• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2001년도 제17회 학술발표회 논문초록집
• /
• pp.90-93
• /
• 2001

In the present work, ultrasonic testing method has been developed to evaluate adhesive layers in rocket motor case assembly for the reliability of the rocket. The main objective of the present work was to find debonding between steel and rubber layers. The relationship between adhesion ratio and reflected ultrasonic amplitude was calculated by considering reflection coefficient at the interface between steel and rubber layers. It was found that the higher amplitude of ultrasound is reflected for the debonding area, and shown good agreements with experimental results. The ultrasonic C-scan images offers good implements for the determination of debonding area. The nondestructive testing results were compared with the micrography of destruective testing. As results, ultrasonic testing could be utilized for the evaluation of adhesive layer in the rocket motor case assembly.

• 산업공학
• /
• 제24권3호
• /
• pp.267-273
• /
• 2011

In the shipbuilding industry, since production processes are so complicated that the data collection for decision making cannot be fully automated, most of production planning and controls are based on the information provided only by field workers. Therefore, without sufficient information it is very difficult to manage the whole production process efficiently. Job status is one of the most important information used for evaluating the remaining processing time in production control, specifically, in block assembly shop. Currently, it is checked by a production manager manually and production planning is modified based on that information, which might cause a delay in production control, resulting in performance degradation. Motivated by these remarks, in this paper we propose an efficient algorithm for identifying job status in block assembly shop for shipbuilding. The algorithm is based on the multi-layer perceptron neural network model using two key factors for input parameters. We showed the superiority of the algorithm by using a numerical experiment, based on real data collected from block assembly shop.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.9.2-9.2
• /
• 2011

Ultrathin polyelectrolyte (PE) multilayer films prepared by the versatile layer-by layer (LbL) assembly method have been utilized for the preparation of light-emitting diodes, electrochromic, membrane, and drug delivery system, as well as for selective area patterning and particle surface modification because the various materials with specific properties can be inserted into the film with nano-level thickness irrespective of the size or the shape of substrate. Since the introduction of the LbL technique in 1991 by Decher and Hong, various hydrophilic materials can be inserted within LbL films through complementary interactions (i.e., electrostatic, hydrogen-bonding or covalent interaction). In this study, it is demonstrated that LbL SA multilayer films based on nucleophilic substitution reaction can allow the preparation of the highly efficient magnetic and/or optical films and nonvolatile memory devices.

• Journal of Microbiology and Biotechnology
• /
• 제14권5호
• /
• pp.1043-1046
• /
• 2004

The stability and electrochemical properties of a self-assembled layer of spinach ferredoxin on a quartz substrate and on a highly oriented pyrolytic graphite electrode were investigated. To fabricate the ferredoxin self-assembly layer, dimyristoylphosphatidylcholine was first deposited onto a substrate for ferredoxin immobilization. Surface analysis of the ferredoxin layer was carried out by atomic force microscopy to verify the ferredoxin immobilization. To verify ferredoxin immobilization on the lipid layer and to confirm the maintenance of redox activity, absorption spectrum measurement was carried out. Finally, cyclic-voltammetry measurements were performed on the ferredoxin layers and the redox potentials were obtained. The redox potential of immobilized ferredoxin had a formal potential value of -540 mV. It is suggested that the redox-potential measurement of self-assembled ferredoxin molecules could be used to construct a biosensor and biodevice.

• 폴리머
• /
• 제29권4호
• /
• pp.392-398
• /
• 2005

Layer-by-layer(LbL) 흡착에 의한 poly(ethylene-alt-m미? anhydride) (PEMAh)/poly(4-vinyl pyridine) (P4VP) 자기조립 다층박막을 제조하였다. 자기조립 다층막을 이루는 PEMAh/P4VP 두 고분자 사이의 수소 결합과 정전기적 인력이 다층막을 이루는 원동력이라는 것이 푸리에 변환 적외선(FT-IR) 분광분석에 의해서 확인되었다. 다층막의 균일한 자기조립 과정은 PEMAh/P4VP 이중층막의 적층 수 증가에 따른 UV-vis 스펙트럼의 256 nm에서 나타나는 P4VP 특성 흡수 피크의 선형적 증가에 의해서 확인할 수 있었다. 다층막을 이루는 고분자 전해질 담지 용액의 조건 변화가 다층막 형성에 미치는 영향을 살펴보기 위하여 두 고분자 용액의 농도 및 PEMAh 담지용액의 pH를 변화시키면서 다층막을 제조하였다. 다층막의 두께, 흡착된 고분자 전해질 질량 및 표면 거칠기의 변화를 UV-vis 분광 분석, 수정진동자 미량저울(quartz crystal microbalance;QCM) 및 원자 힘 현미경(atomic force microscopy;AFM)을 이용하여 측정하였다.

