• Korean Institute of Interior Design Journal
• /
• v.21 no.2
• /
• pp.101-111
• /
• 2012

The purpose of this study is to draw emotional evaluation model related to LED lighting colors and suggest basic informations that enable planned directions of architectural pacade lighting to simulate beforehand in a laboratory. As experimental methods, extracted PAD emotional evaluation model and then directed a experimental model of 10 LED lighting colors, studied and analyzed survey questions. The results are as follows; First, in the case of P(Pleasure-Unpleasure), Red, Yellow, Green, Cyan, Magenta, White and Combination of $G{\leftrightarrow}B$ Colors are satisfying, vibrant and positive distribution chart has shown. Second, in the case of A(Arousal-Unarousal), Red, Yellow, Green, Cyan, Blue, White and Combinations of $R{\leftrightarrow}G$, $G{\leftrightarrow}B$, $R{\leftrightarrow}B$ Colors, it makes a little difference, they have shown useful distribution chart to induce sight in a aroused state. Third, in the case of D(Dominance-Submissiveness), Red, Cyan, Green and Combinations of $G{\leftrightarrow}B$ Colors are free, controlling and extent of effect was excellent. On the contrary, in the case of Yellow and Magenta and Combinations of $R{\leftrightarrow}B$, they are gentle and arouse the protective instinct or feminine distribution chart has shown. Fourth, it showed difference of preference that difference of select ratios of both men and women in Orange, Blue, Greenish-Yellow (preference of man) and Magenta, Combinations of $R{\leftrightarrow}B$ Colors(preference of woman).

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.1
• /
• pp.83-90
• /
• 2019

LED lighting is spreading on the strength of LED lighting, and various government policies are being implemented. VLC research which is a wireless communication technology using lighting has been actively conducted, and it has been proven through many studies that a general LED light source such as a high-speed data transmitter can be used. But from now on, one of the main problems is the noise from side lights, which can be compared to the noise of radio broadcasts. So in this paper, we proposed a noise canceling model to remove the interference of ambient light by using an optical filter for a detachable VLC channel. In order to verify the proposed model, various high brightness RGB LED modules were used for comparative analysis. In addition, the applicability was verified through experiments using High Luminance LED lighting which is applied in real life.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2317-2322
• /
• 2010

Market for LED lights as a newly-growing industry has been growing, and secureness of high efficiency and long life through optimal thermal design are crucial for further popularization. In this study, considerable improvement in thermal performance for a 10W LED light has been done compared to a previous model. For this, numerical model has been established through experiments and used to optimize design factors in heat release such as fin shape, PCB kind or LED number etc. Furthermore, prototype of a LED light has been made and the improved thermal performance was verified with heat release experiments.

• Journal of Power Electronics
• /
• v.16 no.2
• /
• pp.815-822
• /
• 2016

The efficiency of light-emitting diode (LED) devices is a significant factor that reflects the capability of these devices to convert electrical power into optical power. In this study, a method for estimating the efficiency of LED devices is proposed. An efficiency model and a heat power model are established as convenient tools for LED performance evaluation. Such models can aid in the design of LED drivers and in the reliability evaluation of LED devices. The proposed estimation method for the efficiency and heat power of LED devices is verified by experimentally testing two types of commercial LED devices.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.6
• /
• pp.506-511
• /
• 2017

LED lighting, which many companies are pursuing commercialization, is a representative green energy technology. However, the LED lighting for broadcasting image should have high output and easy portability compared with general LED lighting devices for street lamps, advertisement or transportation devices. Therefore, while shooting a broadcast image if you use LEDs as a substitute light source for halogen lamps and fluorescent lamps that are large in size and uncomfortable to handle it is expected that the lightening of the equipment will activate the broadcasting image lighting equipment industry. After considering the mass production of the LED module board and the SMT production size of the chip mounter, the board size was determined considering the overall size of the product by model. In this paper, four 20W LED boards are arranged vertically in order to produce an 80W board. In other words, by sharing LED module board size by model, high power LED lighting equipments of 120W and 200W can be selected as an increase in the number of boards.

