• 한국기계연구소 소보
• /
• 통권15호
• /
• pp.105-115
• /
• 1985

For the application of factory automation, a 3-axis numerical control system with personal computer and KM3701 function generator LSI chip, which has liner, circular, parabolic, logarithmic, and exponential interpolations, is developed. The developed system also has 2 control function to stabilize tooling speed and 1/1000mm step sizes.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 춘계총회 및 연구발표회 초록집
• /
• pp.141.2-141
• /
• 2003

• 전자공학회논문지S
• /
• 제34S권2호
• /
• pp.79-93
• /
• 1997

This paper presents a linear shift-invariant system euqivalent to morphological dilation for a memoryless uniform source in the sense of the power spectral density function, and comares it with dialtion. This equivalent LSI system is found through spectral decomposition and, for dilation and with windwo size L, it is shown to be a finite impulse response filter composed of L-1 delays, L multipliers and three adders. Th ecoefficients of the equivalent systems are tabulated. The comparisons of dilation and its equivalent LSI system show that probability density functions of the output sequences of the two systems are quite different. In particular, the probability density functon from dilation of an independent and identically distributed uniform source over the unit interval (0, 1) shows heavy probability in around 1, while that from the equivalent LSI system shows probability concentration around themean vlaue and symmetricity about it. This difference is due to the fact that dilation is a non-linear process while the equivalent system is linear and shift-ivariant. In the case that dikation is fabored over LSI filters in subjective perforance tests, one of the factors can be traced to this difference in the probability distribution.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.95-96
• /
• 2006

CMOS Image Sensor(CIS) 소자에서 광감도의 향상과 천연색 형성을 위하여 적용하고 있는 Color-Filter 공정에서 국부적으로 발생하는 strip성 불량과 막질손상을 제거하기 위한 연구를 진행하였다. 우선 지역적 경향성을 보이는 불량에 대해서는 PR strip process type을 액조 진행방식에서 회전식으로 변경했을 때 제거됨을 확인하였고, 막질손상을 최소화하기 위해서는 새로운 유기용매의 적용이 필요하였다. 실험 결과, 케톤기를 가지는 화합물과 Polar Apotic 용매의 혼합화합물을 적용하였을 때 각 막질에 attack을 최소화하면서 원하는 PR만 선택적으로 제거 되며 미세잔류성분에 대한 제거력도 향상됨을 확인하였다.

• 대한전자공학회논문지
• /
• 제21권4호
• /
• pp.72-77
• /
• 1984

본 논문에서는 LSI layout의 배치 프로그램을 개발하고 그 실험 결과에 관해 논하였다. 100% 결선율 달성을 위해 가상 기선 경로법으로는 실제의 배선에 가까운 알고리즘을 도입하여 채널 밀도 계산에 반영하였다. 목적함수로는 총배선장의 최소화, 통과선수의 최소화, 최대 채널 밀도의 최소화를 동시에 산출 가능한 함수를 도입하였다. 제안된 가상배선경로 계산 알고리즘은 O(n2)으로 계산시간이 매우 바르고 최소배선장에 근사한 배선상태를 나타내므로 배치 문제에 적용하기에 매우 적합하다. 이 알고리즘을 사용하여 자동 배치 프로그램을 개발하고 작성된 프로그램의 실험결과를 통하여 제안된 알고리즘의 유용성을 보였다.

• 한국정보통신학회논문지
• /
• 제9권3호
• /
• pp.582-586
• /
• 2005

본 논문은 locking 상태에 따라서 루프대역폭이 변화하는 Phase Locked Loop (PLL)의 구조를 제안하였다. 제안한 PLL은 기본적인 PLL 블록과 NOR Gate, Inverter, Capacitor, 그리고 Schmitt trigger로 이루어진 Locking Status Indicator(LSI) 블록으로 구성되었다. LSI는 Loop Fille.(LF)에 공급되는 전류와 저항 값을 locking 상태에 따라 변화시켜서 unlock이 되면 넓은 루프대역폭 가지는 PLL로, lock이 되면 좁은 루프대역폭을 가지는 PLL로 동작하도록 한다. 이러한 구조의 PLL은 짧은 locking 시간과 저 잡음의 특성을 동시에 만족시킬 수 있다. 제안된 PLL은 Hynix CMOS $0.35{\mu}m$ 공정으로 Hspice 시뮬레이션 하였으며 40us의 짧은 locking 시간과 -76.1dBc 크기의 spur를 가진다.

