• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1424-1429
• /
• 2003

In this paper, the design method of sliding mode control (SMC) system for SISO linear system is discussed. First, we consider the similarity between the design method of sliding mode hyper plane using the strict positive realness and the characteristics of zeros of feedback system and the design method of simple adaptive control. Based on such a consideration, we propose the new design method of SMC system using parallel dynamic compensator. As a result, SMC system can be constructed only with the derivative of output signal for controlled plant. The performance of SMC system designed by proposed method is confirmed through the numerical example.

• International Journal of Internet, Broadcasting and Communication
• /
• v.6 no.1
• /
• pp.9-12
• /
• 2014

We present a mathematical method for calculation of transmission zero locations, determining a filtering characteristics of two-port systems. By adjusting element values based on the zero locations, the frequency-selectivity is characterized. The characteristic polynomial of ladder networks in externally-loaded feed-forward systems is considered by adopting chain matrices for subsystems. This method can be extended to other types of lumped systems with cross-coupled sections. We find out the zeros by solving characteristics polynomials of closed-form expressions in terms of Laplace impedances of elements. The pairs of complex zeros are shown to be solely from the cross-coupled portion of the system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.3
• /
• pp.10-17
• /
• 2003

In this paper, genetic algorithm (GA)-based Thin Film Bulk Acoustic Resonator (FBAR) RF filter design technique is proposed. Since the BVD(Butterworth-Van Dyke) lumped element model is valid only around the resonance, FBAR filter design technique based on BVD circuit has an approximate error. Instead of using BVD model, optimizing filter design method utilizes an analytical electrical impedance equation of FBAR. The geometry of FBAR such as thickness of the piezoelectric layer and area which significantly affect the filter response is optimized by GA. US-PCS Rx Bandpass filter obtained by the proposed technique shows a better response comparing with the typical and BVD-based filter.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.4
• /
• pp.41-54
• /
• 2002

In this study, we have analyzed the effects of the membrane layer and the bragg reflector layers on the resonance characteristics through comparing the characteristics of the membrane type FBAR (Film Bulk Acoustic Wave Resonator) and the one type bragg reflector layers with those of the ideal FBAR with top and bottom electrode contacting air by using equivalent circuit technique. It is assumed that ZnO is used for piezoelectric film, $SiO_2$ are used for membrane layer and low acoustic impedance layer, W are used for the high acoustic reflector layer and Al is used for the electrode. Each layer is considered to have a acoustic propagation loss. ABCD parameters are picked out and input impedance is calculated by converting 1-port equivalent circuit to simplified equivalent circuit that ABCD parameters are picked out possible. From the variation of resonance frequency due to the change of thickness of electrode layers, reflector layers and membrane layer it is confirmed that membrane layer and the reflector layer just under the electrode have the greatest effect on the variation of resonance frequency. From the variation of resonance properties, K and electrical Q with the number of layers, K is not much affected by the number of layers but electrical Q increases with the number of layers when the number of layers is less than seven. The electrical Q is saturated when the number of layers is large than six. The electrical Q is dependent of mechanical Q of reflector layers and membrane layer. Both ladder filter and SCF (Stacked Crystal Filters) show higher insertion loss and out-of-band rejection with the increase of the number of resonators. The insertion loss decreases with the increase of the number of reflector layers but the bandwidth is not much affected by the number of reflector layers. Ladder Filter and SCF with membrane layer show the spurious response due to spurious resonance properties. Ladder filter shows better skirt-selectivity characteristics in bandwidth but SCF shows better characteristics in insertion loss.

• Journal of the Korean Ceramic Society
• /
• v.23 no.3
• /
• pp.21-26
• /
• 1986

In this study the system of $Pb(Mn_{1/3} Nb_{2/3})O_3-PbTiO_3-PbZrO_3$ piexoelectric ceramics was made in the radial mode disk and attenuation characteristic of the desinged ladder type filter was investigated. What is more temperature dependance of resonant frequency and variation of resonant frequency was examined by chan-ging the electrode diameter of piezoelectric resonator. (A Group : De=11mm, B Group : De=7.5mm and C Gro-up : De=5.5mm) Upon investigation it was the following. The center frequency of A, B and c filter showed up in the 200KHz, 270KHz and 380KHz respectively. As the electrode diameter decreased center frequency in creased abruptly. As the Co_2/Co1 increased attenuation characteristics and selectivity was improved. As the x=50. resonant frequ-ency invaried with variation of temperature.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.3
• /
• pp.83-90
• /
• 2001

