• 한국독성학회:학술대회논문집
• /
• 한국독성학회 2002년도 국제심포지움
• /
• pp.59-72
• /
• 2002

The anticarcinogenic effects of epicatechin(EC) and ginsenoside Rb2(Rb2), which are major components of green tea and Korea ginsen, respectively, were investigated using a model system of gap junctional intercellular communication (GJIC) in WB-F344 rat liver epithelial cells. 12-O-Tetradecanoylphorbol-13-accetate (TPA) and hydrogen preoxide, known as cancer promoters, inhibited GJIC in the epithelial cells as determined by the scrape loading/dye transfer assay, fluorescence redistribution assay after photobleaching, and immunofluorescent staining of connexin 43 using a laser confocal microscope. The inhibition of GJIC by TPA and H2O2 was prevented with treatment of Rb2 or Ec. The effect of EC on GJIC was stronger in TPA-treated cells than in H2O2-treated cells, while the effect of Rb2 was opoosite to that of EC. EC, at the concentration of 27.8$\mu$g/ml, prevented the TPA-induced GJIC inhibition by about 60%. Rb2, at the concentration of 277$\mu$g/ml, recovered the H2O2-induced GJIC inhibition by about 60%. These results suggest that Rb2 and EC may prevent human cancers by preventing the down-regulation of GJIC during the cancer promotion phase and that the anticancer effect of green tea and Korea ginseng may come from the major respective conponents, EC and Rb2.

• 생명과학회지
• /
• 제20권9호
• /
• pp.1324-1331
• /
• 2010

Mifepristone (MIF)와 Tamoxifen (TAM)은 각각 전립선암과 유방암치료제로 오랫동안 사용되고 있다. MIF는 안드로겐수용체(AR) 양성인 세포와 음성이 세포 모두에서 세포사멸을 유도하며, TAM 은, 리간드-수용체작용 기작의 다양한 특성에 의하여 에스트로겐(ER) 양성인 세포뿐 만 아니라 다른 종류의 암세포에서도 세포사멸을 유도하는 것으로 알려져 있다. 본 연구에서는 AR 음성인 DU-145 전립선암세포에 있어서, MIF와 TAM의 세포독성이 세포 내 칼슘농도 변화에 기인된 세포사멸기작에 의한 것임을 보여준다. MIF와 TAM을 처리시 세포성장은 농도와 시간의존적으로 감소하였으며, confocal laser scanning microscopy (CLSM)과 fluorescence-activated cell sorting (FASC)로 세포를 분석한 결과 각각 MIF와 TAM을 2일간 처리한 세포에서 세포사멸이 진행되는 것을 관찰하였다. 세포독성효과를 비교했을 경우, TAM이 MIF 보다 강하게 작용하였다. MIF와 TAM을 처리한 세포 내 칼슘변화 측정 시, 칼슘농도 또한 처리 약물의 농도와 시간 의존적으로 증가하였다. 1.5 mM 칼슘배지와 칼슘제거된 배지에서의 실험결과를 비교한 바, 세포 내 칼슘증가는 외부로부터의 유입에 의한 것으로 생각된다. 세포독성효과와 마찬가지로 칼슘증대 효과 역시 TAM에서 뚜렷하게 나타났다. 수용체 매개 세포사멸기작의 초기에 관여하는 procaspase-8은 MIF 처리 시 뚜렷이 활성화 되었으나, TAM의 경우 활성화가 MIF의 경우에 비해 강하지 못하였다. 그러나, 세포사멸의 중추적인 역할을 하는 caspase-3은 TAM 을 처리한 세포에 있어서 활성 정도가 훨씬 높았다. 세포사멸과정의 중요한 조절 단백질인 Bcl-2 그룹단백질의 발현을 조사해 본 결과, 세포사멸 억제단백질인 Bcl-2의 발현은 MIF, TAM 처리 시 동일하게 감소한 반면, 촉진단백질인 Bax의 발현은 2-3배 가량 증대되었다. 이상의 결과로 보아 MIF와 TAM은 세포 내 칼슘조절을 통하여 세포사멸을 유도하나, 세포사멸의 초기단계는 MIF와 TAM이 서로 다른 경로를 경유할 가능성이 있는 것으로 생각된다.

