• 한국산학기술학회논문지
• /
• 제21권8호
• /
• pp.222-227
• /
• 2020

페로부스카이트(Perovskite) 구조의 Pb(Zr,Ti)O₃(PZT)는 우수한 강유전 특성으로 인해 유전체, 압전체, 초전체 재료로 널리 사용된다. Pb_1.3(Zr_0.52Ti_0.48)O₃조성의 스퍼터링 타겟을 제조하여 RF 마그네트론 스퍼터링 공정으로 PZT박막을 형성하였다. PZT박막은 동일 스퍼터링 출력으로 연속 제조한 단층형 PZT와 2단계화한 스퍼터링 출력으로 제조한 2층형 PZT박막으로 구분하여 제조하였다. 2층형의 PZT는 저출력의 스퍼터링 조건으로 제작한 하부층과, 단층형 PZT와 동일한 조건으로 제작한 상부층으로 이루어진다. 제조한 박막에 대한 엑스선 회절분석결과, 단층형 PZT에서는 페로부스카이트상(Perovskite Phase)과 미소한 파이로클로르상(Pyrochlore Phase)이 혼합된 상태로 존재하나, 2층형 PZT에서는 페로부스카이트상만이 검출되었다. 전자현미경과 원자힘 현미경으로 표면상태를 관찰한 결과, 2층형 PZT박막의 상부는 단층형에 비해 치밀하고 평활한 표면상태를 나타냈으며, 단층형에 비해 낮은 표면거칠기값(RMS)을 보였다. 또한 이층형 PZT는 단층형에 비해 우수한 대칭성의 분극곡선형태를 보였고, 단층형에 비해 매우 저감된 1×10^-5 A/㎠ 이하수준의 누설전류 특성을 나타냈다. 이층형 PZT에서 보이는 이러한 현상은 치밀하게 형성한 하부 PZT층이 순차적으로 형성되는 상부PZT내의 미소 파이로클로르상 형성을 억제하여, 순수한 페로부스카이트상으로의 성장을 유도한 것으로 판단된다.

• 생체재료학회지
• /
• 제22권4호
• /
• pp.290-302
• /
• 2018

Background: The main purpose of drug delivery systems is to deliver the drugs at the appropriate concentration to the precise target site. Recently, the application of a thin film in the field of drug delivery has gained increasing interest because of its ability to safely load drugs and to release the drug in a controlled manner, which improves drug efficacy. Drug loading by the thin film can be done in various ways, depending on type of the drug, the area of exposure, and the purpose of drug delivery. Main text: This review summarizes the various methods used for preparing thin films with drugs via Layer-by-layer (LbL) assembly. Furthermore, additional functionalities of thin films using surface modification in drug delivery are briefly discussed. There are three types of methods for preparing a drug-carrying multilayered film using LbL assembly. First methods include approaches for direct loading of the drug into the pre-fabricated multilayer film. Second methods are preparing thin films using drugs as building blocks. Thirdly, the drugs are incorporated in the cargo so that the cargo itself can be used as the materials of the film. Conclusion: The appropriate designs of the drug-loaded film were produced in consideration of the release amounts and site of the desired drug. Furthermore, additional surface modification using the LbL technique enabled the preparation of effective drug delivery carriers with improved targeting effect. Therefore, the multilayer thin films fabricated by the LbL technique are a promising candidate for an ideal drug delivery system and the development possibilities of this technology are infinite.

• 한국세라믹학회지
• /
• 제34권5호
• /
• pp.512-518
• /
• 1997

The high temperature oxidation behaviors of titanium nitride films prepared by PACVD technique were studied in the temperature range of from 50$0^{\circ}C$ to 80$0^{\circ}C$ under air atmosphere. Ti0.88Al0.12N film, which showed the excellent microhardness from the previous work, was investigated on its oxidation resistance compared with pure TiN film. Ti-Al-N film showed superior oxidation resistance up to $700^{\circ}C$, whereas TiN film was fast oxidized into rutile TiO2 crystallites from at 50$0^{\circ}C$. It was found that an amorphous layer having AlxTiyOz formula was formed on the surface region due to outward diffusion of Al ions at the initial stage of oxidation. The amorphous oxide layer played a role as a barrier against oxygen diffusion, protected the remained nitride layer from further oxidation, and thus, resulted in the high oxidation resistive characteristics of Ti-Al-N film.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권10호
• /
• pp.1016-1021
• /
• 1997

Magneto resistance properties in spin-valve sandwiches with various thickness of nanmagnetic layer in contact with the ferromagnetic NiFe film were investigated. The NiFe layer in contact with the NiO film was pinned by strongly exchange-biased coupling and the free NiFe layer at the film surface induced a sharp change in the magnetoresistance at -5~15Oe due to small coercivity. The NiO/NiFe/Cu/NiFe film showed a magnetoresistance ratio in the range of 2.3~2.9% and a field sensitivity above 2.2%/Oe with various of nonmagnetic layer. The NiO/NiFe/Cu/NiFe film of the field sensitivity above 2.2%/Oe suggests stang possibility of magnetic sensor matter.

• Transactions on Electrical and Electronic Materials
• /
• 제13권1호
• /
• pp.27-30
• /
• 2012

This paper proposes a micro gas sensor for measuring $H_2S$ gas. This is based on a $SnO_2$-CuO multi-layer thin film. The sensor has a silicon diaphragm, micro heater, and sensing layers. The micro heater is embedded in the sensing layer in order to increase the temperature to an operating temperature. The $SnO_2$-CuO multi layer film is prepared by the alternating deposition method and thermal oxidation which uses an electron beam evaporator and a thermal furnace. To determine the effect of the number of layers, five sets of films are prepared, each with different number of layers. The sensitivities are measured by applying $H_2S$ gas. It has a concentration of 1 ppm at an operating temperature of $270^{\circ}C$. At the same total thickness, the sensitivity of the sensor with multi sensing layers was improved, compared to the sensor with one sensing layer. The sensitivity of the sensor with five layers to 1 ppm of $H_2S$ gas is approximately 68%. This is approximately 12% more than that of a sensor with one-layer.