Conventional SAW duplexer filters employ a 1/4 wavelength transmission line, which causes difficulty in fabrication of the strip line on the package. Its manufacturing process is also complicated, because it needs integrating process of the separate transmitting filter, receiving filter and isolation circuits. This paper concerns development of a new structure of the duplexer filter that has all the transmitting filter, the receiving filter and the isolation circuit as a one chip device. For composition of the duplexer, we design the component SAW ladder filters and the isolation network consisting of lumped inductor and capacitor elements. Performance of the whole duplexer is optimized by the nonlinear multivariable minimization of a proper target function, and the result is compared with that of commercial filters.

• International journal of advanced smart convergence
• /
• v.6 no.4
• /
• pp.33-40
• /
• 2017

In this paper, complex quadruplet zeros of microwave filter systems are investigated. For the cascaded systems the chain matrices are most conveniently used to derive the voltage transfer function of Laplace transform with cascaded two-port subsystems. The convenient relations of transfer function and chain matrix are used in order to find the transmission zeros. Starting from a ladder network, we introduced a crossed-coupled lumped element, in order to show the improved response of bandpass filter. By solving the transmission zero characteristic equation derived from the cascaded subsystems, we found the zeros of filter system with externally cross-coupled lumped elements. With the cross-coupled elements of capacitors, the numerator polynomial of system transfer function is used to locate the quadruplet zeros in complex plane. When the two pairs of double are on the zeros -axis, with the perturbed values of element, we learned that the transition band of lowpass filter is improved. By solving the characteristic equation of cascaded transfer function, we can obtain the zeros of the cross-coupled filter system, as a result of perturbed values on lumped element.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.2
• /
• pp.140-147
• /
• 1987

In this paper, seven-order elliptic low-pass passive network is synthesized by using doublyterminated ladder network is directly transformed into the active network which has the advantage of low sensitivity and can be realized conveniently. The circuit simulation results of passive network and active network synthesized with FDNR and Leap-frog technique are compared, and it is proved that the two rest work has the same characteristics.

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.1
• /
• pp.83-87
• /
• 2000

To investigate exhausted-medium-induced apoptosis in human corneal epithelial(HCE) cells, this study was performed DNA gel electrophoresis, M30 CytoDEATH staining and FAS-FAS ligand ELISA. SV-40 transfected cells were grown to confluency in culture for 7days. The supernatant was harvested and filtered with $0.22{\mu}m$ filter paper. Fresh HCE cells were exposed to the filtered exhausted medium for 1~2 days. Apoptotic cells were prepared for DNA extraction and run the agarose gel for DNA ladder pattern. M30 CytoDEATH was used a tool for easy and reliable determination of very early apoptosis in HCE cells. The control and exhausted medium were assayed for soluble FAS/FAS ligand protein by ELISA. HCE cells exposed to exhausted medium showed a typical DNA ladder pattern. Sporadic M30 CytoDEATH positive cells were detected among HCE cells exposed to exhausted medium. Soluble FAS/FAS ligand levels were not elevated in the exhausted medium compared to the fresh medium control. This study suggests that possible mechanism of exhausted medium induced apoptosis does not include the FAS-FAS ligand system.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.367-370
• /
• 1998

A hybrid-integrated SAW(surface acoustic wave) douplexer including transmitter(Tx) filter, receiver(Rx) filter an dantenna terminal has been studied. The prototype duplxer was designed for CDMA system application in the 800 MHz-band. Ladder type SAW filters consisting of one port SAW resonators wer integrated on epoxy substrate to demonstrate the feasiblity of antenna duplexer. In order to perform the duplexing function, a strip line for impedance transformaton with length of .gamma./4 was inserted at rx path. The fabricted duplexer has an insertion loss of 3.0 dB at Tx path and 3.7 dB at Rx path. The attenuation has more than 40dB.