• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1268-1276
• /
• 2016

A triode for alternating current (TRIAC) dimming light emitting diode (LED) driver, which adopts a variable switched capacitor for LED dimming and LED power regulation, is proposed in this paper. The proposed LED driver is power efficient, reliable, and long lasting because of the TRIAC switch that serves as its main switch. Similar to previous TRIAC dimmers for lamps, turn-on timing of a TRIAC switch can be controlled by a volume resistor, which modulates the equivalent capacitance of the proposed variable switched capacitor. Thus, LED power regulation against source voltage variation and LED dimming control can be achieved by the proposed LED driver while meeting the global standards for power factor (PF) and total harmonic distortion (THD). The long life and high power efficiency of the proposed LED driver make it appropriate for industrial lighting applications, such as those for streets, factories, parking garages, and emergency stairs. The detailed analysis of the proposed LED driver and its design procedure are presented in this paper. A prototype of 80 W was fabricated and verified by experiments, which showed that the efficiency, PF, and THD at V_s = 220 V are 93.8%, 0.95, and 22.5%, respectively; 65 W of LED dimming control was achieved with the volume resistor, and the LED power variation was well mitigated below 3.75% for 190 V < V_s < 250 V.

• Korean Chemical Engineering Research
• /
• 제52권1호
• /
• pp.8-16
• /
• 2014

미세조류는 이산화탄소를 제거하고 산업적으로 유용한 다양한 이차 대사물질을 생산해 내는 광합성 미생물로 생물산업분야에서 주목 받고 있는 유용한 자원이다. 이러한 미세조류를 실내에서 효과적으로 배양하기 위해서는 무엇보다도 효율적인 광원이 필수적이다. 최근 발달하는 LED광원은 광원의 크기가 작고, 에너지 효율이 우수하며, 특정 파장만 조사할 수 있다는 점 등의 다른 인공광원과 차별되는 많은 장점을 가지고 있다. LED광원을 미세조류의 배양에 적용하는 연구는 최근에 와서야 점차 시도되고 있는 실정이며, 아직까지 실험실 규모의 실험과 대표적인 특정 종 위주의 결과들만 나오고 있어, LED광원을 미세조류의 산업적인 배양에 적용하기 위해서는 더 많은 세부적인 연구 결과가 요구된다. 하지만 LED 조명을 미세조류 배양 분야에 적용하는 것은 효과적인 접근으로 생각되며, BT(Bio Technology) 산업에 새로운 지평을 열 것으로 생각된다. 따라서 본고에서는 최근 연구되고 있는 LED광원을 이용한 미세조류의 배양 현황 및 그 가능성에 대해서 조사하고, 향후 나아갈 방향에 대해서 기술해 보았다.

• 한국물환경학회지
• /
• 제29권2호
• /
• pp.270-275
• /
• 2013

The aim of this study was to investigate the efficiency of thickness of optical panel (OP) on the growth rate of Chlorella vulgaris. The size of Chlorella vulgaris (FC-16) was $3-8{\mu}m$, having round in shape. The cells of Chlorella vulgaris was cultured in the Jaworski's Medium with deionized water at $22^{\circ}C$ for 15 days. For this experiment, three OP samples were prepared to evaluate the efficiency of thickness of OP on the growth rate of Chlorella vulgaris; 4 mm OP with LED (Light Emitting Diode) (Run 1), 6 mm OP with LED (Run 2) and 8 mm with LED (Run 3). The diffuse rate was reached 86%, 91% and 92% for Run 1, Run 2 and Run 3, respectively. Average biomass of Run 2 and Run 3 were measured 11.18% higher than that of Run 1. However, the specific growth rate for all fractions were almost same. In addition, chlorophyll content per cell and cell volume were found to be slice difference between Run 2 and Run 3. Therefore, Run 2 has more effect on growth rate of biomass for Chlorella vulgaris than Run 1 and Run 3.

• 전기전자학회논문지
• /
• 제17권3호
• /
• pp.221-228
• /
• 2013

About functional parameters of a LED/UVLED (Light Emitting Diode/Ultra Violet LED), one of the most important parameters is the I-V characteristic. By researching factors affect to the I-V characteristic of uvled, we found that beside of the structure of the device itself, there is the influence of the electrode materials, electrode shapes, the process of wiring and packaging. In this work, we want to improve the performance of UVLED to find out the optimal mask design principles. The study is based on theoretical mathematical models, as well as the use of simulation software tool Comsol. From all results obtained, the team has improved mask design to manufacture electrodes for GaN-based UVLED. Electrode masks are designed by three softwares, which are Intellisuite, Klayout and AutoCad. Intellisuite masks would be used in fabrication simulation while Klayout and AutoCad are used to fabricate electrodes in experiments. As well as, we silmulated the structure of an uvled 355nm emission wavelength by TCAD software, in order to compare with uvled sample that has the same emission wavelength.