• Journal of Ceramic Processing Research
• /
• 제13권spc1호
• /
• pp.140-144
• /
• 2012

Ga-doped ZnO (GZO) was a limit of application on the photovoltaic devices such as CIGS, CdTe and DSSC requiring high process temperature, because it's electrical resistivity is unstable above 300 ℃ at atmosphere. Therefore, ZTO (zinc tin oxide) was introduced in order to improve permeability and thermal stability of GZO film. The resistivity of GZO (300 nm) single layer increased remarkably from 1.8 × 10-3Ωcm to 5.5 × 10-1Ωcm, when GZO was post-annealed at 400 ℃ in air atmosphere. In the case of the ZTO (150 nm)/GZO (150 nm) double layer, resistivity showed relatively small change from 3.1 × 10-3Ωcm (RT) to 1.2 × 10-2Ωcm (400 ℃), which showed good agreement with change of carrier density. This result means that ZTO upper layer act as a barrier for oxygen at high temperature. Also ZTO (150 nm)/GZO (150 nm) double layer showed lower WVTR compared to GZO (300 nm) single layer. Because ZTO has lower WVTR compared to GZO, ZTO thin film acts as a barrier by preventing oxygen and water molecules to penetrate on top of GZO thin film.

• 한국인쇄학회지
• /
• 제10권1호
• /
• pp.35-54
• /
• 1992

Direct electrostatic coating method is simple, low cost and environmentally useful method. We are investigated on the coating of carrier transfer polymer layer on the carrier generate inorganic pigment layer using direct electrostatic coating method. The sample was obtained electrostatic deposite layer by fusing and calendering on the copper phthalocyanine. we could be found several polymer thin film shows good bond properties between film and pigment layer.

• Current Photovoltaic Research
• /
• 제2권1호
• /
• pp.1-7
• /
• 2014

We developed a method of growing thin Si film at $600^{\circ}C$ by hot wire CVD using a very thin large-grained poly-Si seed layer for thin-film Si solar cells. The seed layer was prepared by crystallizing an amorphous Si film by vapor-induced crystallization using $AlCl_3$ vapor. The average grain size of the p-type epitaxial Si layer was about $20{\mu}m$ and crystallographic defects in the epitaxial layer were mainly low-angle grain boundaries and coincident-site lattice boundaries, which are special boundaries with less electrical activity. Moreover, with a decreasing in-situ boron doping time, the mis-orientation angle between grain boundaries and in-grain defects in epitaxial Si decreased. Due to fewer defects, the epitaxial Si film was high quality evidenced from Raman and TEM analysis. The highest mobility of $360cm^2/V{\cdot}s$ was achieved by decreasing the in-situ boron doping time. The performance of our preliminary thin-film solar cells with a single-side HIT structure and $CoSi_2$ back contact was poor. However, the result showed that the epitaxial Si film has considerable potential for improved performance with a reduced boron doping concentration.

• 반도체디스플레이기술학회지
• /
• 제18권1호
• /
• pp.32-37
• /
• 2019

Titanium dioxide ($TiO_2$) is a promising dielectric material in the semiconductor industry for its high dielectric constant. However, for utilization on Si substrate, $TiO_2$ film meets with a difficulty due to the large leakage currents caused by its small conduction band energy offset from Si substrate. In this study, we propose an in-situ plasma oxidation process in plasma-enhanced atomic layer deposition (PE-ALD) system to form an oxide barrier layer which can reduce the leakage currents from Si substrate to $TiO_2$ film. $TiO_2$ film depositions were followed by the plasma oxidation process using tetrakis(dimethylamino)titanium (TDMAT) as a Ti precursor. In our result, $SiO_2$ layer was successfully introduced by the plasma oxidation process and was used as a barrier layer between the Si substrate and $TiO_2$ film. Metal-oxide-semiconductor ($TiN/TiO_2/P-type$ Si substrate) capacitor with plasma oxidation barrier layer showed improved C-V and I-V characteristics compared to that without the plasma oxidation barrier layer.

• 한국진공학회지
• /
• 제21권6호
• /
• pp.354-361
• /
• 2012

유기 메모리 절연막 제작을 위해 일반적으로 사용되어지는 습식법이 아닌 건식법 중 플라즈마 중합법을 이용하였다. 유기 절연 박막으로 사용된 단량체는 Styrene과 MMA을 사용하고, 터널링 박막은 MMA를 사용하며, 메모리 박막은 열기상증착법을 이용한 Au 박막을 사용하였다. 최적화된 소자의 구조는 Au의 메모리층의 두께를 7 nm, Styrene 게이트 절연막의 두께를 400 nm, MMA 터널링 박막의 두께를 30 nm로 증착하여 제작된 부동 게이트형 유기 메모리 소자는 40/-40 V의 double sweep시 27 V의 히스테리시스 전압을 얻을 수 있었다. 이 특성을 기준하여 유기 메모리의 전하 포집 특성을 얻을 수 있었다. 유기 재료 중 MMA 대비 Styrene의 전하 포집 특성이 좋은 것으로 보아 향후 부동 게이트인 Au 박막을 유기 재료인 Styrene으로 대체하여 플렉시블 소자의 가능성을 기대한다.