• Journal of Applied Reliability
• /
• v.13 no.2
• /
• pp.117-127
• /
• 2013

In this paper, we studied the correlation between the activation energy($E_a$) of the raw materials and the structural characteristics of the White LED PKGs. The samples used in the study were composed of low power LED 3type and high power LED 5type. To calculate the activation energy($E_a$) of the White LED PKGs conducted three conditions of high temperature operation test based on the Arrhenius model. The number of samples used in the experiment is 10, respectively. The $T_j$ of Conditions and target specifics expressed $T_{j1}$, $T_{j2}$, $T_{j3}$. The activation energy ($E_a$) of the samples was calculated based on the value of the actually measured lifetime. We investigated the correlation between the activation energy ($E_a$) of the raw materials and the structural characteristics of the White LED PKGs. As a result, White LED PKGs activation energy($E_a$) value was confirmed that the material properties affected more than the structural characteristics of the LED PKGs and we found that activation energy of each LED Model has difference. Normally, The activation energy of phosphor of YAG type was indicated from 0.21 to 0.25[eV] and Silicate type was indicated from 0.12 to 0.16[eV]. According to the results, we confirmed that the activation energy of phosphor of YAG type is higher more than The activation energy of phosphor of Silicate type.

• Journal of Korea Game Society
• /
• v.17 no.3
• /
• pp.45-52
• /
• 2017

This paper proposes a new strategy of emotion-based music visualization. Emotional LED lighting control system is suggested to help audiences enhance the musical experience. In the system, emotion in music is recognized by a proposed algorithm using a dimensional approach. The algorithm used a method of music emotion variation detection to overcome some weaknesses of Thayer's model in detecting emotion in a one-second music segment. In addition, IRI color model is combined with Thayer's model to determine LED light colors corresponding to 36 different music emotions. They are represented on LED lighting control system through colors and animations. The accuracy of music emotion visualization achieved to over 60%.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.3
• /
• pp.555-561
• /
• 2010

In this paper, the constant current controller is designed to regulate the driving current of a power LED. The controller design model of the power LED including its driving circuit is proposed to design the constant current controller. A buck converter is also introduced to drive the power LED. The PI-based digital controller is implemented to validate the proposed strategy for the power LED driving.

• Journal of Korean Society for Quality Management
• /
• v.50 no.3
• /
• pp.349-371
• /
• 2022

Purpose: Compared to the rapid growth rate of the domestic automotive LED industry so far, the predictive analysis method for demand forecasting or market outlook was insufficient. Accordingly, product characteristics are analyzed through the life trend of LEDs for automotive exterior lamps and the relative strengths of p and q using the Bass model. Also, future demands are predicted. Methods: We used sales data of a leading company in domestic market of automotive LEDs. Considering the autocorrelation error term of this data, parameters m, p, and q were estimated through the modified estimation method of OLS and the NLS(Nonlinear Least Squares) method, and the optimal method was selected by comparing prediction error performance such as RMSE. Future annual demands and cumulative demands were predicted through the growth curve obtained from Bass-NLS model. In addition, various nonlinear growth curve models were applied to the data to compare the Bass-NLS model with potential market demand, and an optimal model was derived. Results: From the analysis, the parameter estimation results by Bass-NLS obtained m=1338.13, p=0.0026, q=0.3003. If the current trend continues, domestic automotive LED market is predicted to reach its maximum peak in 2021 and the maximum demand is $102.23M. Potential market demand was $1338.13M. In the nonlinear growth curve model analysis, the Gompertz model was selected as the optimal model, and the potential market size was $2864.018M. Conclusion: It is expected that the Bass-NLS method will be applied to LED sales data for automotive to find out the characteristics of the relative strength of q/p of products and to be used to predict current demand and future cumulative demand.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.717-721
• /
• 2008

This paper proposes an image system that can efficiently measure the spectral reflectance of a scene using RGB cameras and LED light sources. Multispectral imaging system is composed of LED controllers, LED clusters and RGB cameras. It captures full-spectral images at real-time. The system adopts a simple, empirical linear model to estimate the full spectral reflectance at each pixel. Since the model is linear, the reconstruction is efficient and stable. We estimated the spectral reflectance of various scenes using the system and showed the effectiveness of the proposed system.