• 소음진동
• /
• 제10권5호
• /
• pp.800-805
• /
• 2000

To determine the modal matrix and modal frequency of engine mount system, we most solve so-called eigen-value problem. However eigen-value problem of engine mount system with hydraulic mount can not be solved by general eigne-analysis algorithm because the properties of hydraulic mount vary with frequency. so in this paper the method for modal analysis of rigid body motions of an engine supported by hydraulic mount is proposed. Natural frequencies and mode shapes of this nonlinear system are obtained by using complex exponential method and Laplace transformation method. In time domain, impulse response functions are calculated by (two-sided) discrete inverse Fourier Transformation of forced frequency response functions achieved by Laplace transformation of the differential equation of motion. Considering the fact that frequency response functions synthesized by modal parameters form proposed method are in good agreement with original FRFs, it is proved that the proposed method is very efficient and useful for the analysis of eigne-value problem of hydraulic engine mount system.

• Communications for Statistical Applications and Methods
• /
• 제15권5호
• /
• pp.775-781
• /
• 2008

It is developed that a family of the semicircular Laplace distributions for modeling semicircular data by simple projection method. Mathematically it is simple to simulate observations from a semicircular Laplace distribution. We extend it to the l-axial Laplace distribution by a simple transformation for modeling any arc of arbitrary length. Similarly we develop the l-axial log-Laplace distribution based on the log-Laplace distribution. A bivariate version of l-axial Laplace distribution is also developed.

• 대한기계학회논문집
• /
• 제16권5호
• /
• pp.883-890
• /
• 1992

본 연구에서는 Laplace 변환법에 의한 2차원 동적 문제의 경계요소 프로그램 을 작성하고, 간단한 모델을 해석하여 프로르램의 정도 및 그 유용성을 검토하고, 응 용문제로 동적하중을 받는 균열문제의 몇 가지 모델에 대하여 변위 외삽법으로 균열의 파괴 역학적 파라미터인 동적응력확대계수(dynamic stress intensity factor)를 구하 여 결과를 검토하여 보고자 한다.

• 한국토양비료학회지
• /
• 제28권3호
• /
• pp.233-240
• /
• 1995

Ficks의 확산 편미방을 Laplace 변환을 적용하여 초기 및 경계조건과 함께 종속 대수 함수로 변환하고 Burington의 역변환표를 활용하여 복귀하는 방법으로 Ficks의 확산 편미방의 해를 구하였다. 적용된 초기 및 정계조건은 일정깊이의 담수에로 무한 깊이의 일정 염농도의 균일한 간척지 토양에서 상향 염분확산 이동에 대한 것이었다. 유도된 해는 특이 조건에서의 비교법으로 오.등 및 Kirkham, 등이 보고 한 간단한 초기 빛 경계조건에서의 해와 일치함을 확인했다. Ficks의 확산식의 해로 계산된 완만한 제염 속도를 근거로하여 담수 제염 방법별 제염 속도와 토양중 염분분포를 추정할수있는 모형식을 제시하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제13권4호
• /
• pp.458-467
• /
• 2012

In this study, the linear viscoelastic response of a rectangular laminated plate is investigated. The viscoelastic properties, expressed by two basic spring-dashpot models, that is Kelvin and Maxwell models, is assumed in the range to investigate the influence of viscoelastic coefficients to mechanical behavior. In the present study, viscoelastic responses are performed for two popular equivalent single-layered theories, such as the first-order shear deformation theory (FSDT) and third-order shear deformation theory (TSDT). Compliance and relaxation modulus of time-dependent viscoelastic behavior are approximately determined by Prony series. The constitutive equation for linear viscoelastic material as the Boltzmann superposition integral equation is simplified by the convolution theorem of Laplace transformation to avoid direct time integration as well as to improve both accuracy and computational efficiency. The viscoelastic responses of composite laminates in the real time domain are obtained by applying the inverse Laplace transformation. The numerical results of viscoelastic phenomena such as creep, cyclic creep and recovery creep are presented.

