• 제목/요약/키워드: LVDT 센서

검색결과 49건 처리시간 0.03초

고정도 3상 직선형 절대 위치 센서의 구현 (An Implementation of High-precision Three-phase Linear Absolute Position Sensor)

  • 이창수
    • 전기전자학회논문지
    • /
    • 제19권3호
    • /
    • pp.335-341
    • /
    • 2015
  • 최근 들어 철강의 두께 제어를 위해 고정밀도의 절대 위치 검출 센서에 대한 필요성은 증가하고 있다. 열악한 공장 환경 하에서 직선 운동하는 실린더의 절대 위치를 측정하기 위해서는 LVDT가 널리 사용된다. 본 논문에서는 1 미크론의 고해상도를 가지는 3상 LVDT 및 L/D (LVDT to digital) 변환기를 구현하였다. 이를 위하여 첫째 U, V, W 3상 정현파에 대한 시그널링을 FPGA로 설계하였다. 둘째 위치 정보에 대한 A상, B상 펄스 파형 출력 알고리즘을 구현하였다. 마지막으로 성능 평가를 위하여 기존의 센서들과 비교하였다. 실험 결과 직선성 편이 오차는 0.009788 [mm] 로써 2.2% 향상된 결과를 얻었고 정현파의 왜곡률은 평균 0.0751%로 기존보다 33%의 향상된 결과를 얻어 우수한 센서임을 입증하였다.

변위측정용 LVDT의 개선에 관한 연구 (Study on Improvement of a LVDT for Displacement Measurements)

  • 박영태;권성원;강전홍
    • 센서학회지
    • /
    • 제5권3호
    • /
    • pp.1-8
    • /
    • 1996
  • LVDT는 독립적으로 움직일 수 있는 코어의 변위에 비례하여 전기적 출력을 나타내는 전기기계적 트랜스듀서이다. 기존의 일반적 LVDT는 구조적으로 측정범위에 대해 크기의 비가 작은 단점을 가지고 있다. 이러한 단점을 개선하기 위하여, 새로운 형태의 LVDT를 제안하였고 동일한 치수와 코어를 가진 두가지 형태의 LVDT에 대하여 FEM 해석을 통하여 시뮬레이션하였다. 시뮬레이션 한 결과를 토대로 이들을 제작하여 그 특성을 비교하였으며 시험결과 측정범위${\pm}5\;mm$ 에서 일반 LVDT는 ${\pm}3\;%$의 선형도를 나타내었으며, 본 연구에서 제안한 LVDT는 ${\pm}0.5\;%$의 선형특성을 나타내었다. 따라서 이론적 결과와 실험적 결과를 통하여 기존의 LVDT보다 제안된 LVDT의 특성이 우수함을 확인할 수 있었다.

  • PDF

PDA와 광섬유 센서를 이용한 교량의 무선계측 시스템 개발 (Development of Wireless Measurement System for Bridge Using PDA and Fiber Optical Sensor)

  • 곽계환;황해성;장화섭;김우종;김회옥
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제13권1호통권53호
    • /
    • pp.88-96
    • /
    • 2009
  • 본 연구에서는 FBG 센서 및 PDA를 이용하여 새로운 안전관리 시스템인 무선 계측 시스템을 개발하기 위해 FBG 센서를 이용하여 광섬유 변위(FBG-LVDT) 센서, 광섬유 변형률(FBG-STRAIN) 센서, 광섬유 온도(FBG-TEMP) 센서 그리고 광섬유 가속도(FBG-ACC) 센서를 특별 제작하였다. 또한, 신호처리 시스템에는 적용된 FBG 센서들의 무선송신 시스템이 가능하도록 신호처리 시스템을 구성하였으며, PDA를 이용하여 원격 거리에서도 display가 가능할 수 있도록 프로그램을 개발하였다. 개발된 FBG 센서들과 무선계측 모니터링 시스템의 현장 적용성, 정확성 및 활용 가능성을 검증하고자 현장 교량에서 정적, 동적 재하시험을 실시하였다. 또한, FBG-LVDT 센서, FBG-ACC 센서에 의하여 측정된 동적 데이터들은 Meister의 진동등감각 곡선에 적용시킴으로서 교량의 진동에 대한 사용성 평가를 실시하였고 교량의 진동 사용성을 고려하여 진동 제한 기준을 제시하여 대상 교량의 진동 평가를 위한 방법을 마련하였다.

선형변이 차동변압기 센서의 직선성오차 보정기법 (A Compensation Technique of the Linearity Error of Linear Variable Differential Transformer)

  • 최주호;황의성;홍성수;유준
    • 제어로봇시스템학회논문지
    • /
    • 제6권1호
    • /
    • pp.51-56
    • /
    • 2000
  • This paper presents the characteristics of the dynamic response and calibration technique on a linear variable differential transformer(LVDT). The linear error of the LVDT was proven $\pm$1% in the static calibration and $\pm$0.5% in the dynamic calibration. In this paper, the linearity error generated in the static and dynamic state of the core movement can be eliminated using the correction algorithem of the static and dynamic state derived from the least square linear approximation for the nonlinearity of the curves of direct data fitting and Lagrange polynomials. With the static and dynamic calibration method, the calibration accuracy of the LVDT can be reduced to within $\pm{0.5%.}$.