• 한국CDE학회논문집
• /
• 제19권3호
• /
• pp.236-244
• /
• 2014

Presented in the paper is a reservation based dispatching rule to achieve the on-time delivery in system LSI (large scale integrated circuit) semiconductor fabrication (FAB) with urgent orders. Using the proposed reservation based dispatching rule, urgent lots can be processed without waiting in a queue. It is possible to achieve the on-time delivery of urgent orders by reserving a proper tool for the next step in advance while urgent lots are being processed at the previous step. It can cause, however, tardiness of normal lots, because the proposed rule assign urgent lots first. To solve this problem, the proposed rule tries to find the best tool for the reservation in the tool group, which can minimize idle time, and the reservation rule is applied at all tools except for photolithography tools (bottleneck). $MOZART^{(R)}$ which is developed by VMS solutions are used for simulation experiments. The experimentation results show that the reservation based dispatching rule can achieve the on-time delivery of normal lots as well as urgent lots.

• 한국세라믹학회지
• /
• 제45권9호
• /
• pp.561-566
• /
• 2008

Carbon fiber fabric-silicon carbide composites were fabricated by liquid silicon infiltration (LSI) process. The porous two-dimensional carbon fiber fabric performs were prepared by 13 plies of 2D-plain-weave fabric in a three laminating method, [0/90], [${\pm}45$], [$0/90/{\pm}45$] lay-up, respectively. Before laminating, a thin pyrolytic carbon (PyC) layer deposited on the surface of 2D-plain weave fabric sheets as interfacial layer with $C_3H_8$ and $N_2$ gas at $900^{\circ}C$. A densification of the preforms for $C_f-Si-SiC$ matrix composite was achieved according to the LSI process at $1650^{\circ}C$ for 30 min. in vacuum atmosphere. The bending strength of the each composite were measured and the microstructural consideration was performed by a FE-SEM.

• 대한전자공학회논문지
• /
• 제19권6호
• /
• pp.62-66
• /
• 1982

LSI의 레이아웃 CAD 시스템에 있어서 미체선 신호면에 대한 초선가능성을 판정하고 그것을 수정·해결하는 것은 중요하다. 본 논문에서는 무향 그라프 G=(V, E)를 도입하여 2개의 절점 독립(vertex-disjoint)경로의 존재여부를 판정하는 알고리즘을 제안하고, 경로가 존재하는 경우는미결선 신호선을 해결하고, 존재하지 않는 경우는 해결할 수 없음을 보이는 방법을 제시하였다. 제안한 알고리즘의 시간 복잡도는 O(|VlxlEl)이다. A method finding out routability for unrouted signal lines and rerouting those which are turned out to be able to route in layout design of LSI is described. In this paper the problems of finding two-disjoint Paths represented by an undirected graph G=(V,E), where V,E are sets of vertices and edges respectively, are studied. The existence of two-disjoint paths from s1, to t1, (called P1) and from S2 to T2 (called P2) indicated by the four vertices on the graph s1, t1, s2, t2 ∈ V means that two distinct signal lines exist in layout design. It turns out that the proposed time complexity in the algorithm is O (IVI x IEI).

• Carbon letters
• /
• 제12권2호
• /
• pp.116-119
• /
• 2011

C/SiC composites were prepared by boron nitride (BN)-assisted liquid silicon infiltration (LSI), and their anti-oxidation and mechanical properties were investigated. The microstructures, bulk densities, and porosities of the C/SiC composites demonstrated that the infiltration of liquid silicon into the composites improved them, because the layered-structure BN worked as a lubricant. Increasing the amount of BN improved the anti-oxidation of the prepared C/SiC composites. This synergistic effect was induced by the assistance of BN in the LSI. More thermally stable SiC was formed in the composite, and fewer pores were formed in the composite, which reduced inward oxygen diffusion. The mechanical strength of the composite increased up to the addition of 3% BN and decreased thereafter due to increased brittleness from the presence of more SiC in the composite. Based on the anti-oxidation and mechanical properties of the prepared composites, we concluded that improved anti-oxidation of C/SiC composites can be achieved through BN-assisted LSI, although there may be some degradation of the mechanical properties. The desired anti-oxidation and mechanical properties of the composite can be achieved by optimizing the BN-assisted LSI conditions.