• Journal of Korean Society of Forest Science
• /
• v.85 no.4
• /
• pp.596-604
• /
• 1996

This study was carried out to offer the successive method of cultivation and increase the productivity of mushroom yield with good quality through the elevation of rate of spawn development for Lentinus edodes. Studied about the analysis of current management of actural cultivation, a base of these, researched and presented for the upward method of productivity through an experiment of the high rate of spawn development and cultivation, putting first cultural environment. The results obtained were as follows ; 1. As the result of the analysis of current management in actural cultivation, many cultivators had a tendency to neglect managements of cultivation. These were reason for the deficiency of labour, funds and the lack of knowledge of cultivation, etc. 2. Water contents in bed logs according to the date of inoculation was shown as the decreasing order of 28.63%(3/12), 25.20%(3/25) and 23.19%(4/10). For the purpose of the maintenance of the water contents, the full-development of mycelium in bed logs and the dispersion of labour, the date of inoculation should be started in the early March. 3. The difference of the rate of spawn development among species was not shown, 100%(Mori 465). 98.98%(Mori 3046) on the spawn in high temperature and 98.97%(Mori 290) on the spawn in low temperature. The relative rate of spawn development was 97.70%(Mori 465), 82.45%(Mori 3046) on the spawn in high temperature and 88.87%(Mori 290) on the spawn in low temperature, it showed the difference. The spawn should be selected carefully in the future, as the spawn of cultivater's preference showed the difference for the development of mycelium. 4. The rate of spawn development following the date of inoculation was 100.0%(3/12), 98.98%(3/25) and 96.79%(4/10) on the spawn in high temperature and 99.09%(3/12), 98.97%(3/25) and 97.89% (4/10) in low temperature, it showed little difference. And the relative rate of spawn development was 97.70%(3/12), 82.45%(3/25) and 81.42%(4/10) on the spawn in high temperature and 93.27%(3/12), 89.67%(3/25) and 88.87%(4/10) that in low temperature, As the result of the relative rate, the time of inoculation of spawn should begin in the early March. 5. The height of stock logs on temporary placing should be less than 60cm at most on the surface, because of the low rate of water contents.

• Journal of Sericultural and Entomological Science
• /
• v.26 no.2
• /
• pp.11-15
• /
• 1984

To save the labour reguired for separation of copulated moth during egg Production, some of the chemicals available at the market were on screen test for easy separation of copulated moth of silkworm. The obtained results are summarized as following. 1. In a separation ratio of copulated moth along with a treating time, TCTFE(Trichloro-trifluoroethane) completely separated the copulated moth in 10 minutes. The combinations of TCTFE plus Acetone (87.5 : 12.5 V/V) and TCTFE plus Acetic acid (50 : 50 V/V) take 25minutes for the complete separation of copulated moth. Use of Acetic acid solution only makes 100% separation of copulated moth in one hour and foully minutes and non$.$treatment shows only 47.5% of separation in three and half hours. On the other hand. There is no statistical significance between TCTFE Plus Acetone and control in the egg productivity. 2. The combination of TCTFE Plus Acetone (87.5 : 12.5 V/V) does not infuluence the egg productivity of the moth, showing 443 grains for an average number of egg per moth out of which 417 grains are for the number of fertilized eggs while control shows 452 grains for an avarage number of egg/moth and 428 grains for the number of fertilized eggs. However a sing1e use of TCTFE and Acetic acid shows less egg productivity and number of ferilized eggs per moth, respectively as compared to those of the control. In particular, a single use of acetic acid makes an increase of number of non-egg prodncible moth and it seems to be brought due to a chemical damage. 3. In a rearing test of the egg laid by the chemical treated moth, there are no differences among the treatments in all of the useful characters of the larvae; larval duration, survival rate, cocoon yield, single cocoon weight, single cocoon shell weight and cocoon shell ratio. In these regards, it is recognized that TCTFE can be practically used for the separation of copulated moth and the combination of TCTFE and Acetone promote its efiectiveness on the separation of copulated moth.

