• 전자공학회논문지
• /
• 제52권7호
• /
• pp.3-9
• /
• 2015

본 논문에서는 LPD (Low Probability of Detection) 특성을 갖는 CCSK (Cyclic Code Shift Keying) 기반의 통신 시스템에서 초기 시간 및 주파수 동기를 획득하기 위한 기법을 제안한다. LPD 통신 시스템은 통신 링크가 의도된 수신기 외에 다른 수신기에서 검파되지 않기 위한 목적으로 설계된 시스템으로 낮은 SNR (Signal-to-Noise Ratio) 영역에서 동작하는 CCSK 변조 기법을 이용하여 구현 가능하다. CCSK 기반의 통신 시스템이 정상적으로 동작하기 위해서는 초기 동기가 수행되어야 하지만 낮은 SNR 영역에서 시간 및 주파수 동기를 추정해야하는 문제점이 있다. 본 논문에서는 LPD 특성을 갖는 CCSK 기반의 통신 시스템에서 반복패턴을 이용한 초기 시간 및 주파수 동기 기법을 제안한다. 제안하는 기법은 낮은 SNR 영역에서 동작이 가능한 장점이 있다.

• 한국항공우주학회지
• /
• 제50권9호
• /
• pp.663-668
• /
• 2022

미국은 2000년대 초반부터 무기체계의 전투준비태세를 유지하면서 수명주기비용을 줄이기 위해서 TLCSM를 적용하였다. TLCSM이 적용되면서 획득단계 중심의 ILS 개념에서 전체 수명주기 동안 수명주기비용을 관리하는 개념인 IPS로 전환하였다. 또한 ILS를 개발하기 위한 LSAR은 IPS을 개발하기 위한 LPD로 전환하였다. 본 연구에서는 한국의 LSAR과 미국의 LPD를 비교 및 분석하여 LPD의 한국 도입 시 필요한 정책을 제안하였다.

• 시스템엔지니어링학술지
• /
• 제16권2호
• /
• pp.47-58
• /
• 2020

Most of the reactor trips in Korean NPPs related to core protection systems were caused not because of proximity of boiling crisis and, consequently, a damage in the core, but due to particular miscalculations or component failures related to the core protection system. The most common core protection system applied in Korean NPPs is the Core Protection Calculator System (CPCS), which is installed in OPR1000 and APR1400 plants. It generates a trip signal to scram the reactor in case of low Departure from Nucleate Boiling Ratio (DNBR) or high Local Power Density (LPD). However, is a reactor trip necessary to protect the core? Or could a fast power reduction be enough to recover the DNBR/LPD without a scram? In order to analyze the online calculation of DNBR/LPD, and the use of fast power reduction as trip avoidance methodology, a concept of CPCS with fast power reduction function was developed in Matlab® Simulink using systems engineering approach. The system was validated with maximum of 0.2% deviation from the reference and the dynamic deviation was maximum of 12.65% for DNBR and 6.72% for LPD during a transient of 16,000 seconds.

• Nuclear Engineering and Technology
• /
• 제41권9호
• /
• pp.1181-1190
• /
• 2009

Knowing more about the Local Power Density (LPD) at the hottest part of a nuclear reactor core can provide more important information than knowledge of the LPD at any other position. The LPD at the hottest part needs to be estimated accurately in order to prevent the fuel rod from melting in a nuclear reactor. Support Vector Machines (SVMs) have successfully been applied in classification and regression problems. Therefore, in this paper, the power peaking factor, which is defined as the highest LPD to the average power density in a reactor core, was estimated by SVMs which use numerous measured signals of the reactor coolant system. The SVM models were developed by using a training data set and validated by an independent test data set. The SVM models' uncertainty was analyzed by using 100 sampled training data sets and verification data sets. The prediction intervals were very small, which means that the predicted values were very accurate. The predicted values were then applied to the first fuel cycle of the Yonggwang Nuclear Power Plant Unit 3. The root mean squared error was approximately 0.15%, which is accurate enough for use in LPD monitoring and for core protection that uses LPD estimation.

• ETRI Journal
• /
• 제34권3호
• /
• pp.474-477
• /
• 2012

The MPEG-D unified speech and audio coding (USAC) standardization process was initiated by MPEG to develop an audio codec that is able to provide consistent quality for mixed speech and music contents. The current USAC reference model structure consists of frequency domain (FD) and linear prediction domain (LPD) core modules and is controlled using a signal classifier tool. In this letter, we propose an LPD single-mode USAC structure using an adaptive widowing-based transform-coded excitation module. We tested our system using official test items for all mono-evaluation modes. The results of the experiment show that the objective and subjective performances of the proposed single-mode USAC system are better than those of the FD/LPD dual-mode USAC system.

