• 한국인터넷방송통신학회논문지
• /
• 제22권2호
• /
• pp.43-50
• /
• 2022

본 논문에서는 밀리미터파 W대역에서 동작하는 안테나 성능 측정을 위한 원-전계 측정 시스템을 설계하고 검증하였다. 안테나 성능 시험은 안테나의 종류, 측정 항목, 측정 환경 및 기간 등에 따라 측정 시스템을 선택해야 한다. 근접 전계 측정은 안테나가 다중 채널을 가지거나 다양한 빔을 가지고 있을 경우, 측정 항목이 증가하기 때문에 많은 시간이 소요된다. 이러한 안테나는 원-전계 측정을 통해 측정 시간을 단축 할 수 있고 필요한 측정 항목만 측정이 가능하다. 따라서 본 연구는 원-전계 측정 시스템을 고출력 레이저를 이용하여 정밀한 정렬을 확보하고 이중 증폭기 시스템을 적용하여 측정 정확도를 향상하였다. 설계된 시스템은 무반향 챔버 내 구축하였으며 검증된 근접 전계 측정 시스템과 비교하여 검증하였다.

• 터널과지하공간
• /
• 제32권4호
• /
• pp.272-284
• /
• 2022

본 연구에서는 개발 중인 전단농화유체(shear thickening fluid) 기반의 발파전색재료와 밀폐 플러그 장치의 효과를 평가하기 위하여 터널발파를 수행하였다. SAV-Cut공법을 적용하고 있는 터널현장에 STF 단일전색 및 STF 전색재를 플러그와 결합하여 적용하였고, 기존 방식의 모래전색을 적용한 케이스와 굴진율 및 파쇄입도를 비교하였다. 터널 굴진율은 3차원 레이저 스캐너를 이용하여 평가하였다. STF 전색재료와 STF 전색재료에 플러그를 결합한 경우 모래전색 대비 각 5.7, 5.36% 정도 굴진율이 향상되는 것을 확인하였다. 파쇄입도의 경우 STF 전색재료를 적용하였을 경우 가장 좋게 나타났으며, 모래 전색케이스와 비교하였을 때 약 61% 파쇄입도가 감소하였다. 그러나 플러그 장치적용에 따른 뚜렷한 발파 효과 향상은 관찰되지 않았다.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1549-1559
• /
• 2022

As an accident tolerant fuel (ATF) concept, oxide dispersion strengthened Zircaloy-4 (ODS Zry-4) cladding has been developed to enhance the mechanical properties of cladding using laser processing technology. In this study, a simulation technique was established to investigate the mechanical properties and effects of Y₂O₃ particles for the ODS Zry-4. A 3D representative volume element (RVE) model was developed considering the parameters of the size, shape, distribution and volume fraction (VF) of the Y₂O₃ particles. From the 3D RVE model, the Young's modulus, coefficient of thermal expansion (CTE) and creep strain rate of the ODS Zry-4 were effectively calculated. It was observed that the VF of Y₂O₃ particles had a significant effect on the aforementioned mechanical properties. In addition, the predicted properties of ODS Zry-4 were applied to a simulation model to investigate cladding deformation under a transient condition. The ODS Zry-4 cladding showed better performance, such as a delay in large deformation compared to Zry-4 cladding, which was also found experimentally. Accordingly, it is expected that the simulation approach developed here can be efficiently employed to predict more properties and to provide useful information with which to improve ODS Zry-4.

• 대한조선학회논문집
• /
• 제59권1호
• /
• pp.18-28
• /
• 2022

The turbulence stimulation effect of studs for boundary layer over a flat plate was investigated through the flow measurement in KRISO cavitation tunnel. For the test, Laser Doppler Velocimetry (LDV) and three flat plate models were used: (1) flat plate without studs; (2) flat plate with one stud row; (3) flat plate with two stud rows. The dimension and location of stud rows and the inflow speed were selected considering test conditions for standard-sized model ships in KRISO towing tank. The boundary layer characteristics of test models were analyzed and compared in terms of mean velocity profiles, turbulence intensity profiles, boundary layer thickness, and shape factor. In the case of the flat plate without studs, transition from laminar to turbulent flow occurred around Re_x=3.83 ~ 5.19 × 10⁵. In the case of flat plates with stud rows, the flow rapidly changed into turbulent flow right after passing the first stud row. In the state where turbulence was already developed, the second stud row slightly increased the turbulence intensity near the top of the stud, but did not significantly affect the boundary layer characteristics such as mean velocity distribution, boundary layer thickness, and shape factor.