• Journal of Labour Economics
• /
• v.24 no.3
• /
• pp.13-38
• /
• 2001

The question about whether a shorter workweek may increase employment has been a serious issue and been furiously debated among collective bargainers. The advocators recommend publicly that a reduction in standard working hours will provide benefits to the unemployed through the provision of new jobs, and also can improve the quality of life workers. The opponents argue that a shorter workweek will increase labor costs and induce firms to reduce their production levels, and consequently cut back their demand for labor. Although the debate is still continuing, considerable has been made toward achieving the goal workweek reduction. The analytical framework of this paper is a Putty-clay-model, in which the short-and long-term impacts of changes in working time on the employment associated with the interrelations of wages, prices, hourly labour productivity, the firm's labor demand, business cycle and economic growth etc. must be analyzed.

• Journal of Animal Environmental Science
• /
• v.1 no.1
• /
• pp.9-19
• /
• 1995

This study was carried out to investigate the effect of sawdust bedding barn on manure handing, management labour and physiological aspect of dairy cows, and then to establish the criteria on the optimum utilization method of sawdust bedding barn. 46 tie stall barns and 49 sawdust bedding barns were surveyed to cmopare the milk productivity between two different barns, and also 5 tie stall barns, 15 sawdust bedding barns and 1 rice hull bedding barn were selected to study the utilization situation of sawdust barn in Kyung-Ki province area. The major results obtained were as follows; 1. The roof material of sawdust barn were consisted of 66% vinyl house, 23% PVC light and 11% slate and galvanum coated tin. Most of the floor structure was earth ground with the rate of the approximately 82%. 2. The average occupied area of sawdust bed per cow was 15.2 $m^2$, depth that 30 cm and the utilization period was 12 months. 3. Milk Yield was significantly higher at sawdust barn than at tie stall barn(P<0.01). Bacterial and somatic cell count in raw milk were less at the sawdust barn than in tie stall barn. However, there was not significance difference between two barns. 4. The labour hour needed to cow management in the sawdust barn was approximately 48% of that of tie stall barn. 5. The temperature and moisture content measured in sawdust bed were closely affected by seasonal ambient temperature. The skin and hair of cow were much cleaner at the PVC light roofed sawdust barn than any other roof materials. 6. The additives used for improving of fermentation did not show any effect on temperature and moisture content in sawdust bed. When the ambient temperature was $30.4^{\circ}C$, the surface temperature of measured 1 cm above the sawdust bed was $12.2^{\circ}C$ lower and the temperature of 100 cm above the sawdust bed was $2.4^{\circ}C lower under shading net facility than that of vinyl roofed one.7. The hoof length of miking cow was 7.95 cm in tie stall and 9.19 cm in sawdust barn with high significance (P<0.01). And disease occurence such as mastitis and foot-rot tended to decrease in the sawdust barn. 8. The number of total bacteria and coliform bacteria were less in the sawdust bed compared with earth ground resting area. And a parasite strongyloides papillosus was detected but without any infected cow. 9. The nitrate($NO_3N$) content in non-roofed earth ground resting area and earth ground under the sawdust bed was likely to pollute the ground water. 10. In economic point of view, rice hull bedding barn was the cheapest among different systems. And in the sawdust bedding barn PVC light + slate roofed barn was most desirable, and vinyl roofed one the least.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.7 no.1
• /
• pp.85-92
• /
• 1969

The goal for the improvement of rice culture in our country is to increase the rice yield per unit area, and that thoroughly, to equalize the rice yield per unit are highly by adaptation of high technique, while on the side of the efficiency, to increase the productivity of the labour through the cooperative work. And then, the theory for execution of the cooperative rice culture which is the productive system embodying the goal above and the expected effects as well as the future prospect for the development of the cooperative rice culture must be studied and defined. The results studied up to now are summarized as follows: 1. The cooperative rice culture is one of the most effective ways to execute highly efficient farm management and to supply the technical details on the cultivation for equalized high yield per unit area in the rice cultivating districts. 2. For the most effective accomplishment of the cooperative rice culture, the water control, and soil and variety of rice must be investigated in advance an then the basic technical details for the rice culture must be defined. 3. The rice cultivation calender is drawn up with the main technical details of rice culture by the mutual agreement of all farmers belong to the cooperative farm. All technical details for the rice cultivation in the cooperative farm are standardized by the rice cultivation calendar and the main technical operations should be worked together and the other operations executed individually. 4. The technique for rice cultivation, which was difficult to be introduced in the individual farm management, could be introduced easily to the cooperative rice culture, and the rice yield of the cooperative farm was increased 23.3% compared to that of common farm in 1968. 5. At present, the type of the cooperative rice culture is a primary type of the agreement for farm management, rarely including the associated operation type and the contracted operation type for a part of operation, However, for stabilized high yield through the mechanization of the cultivation system, the cooperative farm must be developed for a course promoting the associated operation type including the technique trust type and the contracted operation type according to the condition of location.