• 대한기계학회논문집
• /
• 제15권2호
• /
• pp.396-403
• /
• 1991

A solution is presented for the computation of the elastic-creep stresses in a hollow cylinder subjected to nonaxisymmetric temperature distribution. The creep problem is treated by the Maxwell creep model. Laplace transformation is used for reformation of the governing equation of elastic problem and Hooke's law in a function of .gamma. , .theta. , and creep constant. The governing equation is set up using the Airy stress function which leads to the biharmonic equation. The solution is obtained by using Fourer series method and Laplace inverse method used to obtain the stress components which include the variation of time. This solution shows excellent agreement with Lamkin's and Boley & Weiner's solution. The viscoelastic stresses are also obtained for the fuel rob tube subjecting nonaxisymmetric thermal load.

• East Asian mathematical journal
• /
• 제6권1호
• /
• pp.45-62
• /
• 1990

• 대한토목학회논문집
• /
• 제39권1호
• /
• pp.219-225
• /
• 2019

겨울철 발생하는 아스팔트 혼합물의 저온균열의 정량적 분석 및 평가를 위해서는 해당 아스팔트 혼합물의 저온응력이 반드시 계산되어야 하며, 이는 현재 대한민국, 미국 북부 및 캐나다 지역에서 포장 유지관리, 설계에 있어서 매우 중요한 사항 중 하나이다. 일반적으로 아스팔트 혼합물의 저온응력은 크리프 시험과 시간중첩이론을 바탕으로 계산되며 전통적으로 두 수학적 단계를 통해 계산된다. 우선 수학적, 수치적 변환과정(홉킨스-해밍 알고리즘)을 통해 크리프-강성응력에서 이완응력이 계산된다. 다음으로 이완응력 지배곡선을 구현한 후 회선적분의 수치해석적 접근을 통해 아스팔트 혼합물의 저온응력이 최종적으로 계산된다. 상기의 과정은 복잡하며, 시간이 오래 걸리는 단점이 있다. 이번 논문에서는 보다 간편한 라플라스 변환을 통해 해당 아스팔트 혼합물의 저온응력을 계산하였으며, 이의 결과를 전통적 계산 기법과 비교, 분석하였다. 결론적으로 새로이 제안된 라플라스 변환 기법은 보다 아스팔트 혼합물의 저온응력을 효과적, 효율적으로 계산할 수 있음이 발견되었다.

• 대한조선학회지
• /
• 제13권3호
• /
• pp.11-19
• /
• 1976

Grillages are abundant in ship structures and in many other types of structures such as bridges and building floors. Clarkson has shown that plated grillages can be satisfactorily analyzed as gridworks if an appropriate effective breadth is taken into account. Also, it has previously been pointed out, by Nielsen, that grillage calculations could be simplified by use of the Laplace transformation. In this paper, it is assumed that the torsional rigidity of the members and axial load are negligible, also that girders have the same scantling and spacing each other and so stiffeners do. Then the grillages composed of both-end-fixed girders and both-end-hinged stiffeners, which are subjected only to uniform normal loads are investigated. The calculus of variation is used to set up the differential equations and the Laplace transformation is applied to solve the differential equations. The program has been tested by FACOM 28 and the results show good agreements with those by the STRESS, which was developed in M.I.T.. The amount of the data input and computing time are much less than those of the STRESS. But this program has so much restrictions that it is urgent to extend the program to the grillage problems of arbitrary loading and boundary conditions.

• International Journal of Ocean System Engineering
• /
• 제1권1호
• /
• pp.28-31
• /
• 2011

An attempt was made to compute the free surface deformation due to the impact of a water droplet. The Cauchy Poisson, i.e. the initial value problem, was solved with the kinematic and dynamic free surface boundary conditions linearized. The zero order Hankel transformation and Laplace transform were applied to the related equations. The initial condition for the free surface profile was derived from a captured video image. The effect of the surface tension was not significant with the water mass used in this investigation. The computed and observed free surface deformations were compared.