• Tuberculosis and Respiratory Diseases
• /
• 제56권2호
• /
• pp.178-186
• /
• 2004

연구배경 : 광역학치료는 체내의 풍부한 산소, 외부에서 공급되는 레이저 그리고 레이저 빛에 예민한 반응을 보이는 광감작제를 이용한 새로운 항암치료 방법으로, 그 원리는 체내의 산소와 빛에 예민한 반응을 보이는 광감작제가 레이저에 의하여 화학적인반응을 일으켜 생성되는 단일항 산소와 이에 의하여 유발되는 자유라디칼이 암세포를 손상시키는 것이다. 광역학치료에 의한 세포사의 주요 형태로 아포프토시스가 관여한다고 알려져 있다. 이에 저자들은 A549 폐암세포주에서의 광역학치료에서 세포독성이 광감작제의 농도, 레이저 조사량, 그리고 시간의 경과에 따라서 어떠한 양상으로 나타나는지 그리고 세포사의 특징으로 아포프토시스 유무에 대해서 알아보고자 본 연구를 시행하였다. 방 법 : 폐암세포주로 A549 폐암세포주를 이용하였고, 광감작제로 ALA를, 그리고 레이저는 632nm diode 레이저를 사용하였다. ALA 의 용량은 $10{\mu}g/m{\ell}$, $100{\mu}g/m{\ell}$, 그리고 $1mg/m{\ell}$를 사용하였고 레이저의 조사량은 1.6, 3.2, $6.4J/cm^2$ 이었다. 세포독성검사는 crystal violet assay를 이용하였고 아포프토시스 유무는 Hoechst 33342 와 propium iodide 이중염색 방법을 이용하여 분석하였다. 결 과 : A549 폐암세포주에서 ALA를 이용한 광역학치료시 ALA의 농도증가에 따른 세포독성의 증가가 관찰되었고 또한 레이저의 조사량 증가에 따라서도 세포독성의 증가가 관찰되었다. 그리고 세포독성의 형태는 아포프토시스임을 확인할 수 있었다. 그러나 광역학치료 후 시간의 경과에 따른 세포독성의 변화는 관찰되지 않았다. 결 론 : ALA를 이용한 광역학치료는 A549 폐암세포주의 항암효과가 있음을 알 수 있었으며 이는 아포프토 시스의 유도에 의해 이루어짐을 확인할 수 있었다. 향후 광역학치료-유도성 아포프토시스의 기전에 대한 연구가 필요할 것으로 사료된다.

• International Journal of Automotive Technology
• /
• 제7권5호
• /
• pp.585-593
• /
• 2006

The effect of the shape of the side wall on vaporization and fuel mixture were investigated for the impinging spray of a direct injection(DI) gasoline engine under a variety of conditions using the LIEF technique. The characteristics of the impinging spray were investigated under various configurations of piston cavities. To simulate the effect of piston cavity configurations and injection timing in an actual DI gasoline engine, the parameters were horizontal distance from the spray axis to side wall and vertical distance from nozzle tip to impingement plate. Prior to investigating the side wall effect, experiments on free and impinging sprays for flat plates were conducted and these results were compared with those of the side wall impinging spray. For each condition, the impingement plate was located at three different vertical distances(Z=46.7, 58.4, and 70 mm) below the injector tip and the rectangular side wall was installed at three different radial distances(R=15, 20, and 25 mm) from the spray axis. Radial propagation velocity from spray axis along impinging plate became higher with increasing ambient temperature. When the ambient pressure was increased, propagation speed reduced. High ambient pressures tended to prevent the impinging spray from the propagating radially and kept the fuel concentration higher near the spray axis. Regardless of ambient pressure and temperature fully developed vortices were generated near the side wall with nearly identical distributions, however there were discrepancies in the early development process. A relationship between the impingement distance(Z) and the distance from the side wall to the spray axis(R) was demonstrated in this study when R=20 and 25 mm and Z=46.7 and 58.4 mm. Fuel recirculation was achieved by adequate side wall distance. Fuel mixture stratification, an adequate piston cavity with a shorter impingement distance from the injector tip to the piston head should be required in the central direct injection system.