  • PDF

LVDT센서를 이용한 접촉식 두께자동측정기 개발 (Development of Contact-Type Thickness Measurement Machine using LVDT Sensors)

  • 신기열;황선
    • 한국기계가공학회지
    • /
    • 제14권4호
    • /
    • pp.151-159
    • /
    • 2015
  • In this study, we developed an automated contact-type thickness measurement machine that continuously and precisely measures the thickness of a PCB module product using multi-LVDT sensors. The system contains a measurement part to automatically measure the thickness in real time according to the set conditions with an alignment supply unit and unloading unit to separate OK and NG products. The sensors were calibrated before assembly in the measuring machine, and precision and accuracy performance tests were also performed to reduce uncertainty errors in the measurement machine. In the calibration test, the precision errors of the LVDT sensor were determined to be $1-3{\mu}m$ as 0.1% at the measuring range. A measurement error of 0.8 mm and 1.0 mm thickness test standards were found to be $1{\mu}m$ and $4{\mu}m$, and the standard deviations of two 1.0 mm products were measured as $14{\mu}m$ and $8{\mu}m$, respectively. In the measurement system analysis, the accuracies of test PCB standards were found to be $2{\mu}m$ and $3{\mu}m$, respectively. From the results of gage repeatability and reproducibility (R & R) crossed, we found that the machine is suitable for the measurement and process control in the mass production line as 7.92% of total gage R & R and in seven distinct categories. The maximum operating speed was limited at 13 pcs/min, showing a value good enough to measure.

LVDT를 이용한 선박용 디젤 엔진의 실린더 라이너 마모 계측시스템 개발 및 성능평가 (Development of LVDT-Based Measuring System of the Cylinder Liner Wear for Marine Diesel Engines and Its Performance Evaluation)

  • 하윤수
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제35권6호
    • /
    • pp.829-834
    • /
    • 2011
  • 본 논문에서는 대형 선박용 디젤 엔진의 실린더 라이너의 마모량을 측정하는 새로운 시스템의 개발에 관하여 소개한다. 제안된 시스템은 LVDT, 온도센서, 실린더 내부의 밝기조절용 LED 및 카메라가 각각 1개씩 부착된 측정부, 계측명령전달 및 측정데이터 모니터링을 담당하는 컴퓨터기반 모니터링부, 측정부의 제어 및 측정데이터의 모니터링부로의 전송을 담당하는 주 제어부로 구성된다. 개발된 시스템의 정도는 1/100 mm 의 측정정도를 갖는 내경게이지의 것과 비교되어진다.

GPS와 가속도계를 이용한 구조물 거동모니터링의 타당성 연구 (Feasibility Study of Structural Behavior Monitoring Using GPS and Accelerometer)

  • 한정헌;류성찬;조두용;박선규
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제16권3호
    • /
    • pp.11-22
    • /
    • 2012
  • 본 연구는 RTK-GPS (Real Time Kinematic-Global Positioning System) 측위법을 이용한 변위 계측 결과, 가속도계를 이용한 변위계측 결과, 그리고 LVDT(Linear variable differential transformer)의 변위계측 결과를 비교하여 RTK-GPS와 가속도계 센서를 구조물에 적용할 때의 문제점들을 파악하였다. 또한, 관측빈도와 측위 정확도를 향상시킨 RTK-GPS와 가속도계를 이용한 변위계측 결과를 통합 계산하여 절대변위인 LVDT와 비교를 통해 생성된 통합 변위의 정확도와 타당성을 확인하였다.

LVDT 센서를 이용한 외경 측정 방안에 대한 연구 (A Study on the out-diameter measuring machine by the LVDT sensors)

  • 황정호;노지훈;박기홍
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2006년도 춘계학술대회 논문집
    • /
    • pp.291-292
    • /
    • 2006
  • Currently A demand of high precision workpiece is increasing in industry. At present, roundness measuring machine using Air bearing, coordinate measuring machine that are used from measurement station. but these machines will not be able to apply to In-line process. because of like these machine's price are very expensive and measurement time is long. also, the complexity of conventional roundness measurement method based on fourier transform, it makes difficult to development analysis program. This work present new architecture of a Out-diameter measuring system fur analysis of roundness of product. In this system, the influence of table motion errors is minimize by using two LVDT sensor and knife edge contact tip. We are produce a test machine and make an experimenter on Out-diameter of test bearing. The measurement result compared with roundness measuring machine.

  • PDF