• The Journal of Advanced Prosthodontics
• /
• 제14권5호
• /
• pp.305-314
• /
• 2022

PURPOSE. The aim of this study was to evaluate the flexural strength of a 3D-printed denture base resin (Cosmos Denture), after different immediate repair techniques with surface treatments and thermocycling. MATERIALS AND METHODS. Rectangular 3D-printed denture base resin (Cosmos Denture) specimens (N = 130) were thermocycled (5,000 cycles, 5℃ and 55℃) before and after the different repair techniques (n = 10 per group) using an autopolymerized acrylic resin (Jet, J) or a hard relining resin (Soft Confort, SC), and different surface treatments: Jet resin monomer for 180 s (MMA), blasting with aluminum oxide (JAT) or erbium: yttrium-aluminum-garnet laser (L). The control group were intact specimens. A three-point flexural strength test was performed, and data (MPa) were analyzed by ANOVA and Games-Howell post hoc test (α = 0.05). Each failure was observed and classified through stereomicroscope images and the surface treatments were viewed by scanning electron microscope (SEM). RESULTS. Control group showed the highest mean of flexural strength, statistically different from the other groups (P < .001), followed by MMA+J group. The groups with L treatment were statistically similar to the MMA groups (P > .05). The JAT+J group was better than the SC and JAT+SC groups (P < .05), but similar to the other groups (P > .05). Adhesive failures were most observed in JAT groups, especially when repaired with SC. The SEM images showed surface changes for all treatments, except JAT alone. CONCLUSION. Denture bases fabricated with 3D-printed resin should be preferably repaired with MMA+J. SC and JAT+SC showed the worst results. Blasting impaired the adhesion of the SC resin.

• Medical Lasers
• /
• 제10권2호
• /
• pp.96-105
• /
• 2021

Background and Objectives Skin aging is reportedly associated with regulation in collagen and elastin synthesis. This study investigated the potential of combining light-emitting diode (LED) treatments using a 630-nm and 850-nm LED with simultaneous microcurrent application. Materials and Methods The dorsal skin of female pigs was treated with a home-use device. We examined the treatment effects using photography, thermocamera, microscopic pathology, and histological examination to determine the mechanism of action, efficacy, and safety of the procedure. A histological observation was performed using hematoxylin and eosin, Masson's trichrome, Victoria blue, and immunohistochemical staining. We also used the Sircol soluble collagen and elastin assay kit to measure the amounts of collagen and elastin in the porcine back skin tissue after 2 and 6 weeks. Results Evaluation by visual inspection and devices showed no skin damage or heat-induced injury at the treatment site. Histological staining revealed that accurate treatment of the targeted dermis layer effectively enhanced collagen and elastin deposition. Collagen type I, a protein defined by immunohistochemical staining, was overexpressed in the early stages of weeks 2 and 6. Combined therapy findings showed the superior capability of the 630-nm and 850-nm LED procedures to induce collagen; in contrast, elastin induction was more pronounced after microcurrent treatments. Conclusion The home-use LED device, comprising a combination of 630-nm and 850-nm LEDs and microcurrent, is safe and can be used as an adjunctive treatment for self-administered facial rejuvenation.

• Medical Lasers
• /
• 제10권4호
• /
• pp.220-228
• /
• 2021

Background and Objectives In designing a resistance exercise program, intensity, rest, and exercise volume are important. Many studies have been conducted to find the most suitable resistance exercise program incorporating the above, and in particular, many prior studies have been conducted on intensity. This study attempted to determine the effective volume of exercise by analyzing the number of repetitions performed at intensities of 65% one-repetition maximum (1RM) and 75% 1RM during the bench press exercise, and the electromyography (EMG) response of the agonist muscle. Materials and Methods Eight males in their 20s were selected as study subjects and they performed five sets of bench presses at two levels of intensity (65% 1RM, 75% 1RM). The following results were obtained by measuring the number of repetitions and the EMG response according to the exercise intensity and sets during the workout. Results First, the number of repetitions showed a sharp drop from the first set to the third set at 65% 1RM intensity and showed no change in the fourth and fifth sets. At 75% 1RM intensity, the intensity of hypertrophy showed a gradual decrease from the first set to the fifth set. Second, at 75% 1RM exercise intensity, the pectoralis major, anterior deltoid and triceps brachii showed high muscle activity, and the activity of the anterior deltoid continued to increase from the first set to the fourth set at 65% 1RM intensity, and from the first set to the fifth set at 75% 1RM. Conclusion It was found that during the bench press exercise, three minutes of rest at 75% 1RM intensity, five sets of five sets, one minute rest at 65% 1RM intensity, and three sets of the exercise were effective.

