands), Su(Water) aspects of the Pungsu(Fengshui) Hyungsei-ron. The house is depending upon soft dragon vein connecting with a earth type rear mountain. It looks southeast direction, Gonjwasonhyang(乾坐巽向). The hyeolseong(穴星) has classical venus shape, and there is no faults relatively. The Sasinsa condition is almost perfect that right blue dragon and left white tiger surround the hyeol with 3-4 layers and the facing mountain covers the front open area. The water flowing from inside of left and right mountain is joined in front of the house so it could stop flowing out of vital energy. Bibo forest(裨補樹) is placed properly to protect the easy disclose of water outlet. The house is well organized western house(西四宅) by analysis of Dongseosataek-ron(東西四宅論). Through the analysis, I found that the house has good Pungsu(Fengshui) environment fitted with Pungsu Hyungsei-ron. The house composed of small thatched roof is enclosed several times by low hills of back, left and right side. So it is believed that the site might be carefully evaluated by Yong, Hyoel, Sa, Su of Hyeongsei-ron for knowing whether the site condition could minimize the demage by strong winds and protect from the winter cold wind and secure water for drinking and farming and then selected. The method of Pungsu for evaluating the geographical condition of surrounding of a site is used as a traditional site analysis method for evaluating the suitability of long-term well and safe residence.