• Bulletin of the Korean Chemical Society
• /
• 제35권3호
• /
• pp.839-844
• /
• 2014

The gas-phase radical-radical reaction $O(^3P)$ + $C_2H_5$ (ethyl) ${\rightarrow}$ $H(^2S)$ + $CH_3CHO$(acetaldehyde) was investigated by applying a combination of vacuum-ultraviolet laser-induced fluorescence spectroscopy in a crossed beam configuration and ab initio calculations. The two radical reactants $O(^3P)$ and $C_2H_5$ were respectively produced by photolysis of $NO_2$ and supersonic flash pyrolysis of the synthesized precursor azoethane. Doppler profile analysis of the nascent H-atom products in the Lyman-${\alpha}$ region revealed that the average translational energy of the products and the average fraction of the total available energy released as translational energy were $5.01{\pm}0.72kcalmol^{-1}$ and 6.1%, respectively. The empirical data combined with CBS-QB3 level ab initio theory and statistical calculations demonstrated that the title exchange reaction is a major channel and proceeds via an addition-elimination mechanism through the formation of a short-lived, dynamical addition complex on the doublet potential energy surface. On the basis of systematic comparison with several exchange reactions of hydrocarbon radicals, the observed small kinetic energy release can be explained in terms of the loose transition state with a product-like geometry and a small reverse activation barrier along the reaction coordinate.

• Bulletin of the Korean Chemical Society
• /
• 제32권2호
• /
• pp.510-514
• /
• 2011

Photodissociation dynamics of allyl alcohol ($H_2C$=CH-$CH_2OH$) has been investigated at 205 - 213 nm along the UV absorption band by measuring rotationally-resolved laser-induced fluorescence spectra of OH radicals. Observed energy partitioning of the available energy among products at all photon energies investigated was similar and the barrier energy for OH production is about 574.7 kJ/mol from the OH yield measurements. The potential energy surfaces for the $S_0$, $T_1$, and $S_1$ excited states along the dissociation coordinate were obtained by ab initio quantum chemical calculations. The observed energy partitioning was successfully modeled by the "barrier-impulsive model" with the reverse barrier and the geometry obtained by the calculated potential energy surfaces. The dissociation takes place on the $T_1$ excited state potential energy surface with an energy barrier in the exit channel and a large portion of the photon energy is distributed in the internal degrees of freedom of the polyatomic products.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.463-467
• /
• 2004

Rosette-type diffusers with four-ports per riser are constructed in relatively shallow water in Korea. However, the trajectorial bending phenomena due to lower-pressure inside the surrounded buoyant jets on the riser was not considered in most models and was not observed without any experimental results. The buoyant jet behavior affected by the bending effect where there have been growing interests need to be verified experimentally and need to be preceded in the analysis of the characteristics of the buoyant jets oil a riser. The hydraulic model experiments have been carried out to investigate the characteristics of the behavior of horizontal buoyant jets discharged from a Rosette-type riser with four ports as well as single port over a certain range of the experimental conditions including initial momentum and initial buoyancy using LIF (Laser Induced Fluorescence) system to obtain concentration fields. The intensity of the fluorescent light in each pixel on the images obtained from LIF system with the tracer of Rhodamine H was converted to the local dye concentration with a set of calibration procedures to account for the non-uniform distribution of light intensity and the attenuation of light energy by water medium. The experimental results shows that the trajectories from Your ports tend to bend more and more to the inner side with the increase of the densimetric Froude number while the buoyant jet from a single port rises up without any bending phenomena. The previous models, VISJET and Seo et al. (2002), do not simulate the trajectories well except the region before the bending section. This study will focus on the analysis of the behavior of the buoyant jets for mainly a Rosette-type riser by conducting hydraulic model experiments using LIF system.