• 청정기술
• /
• 제13권4호
• /
• pp.293-299
• /
• 2007

막-전극 접합체(membrane electrode assembly, MEA)의 설계인자 즉, 구성요소들이 직접 메탄올 연료전지의 성능에 미치는 영향을 알아보았다. MEA에서의 촉매층과 고분자 분리막의 계면저항을 줄이기 위하여 직접 코팅법을 사용하여 제조한 MEA 구조와 조성의 최적화를 실시하였으며, 기체 확산층, 촉매량, 고분자 전해질 분리막의 두께가 직접메탄을 연료전지의 성능에 미치는 영향을 알아보고, 전기화학적 분석법을 사용하여 성능향상 요인을 분석하였다. 본 연구를 통해 직접코팅법으로 제조한 MEA의 구조와 조성에 따른 성능변화 특성을 파악할 수 있었으며, 연료극과 공기극에 총 $4\;m/cm^2$ (Pt 기준)의 촉매를 사용하였을 때, $80^{\circ}C$ 1기압의 운전 조건하에서는 최고성능 $147\;mW/cm^2$, $60^{\circ}C$, 1기압의 운전 조건하에서는 최고성능 $100\;mW/cm^2$을 확보하였다.

• Macromolecular Research
• /
• 제13권3호
• /
• pp.265-272
• /
• 2005

Polyelectrolyte membranes for humidity-sensing were fabricated using a layer-by-layer adsorption process based on the spontaneous self-assembly of alternating layers of cationic and anionic polymers on a silanized ITO patterned glass substrate. The substrate is dipped successively into dilute solutions of a polyanion and a polycation. The homopolymers and copoymers of diallyldimethylammonium chloride (DDA), allylamine hydrochloride (AA), 2-[(methacryloyloxy)ethyl]trimethyl ammonium chloride (METAC) and vinylbenzyl tributyl phosphonium chloride(VTBPC) were used as the polycations. In this experiment, it was found that the resistance varied according to the chemical structure of the polycation. The resistance varied from $10^7$ to $10^5$ $\Omega$, as the humidity was increased from 60 (relative humidity) to $95\%$RH, which is the range of RH values required for a dew sensor operating at high humidity.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.262-262
• /
• 2010

We introduce a novel and efficient strategy for producing free-standing functional films via photo-crosslinking and electrostatic layer-by-layer (LbL) assembly, which can allow the buildup of hydrophilic multilayers onto hydrophobic surfaces. Hydrophobic multilayers were deposited on ionic substrates by a photo-crosslinking LbL process using photo-crosslinkable polymers. The photo-crosslinked surface was converted to an anionic surface by excess UV light irradiation. This treatment allowed also the stable adhesion between metal electrode or cationic polyelectrolyte and hydrophobic multilayers. After dissolving the ionic substrates in water, the formed free-standing films exhibited unique functionalities of inserted components within hydrophobic and/or hydrophilic multilayers.

• 한국재료학회지
• /
• 제17권1호
• /
• pp.31-36
• /
• 2007

Nanoimprint lithography (NIL) is a new lithographic method that offers a sub-10nm feature size, high throughput, and low cost. One of the most serious problems of NIL is the stiction between mold and resist. The antistiction layer coating is very effective to prevent this stiction and ensure the successful NIL results. In this paper, an antistiction layer was deposited by VSAM (vapor self assembly monolayer) method on silicon samples with FOTS (perfluoroctyltrichlorosilane) as a precursor for making an antistiction layer. A specially designed LPCVD (low pressure chemical vapor deposition) was used for this experiment. All experiments were achieved after removing the humidity. First, the evaporation test of FOTS was performed for checking the evaporation temperature at low pressure. FOTS was evaporated at 5 Tow and $110^{\circ}C$. In order to evaluate the temperature effect on antistiction layer, chamber temperature was changed from 50 to $170^{\circ}C$ with 0.1ml of FOTS for 1 minute. Good hydrophobicity of all samples was shown at about $110^{\circ}$ of contact angle and under $20^{\circ}$ of hysteresis. The surface energies of all samples calculated by Lewis acid/base theory was shown to be about 15mN/m. The deposited thicknesses of all samples measured by ellipsometry were almost 1nm that was similar value of the calculated molecular length. The surface roughness of all samples was not changed after deposition but the friction force showed relatively high values and deviations deposited at under $110^{\circ}$. Also the white circles were founded in LFM images under $110^{\circ}$. High friction forces were guessed based on this irregular deposition. The optimized VSAM process for FOTS was achieved at $170^{\circ}C$, 5 Torr for 1 hour. The hot embossing process with 4 inch Si mold was successfully achieved after VSAM deposition.

• 펄프종이기술
• /
• 제43권3호
• /
• pp.35-42
• /
• 2011

In this study, ground calcium carbonate (GCC) was modified by Layer-by-Layer (LbL) multilayering with polyelectrolytes. Cationic polyacrylamide (C-PAM) and poly sodium 4-styrene sulfonate (PSS) were used as cationic and anionic polyelectrolytes to modify GCC. The characteristics of the modified GCC were examined in terms of zeta potential and particle size with the addition level of polyelectrolyte and layer number. The GCC could form an assembly of cationic and anionic polyelectrolytes through consecutive adsorption process. The zeta potential of the modified GCC moved toward the cationicity and reached the plateau with the increase of the addition level of C-PAM. With layering of anionic PSS, the GCC had the negative charge. The particle size was dependent on the zeta potential. It was also observed by optical microscope. As the PSS was in the presence of the outermost layer, the GCC showed the better dispersability. It indicated that the surface charge and particle size can be controlled by adjusting the addition level of polyelectrolyte and the layer number.