• Journal of Korean Society of Forest Science
• /
• v.80 no.2
• /
• pp.220-231
• /
• 1991

The main purpose of this research is to standardize the logging operation with special reference to the net working time for thinning. This study was carried out to obtain the standard working method and working technique for Korean logging operation through the comparison of the present Korean working method and the German standard working method 1. The net working time devided into work elements showed little difference between those two working methods. 2. From the correlation analysis, net working time was significantly correlated with breast height diameter, the dependant variable, with the highest correlation coefficient in each species. 3. Total working time increases by 11 to 13 seconds to every 1 centimeter increase in breast height diameter from i to 16 centimeter. 4. The result of this study concluded that the German working method is recommended for improving the labour problems in the forest operation due to high wages and lack of manpower gradually increasing from now in Korea. In addition to the application of this standard working method, the technical training for the method should be done to the workers for improving the productivity.

• Journal of Labour Economics
• /
• v.30 no.2
• /
• pp.1-31
• /
• 2007

The purpose of this paper is to analyse wage differentials between non-regular and regular works. Data from EAPS(Economically Active Population Survey) 2005 show that the monthly wage level of non-regular worker is only 63% of regular worker and thus there exist 37% wage differentials. However, these wage differentials do not control for hours of work, the amount of human capital, job characteristics, and other individual characteristics affecting wages. If these variables are added to the hourly wage regression equation, the wage gap between non-regular and regular workers drastically decreases to 2.2%. Furthermore, decomposition of the wage differentials by Oaxaca method shows that productivity difference between non-regular and regular workers explains up to 91% of the wage gap. This implies that the magnitude of wage discrimination against non-regular workers is at most 0.2% of hourly wage of regular workers. To control for unobserved individual heterogeneities more accurately, we also construct panel data and estimate wage differentials. The results from the panel data approach show that there is no difference in the hourly wages between non-regular and regular workers. In some specifications, the wage rate of non-regular worker is rather higher than that of regular worker. These results are consistent with economic theory. Other things being equal, workers with unstable employment may require higher wages to compensate their unstability. Firms are willing to pay higher wages if they can get more flexibility from non-regular employment. Empirical results in this paper cast doubt on the view that there is wage discrimination against non-regular workers in the labor market. Public policies should be targeted for disadvantaged groups among non-regular workers, not for non-regular workers in general.

• Journal of the Korean Home Economics Association
• /
• v.32 no.5
• /
• pp.165-182
• /
• 1994

Korea's clothing industry which has been country's leading export industry and basic strategical industry is now faced with many difficulties both domestically and internationally. Domestically it is faced with continuing shortage of manpower in both production line and management high labour cost causing increase in price putting more weight on behavior of consumers resulting in change of industrial environment and continuing structural problems of industry itself. Internationally it is faced with strengthening of import regulations and protectionism of developed countries and rapid emergence of underdeveloped countries as leading exporting nations. In reality export plays the most essential role in our economy and is especially sensitive to the external environmental factors. Already economic bloc phonomenon can be seen everywhere and is continuing to accelerate in place such as E. U in Europ, North & South America as NAFTA, and South East Asian contries which recent tendency of economic unity effort is present. These countries of such economic blocs are imposing heavy custom duties reinforcing provision of country origin and acting out strict inspection regulations in order to protect the interest of their own industry. Therefore it is vital to manufacture excellent quality goods For these reasons study in this area has brought attention in Korea as well as worldwide in the recent years. Apparel industry which requires professional technology and ability is the most competitive international business. In order to challenge the international market the high level of intelligence is most required to produce high quality goods. The purpose of this study is to analyze the relationship between functions and roles of marketing and to approach problems in more efficient manner. Apparel industry is composed of various programs such as design pattern making merchandising and textile science. To succeed in the business is to give the highest satisfaction to the targeted market. Hence this study will example the factors that determine the Cost Quality and Performance of apparel products. The study will involve following steps; firstly establish relationship between the quality concept and productivity of apparel products Secondly inquire in to marketing strategy laying stress on apparel production related factors focusing on merchandising marketing production and operations Thirdly prospect 21st century apparel industry focusing on garment production and trade and also other countries structural improvement Fourthly establish the new dimension of competitive factors by grasping the actual circumstance of Korea's apparel industry in the international market. The research method will include; First reality approach method by analysing the present state of industry Second literal analysis such as marketing comparisons between leading apparel exporting countries.