• Medical Lasers
• /
• 제10권1호
• /
• pp.22-30
• /
• 2021

Background and Objectives Ocular alkali burns cause severe damage to the ocular tissues and vision loss. Solcoseryl is a standardized calf blood extract that normalizes the metabolic disturbance and aids in maintaining the chemical and hormonal balance and has been used to treat burns in various tissues. This study examined the effects of Solcoseryl on a rat corneal alkali burn model. Materials and Methods Twenty rats were assigned randomly to four equal groups, including alkali burn, hyaluronic acid, Solcoseryl eyedrop, and Solcoseryl gel. A corneal alkali burn was induced by a NaOH-soaked paper disc. The treatments were given twice a day, every day. The wound area was measured after 24 and 48 hours, and the degree of neovascularization and corneal opacity were scored every week. The rats were sacrificed after three weeks for immunohistochemistry (IHC) to compare the level of inflammatory cytokines, IL-1β, IL-6, and TNF-α. The thickness of the retinal layers was compared to observe any changes in the retina. Results The use of Solcoseryl on corneal alkali burn accelerated wound healing with less neovascularization, greater opacity, and less cataract. IHC showed that the inflammation of the cornea was controlled by both the hyaluronic acid and Solcoseryl treatments. On the other hand, the inflammation had spread to the retina. When the dosage forms were compared, eyedrops were more effective on corneal inflammation, while the gel-type had a greater effect on retinal inflammation. Conclusion Solcoseryl was effective in accelerating the wound healing rate on a corneal alkali burn but could not prevent the spread of inflammation from the cornea to the retina. Eyedrops were more effective on inflammation in the cornea, and the gel was more effective in the retina.

• Medical Lasers
• /
• 제9권1호
• /
• pp.39-43
• /
• 2020

Background and Objectives Breast reconstruction has the advantage of reducing the loss of the body image of patients after mastectomy surgery, and also improving the quality of the social and sexual life of breast cancer patients. However, in surprising and unfortunate number of patients, acute postoperative pain persists beyond the normal course of postsurgical recovery. We set out to investigate the effect of local dynamical micro-massage (LDM) treatment for achieving pain relief and reducing other postoperative complications. Materials and Methods We performed a retrospective analysis on 58 patients who underwent LDM treatment for postoperative pain management at Soonchunhyang University Bucheon Hospital between February 2017 and June 2019. Those patients who complained of persistent postoperative pain, which was uncontrollable with medication, were treated with LDM. The degree of pain and discomfort with contracture were recorded using numerical rating scale (NRS) scoring system with numbers from 0 to 10 ('none' to 'worst'). Results The median NRS score of pain was reduced by 62.3% from the start to the end of LDM treatment (p<0.001). Further, the NRS score of discomfort with contracture was reduced 66.0% (p<0.001). There was no complication related to the LDM treatment. Conclusion Dual-frequency ultrasound LDM can be an effective therapeutic option for persisting pain after breast reconstruction surgery. It was also effective in improvement of discomfort with contracture and erythema of the surgical wound.

• 한국산학기술학회논문지
• /
• 제22권5호
• /
• pp.199-206
• /
• 2021

본 논문은 잠수함 공격잠망경(Attack periscope) 보호를 위한 보호구조물 설치 타당성 및 신뢰성 검증 방안에 대해 서술하고 있다. 공격잠망경은 잠망경 심도 및 수상 항해 시 대수상 및 대공 표적을 은밀하게 시각적으로 확인하기 위한 핵심 탑재 장비이다. 관측장치 및 거리측정장치를 통해 획득된 표적 정보를 전투체계에 제공하며, 대수상 및 대공탐색하여 자함의 위협 수준 판단과 표적의 영상, 거리를 포함한 위치 정보를 제공한다. OOO급 잠수함 성능개량 시 공격 잠망경을 신규 장비로 교체함에 따라 마스트 길이가 증가하였고, 증가된 마스트 길이만큼 외부로 노출됨에 따라 항해 시 어망, 그물과 같은 해상 부유물에 의한 장비 손상 발생 가능성이 커졌다. 따라서 함교에 공격잠망경 보호구조물을 설치하여 장비 운용성능을 향상시켰으며, CFD 해석 및 실제 해상에서의 수중방사소음 측정을 통해 보호구조물 설치 타당성 및 신뢰성 검증을 수행하였다. 본 연구를 통하여 향후 공격잠망경 신규 장비 교체 시 건전성 확보를 위한 참고자료로 활용될 수 있을 것으로 기대된다.