• 한국재료학회지
• /
• 제9권4호
• /
• pp.414-418
• /
• 1999

Typical metal oxide thin films having optical and electrical properties are widely used as inorganic functional materials. Liquid phase deposition(LPD) method, a new low temperature process, has been developed for the several advantages of no vacuum system, low cost, high throughput, and low processing temperature(<$50^{\circ}C$). Silica powder was added to 40wt% hydrofluoro-silicic acid($H_2$SiF\ulcorner) to obtain an immersing solution of silica-saturated hydrofluorosilicic acid solution. Boric acid solution was continuously added in the range from 0 to 0.05M to prepare supersaturated hydrofluorosilicic acid solution. LPD $SiL_2$film was formed with the variation of added amount of $H_2$O. The SiO$_2$thin film could be prepared from hydrofluorosilicic acid by LPD method. The thickness of LPD $_SiO2$film was influenced by the boric acid concentration and added amount of $H_2$O. Silicon in thin film existed as SiF\ulcorner by Raman spectrum.

• International Journal of Control, Automation, and Systems
• /
• 제1권2호
• /
• pp.243-251
• /
• 2003

In this paper, a new model for mobile soccer robot, a type of linear system, is presented. A controller, consisting of two loops the one of which is the inner state feedback loop designed for stability and plant be well conditioned and the outer loop is a well-known PI controller designed for tracking the reference input, is suggested. Because the plant, the soccer robot, is parameter dependent, it requires the controller to be insensitive to the parameter variation. To achieve this objective, the pole-sensitivity as a pole-variation with respect to the parameter variation is defined and design algorithms for state-feedback controllers are suggested, consisting of two matrices one of which is for general pole-placement and other for parameter insensitive. This paper shows that the PI controller is equivalent to the state feedback and the cost function for reference tracking is equivalent to the LQ cost. By using these properties, we suggest a tuning procedure for the PI controller. We that the control algorithm in this paper, based on the linear system theory, is well work by simulation, and the LPD system modeling and control are more easy treatment for soccer robot.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권10호
• /
• pp.3490-3507
• /
• 2014

License plate detection (LPD) is one of the most important aspects of an automatic license plate recognition system. Although there have been some successful license plate recognition (LPR) methods in past decades, it is still a challenging problem because of the diversity of plate formats and outdoor illumination conditions in image acquisition. Because the accurate detection of license plates under different conditions directly affects overall recognition system accuracy, different methods have been developed for LPD systems. In this paper, we propose a license plate detection method that is rapid and robust against variation, especially variations in illumination conditions. Taking the aspects of accuracy and speed into consideration, the proposed system consists of two stages. For each stage, Haar-like features are used to compute and select features from license plate images and a cascade classifier based on the concatenation of classifiers where each classifier is trained by an AdaBoost algorithm is used to classify parts of an image within a search window as either license plate or non-license plate. And it is followed by connected component analysis (CCA) for eliminating false positives. The two stages use different image preprocessing blocks: image preprocessing without adaptive thresholding for the first stage and image preprocessing with adaptive thresholding for the second stage. The method is faster and more accurate than most existing methods used in LPD. Experimental results demonstrate that the LPD rate is 98.38% and the average computational time is 54.64 ms.

• 한국광학회지
• /
• 제8권5호
• /
• pp.410-414
• /
• 1997

Laser projection display(LPD)는 레이저를 이용한 full color의 대형화면을 구현하는 system이다. $TeO_2$와 $LiNbO_3$ 단결정을 음향광학 매질과 transducer로 사용하여 이 system에 쓰이는 영상 신호 처리용 음향광학변조기(Acousto Optic Modulator : AOM)를 제작하고 그 특성을 평가하였다. AOM은 transducer에서 발생된 초음파가 가장 효과적으로 음향광학 매질에 전달되도록 simulation한 후 제작하였으며 제작된 AOM은 특성평가와 더불어 설계값에 맞게 제작되었는가를 회절효율 측정을 통해 검증하였다. LPD System에 실장된 AOM의 회절효율은 85%이며 rise time은 41.5 ns이다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.444-448
• /
• 2003

In this paper, the Lagrange dynamics is studied. A state space representation of Lagrange dynamics and control algorithm based on the state feedback pole placement are presented. The state space model presented is descriptor type linear parameter dependent system. It is shown that the control algorithms based on the linear system theory can be applicable to the state space representation of Lagrange dynamics. To show that the linear system theory can be applicable to the state space representation of Lagrange dynamics, the LMI based regional pole-placement design algorithm is developed and present two examples.