• Journal of the Korean Society of Costume
• /
• v.57 no.2 s.111
• /
• pp.69-85
• /
• 2007

Despite the recovery of consumer expenditure and retailing in the Korean economy after 2001, the domestic apparel industry has been aggravated by negative growth in both productivity and production. The purpose of the stud? is to diagnose the develop competitive of the Korean apparel industry and derive implications for this after estimating the efficiency of the Korean apparel companies with Data Envelopment Analysis. Data Envelopment Analysis(DEA) is a methodology based in non-parametric analysis and linear programming. It was developed for measuring the relative efficiency of a set of firms that use inputs to produce outputs. Data used fer input and output variables in the analysis are drawn from financial statement recorded by the Korean Financial Supervisory Service. The initial input data comprise the number fo the employees, fixed assets, general management and selling expenses, and cost of sales. The initial outputs are the operating profit and the gross margin. To summary the results, the efficiencies of the Korean apparel companies has increased yearly in spite of being overabundance of investment in Labour and Capital. According to correlation between input and output variables, the Korean apparel industry has been revamping gradually from labor intensive industries to the capital. The companies need to reduce costs in the results from the number of employees, fixed asset and cost of sales to transform into an efficiently enterprise. The companies owning or obtaining a brand had bitter establish an outsourcing strategic in production, while OEM corporations are called far setting up a manufactory in domestic or abroad. Although the paper is derived some implications with production efficiencies, the relation between apparel companies and brand power, consumption level of consumer, and social trend is remained on a limitation to the study. The next research necessitates a topic with Fashion industry or examining the correlation between brand value, social propensity and profit margin.

• Korea journal of population studies
• /
• v.16 no.2
• /
• pp.1-23
• /
• 1993

Korea fertility level has dropped since the 1960's and speed of decline has accelerated in the 1980's. In the resuls, the growth rate reached to less then 1 percent in 1990 and will be $\ulcorner$0 $\lrcorner$ percent growth in 2021. The total population will increase to 50, 586 thousand persons in 2021 then will decrease. With the rapid fertility decline the age structure of Korean population has changed : while the proportion of child population aged 0-14 is decreasing sharply, that of old-age population aged 65 and over is increasing. Because of the recent increase of sex ratio at birth, the sex structure among the young generation has been destorted; the sex ratio at age 0-4 was as high as high as 112.0 in 1990. The effects of these population phenomena on Korean society are the followings: 1) Old age dependency ratio is increasing rapidly and continuously and will be about 40.0 from the 2050's. 2) Because of the rapid decline of the number of births, the absolute number of the major labour force at age 25-34 will decrease after around 2000 and then from the 2010's become less than that in 1990. 3) Since the large fertility defferentials by womens's educational level have continued and the relation between the educational levels of mothers and children are very strong, level has dropped among higher educated women first when the average fertility level has declined in Korea, the average educational level of the children is may be expected to be relatively low and then the future productivity is will be also low, which causes the decline of 'quality of population. 4) When the high sex ratio at birth (over 110 since 1986) continues, number of brides will be short by over 20 percent from the 2010s, which will bring various kinds of social prblems. Therefore, the counter measures in concrete to relieve the heavy problems are recommended as follows: 1) The extention of the birth intervals, which helps to drop the population growth rate at the same level of number of children per women. 2) The positive supports for out-migrants, which helps to reduce the population size without any destortion of age-sex structure. 3) The defferent supports of family planning for the higher and lower classes, which helps to reduce the gaps between different ferility levels of the classes and to keep and improve the quality of population. 4)population education for both students and adults, which helps to minimize the gap between the private and public requirements.