• 대한기계학회논문집B
• /
• 제29권3호
• /
• pp.390-401
• /
• 2005

In this study, extinction limit extension of unsteady $(CH_{4}+N_{2})$/air diffusion flames was investigated experimentally. A spatially locked flame in an opposing jet burner was perturbed by linear velocity variation, and time-dependent flame luminosity, transient maximum flame temperature and OH radical were measured over time with the high speed camera, Rayleigh scattering method and OH laser-induced fluorescence, respectively. Unsteady flames survive at strain rates that are much higher than the extinction limit of steady flames, and unsteady extinction limits extend as the slope of the strain rate increases or the initial strain rate decreases. We verified the validity of the equivalent strain rate concept by comparing the course of unsteady extinction process and steady extinction process, and it was found that the equivalent strain rate concept represents well the unsteady effect of a convective-diffusive zone. To investigate the reason of the unsteady extinction limit extension, we subtracted the time lag of the convective-diffusive zone by using the equivalent strain concept. Then the modified unsteady extinction limits become smaller than the original unsteady extinction limits, however, the modified unsteady extinction limits are still larger than the steady extinction limits. These results suggest that there exist the unsteady behavior of a diffusive-reactive zone near the extinction limit due to the chemical non-equilibrium states associated with unsteady flames.

• 설비공학논문집
• /
• 제27권12호
• /
• pp.609-619
• /
• 2015

A preprocessing scheme utilizing multi-division of the ROI (region of interest) in a chemiluminescence image during inversion is proposed. The resulting inverted image shows the flame's structure, which can be useful for studying combustion instability. The flame structure is often quantitatively visualized with PLIF (planar laser-induced fluorescence) images as well. The chemiluminescence image, which is a line-integral of the flame, needs to be preprocessed before inversion, mainly due to the inherent noise and the assumption of axisymmetry during the inversion. The feasibility of the multi-division preprocessing technique has been tested with experimentally-obtained OH PLIF and $OH^*$ chemiluminescence images of jet and swirl-stabilized flames burning substitute natural gas (SNG). It turns out that the technique outperforms two conventional methods, specifically, the technique without preprocessing and the one with uni-division, reconstructing the SNG flame structures much better than its two counterparts when compared using corresponding OH PLIF images. The characteristics of the optimum degree of polynomials to be applied for curve-fitting of the flame region data for the multi-division method involving two flames has also been investigated.

• Bulletin of the Korean Chemical Society
• /
• 제30권2호
• /
• pp.429-434
• /
• 2009

The OH($X^2{\Pi},\;{\nu}$"=0, 1) internal state distributions from the reaction of electronically ground state oxygen atoms with HSi$Cl_3$ were measured using laser-induced fluorescence. The ground-state O$(^3P_J)$ atoms with kinetic energies above the reaction barrier were produced by photolysis of N$O_2$ at 355 nm. The OH product revealed strong vibrational population inversion, P(${\nu}$"=1)/P(${\nu}$"=0) = 4.0 ${\pm}$ 0.6, and rotational distributions in both vibrational states exhibit substantial rotational excitations to the limit of total available energy. However, no preferential populations in either of the two $\Lambda$ doublet states were observed from the micropopulations, which supports a mechanism involving a direct abstraction of hydrogen by the atomic oxygen. It was also found that the collision energy between O and HSi$Cl_3$ is effectively coupled into the excitation of the internal degrees of freedom of the OH product ($$ = 0.62, and $<\;f_{rot}>$ = 0.20). The dynamics appear consistent with expectations for the kinematically constrained reaction which supports the reaction type, heavy + light-heavy $\rightarrow$ heavy-light + heavy (H + LH′ $\rightarrow$ HL + H′). The dynamics of oxygen atom collision with HSi$Cl_3$ are discussed in comparison to those with Si$H_4$.