• 대한임상검사과학회지
• /
• 제43권3호
• /
• pp.124-132
• /
• 2011

The aim of this study was to evaluate the effects of the photosensitizer photogem with light-emitting diode (LED) on vancomycin-resistant enterococci (VRE). Two VRE strains isolated from the feces of patients. that was identificated Enterococcus faecium (vanA) and Enterococcus gallinarum (vanC1) using traditional biochemical tests and confirmed VRE genotyping from using polymerase chain reaction. In addition, three strains were used Enterococcus. faecalis CDC-286 (vanA), E. faecalis CDC-583 (vanB) and E. gallinarum CDC-42 (vanC1). To examine the antimicrobial effect of photogem mediated photodynamic therapy (PDT) against, CFU quantification and Disk diffusion antimicrobial susceptibility test were evaluated. The effects of Photodynamic therapy was not associated with genotype. Photogem mediated PDT perfectly inhibited the colony formation of E. faecalis CDC-286. The number of viable bacteria decreased greatly after PDT application with photogem $50{\mu}g/mL$ and energy density of $15J/cm^2$. The diameter of inhibition zone was increased to after PDT more than before PDT. The case of vancomycin disc on E. faecalis CDC-583 and E. galinanum-Patient were changed from resistant to intermediate resistant, from intermediate resistant to susceptable. These results demonstrate that lethal photosensitization of VRE can be achieved using photogem plus 630 nm LED irradiation.

• 센서학회지
• /
• 제27권1호
• /
• pp.6-12
• /
• 2018

In this paper, a 32-variable pulse position modulation (32-VPPM) scheme is proposed to support a red-green-blue light-emitting-diode (RGB-LED)-based optical camera communication (OCC) system. Our proposed modulation scheme is designed to enhance the OCC data transmission rate, which is targeted for the wearable biomedical data monitoring system. The OCC technology has been utilized as an alternative solution to the radio frequency (RF) wireless system for long-term self-healthcare monitoring. Different biomedical signals, such as electrocardiograms, photoplethysmograms, and respiration signals are being monitored and transmitted wirelessly from the wearable biomedical device to the smartphone receiver. A common 30 frames per second (fps) smartphone camera with a CMOS image sensor is used to record a transmitted optical signal. Moreover, the overall proposed system architecture, modulation scheme, and data demodulation are discussed in this paper. The experimental result shows that the proposed system is able to achieve > 9 kbps using only a common smartphone camera receiver.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.59-59
• /
• 2007

최근 GaN계 LED를 대체할 만한 물질로 주목받고 있는 ZnO는 단결정 박막성장의 어려움, 동일접합 LED 소자구현을 위한 p-ZnO 성장의 어려움 3원계 합금제작의 어려움 등으로 소자제작에 있어 고전을 하고 있다. 특히 이러한 문제점을 극복하고자 하는 방안으로 양자 제한 효과, 탁월한 결정성, self-assembly, internal stress 등의 새로운 기능성을 지닌 ZnO 나노구조가 제시되었다. 하지만 나노구조를 이용한 다이오드 제작에서도 금속전극의 접합이라는 문제의 벽에 가로막혀 있다. 본 실험에서는 자체 개발된 MOCVD 장비를 이용한 일차원 ZnO 나노선을 성장한 이후 연속적으로 박막을 성장하여 금속전극의 접합을 시도하였다. 이종접합구조 뿐만 아니라 일차원 및 이차원 구조의 복합구조는 일반 다결정 박막보다 결정성에서 우수한 특성을 보였으며, 다이오드 제작시에 높은 효율을 보였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2021년도 추계학술대회
• /
• pp.397-399
• /
• 2021

본 논문에서는 폐암 세포 증식을 억제하기 위해 멀티모달 시스템 개발에 관한 기본연구를 수행하였다. 광 자극 시스템과 특정한 주파수를 발생시키는 초음파를 이용하여 폐암 세포를 대상으로 자극을 인가하였고, 세포의 증식 억제 효과를 영상화하여 정량적으로 평가하였다. 실험 결과, 초음파와 LED 단일 자극을 인가하였을 때와 동시에 인가하였을 때 폐암 세포의 증식률에서 의미 있는 결과를 보였다.

• 한국세라믹학회지
• /
• 제56권1호
• /
• pp.71-76
• /
• 2019

Monochromatic amber phosphor in glasses (PiGs) for automotive LED applications were fabricated with $YAG:Ce^{3+}$, $CaAlSiN_3:Eu^{2+}$ phosphors and Pb-free silicate glass. After synthesis and thickness-thinning process, PiGs were mounted on high-power blue LED to make monochromatic amber LEDs. PiGs were simple mixtures of 566 nm yellow YAG, 615 nm red $CaAlSiN_3:Eu^{2+}$ phosphor and transparent glass frit. The powders were uniaxially pressed and treated again through CIP (cold isostatic pressing) at 200 MPa for 20 min to increase packing density. After conventional thermal treatment at $550^{\circ}C$ for 30 min, PiGs were applied by using GPS (gas pressure sintering) to obtain a fully dense PiG plate. As the phosphor content increased, the density of the sintered body decreased and PiGs containing 30 wt% phosphor had full sintered density. Changes in photoluminescence spectra and color coordination were investigated by varying the ratio of $YAG/CaAlSiN_3$ and the thickness of the plates. Considering the optical spectrum and color coordinates, PiG plates with $240{\mu}m$ thickness showed a color purity of 98% and a wavelength of about 605 nm. Plates exhibit suitable optical characteristics as amber light-converting material for automotive LED applications.

• 대한소아치과학회지
• /
• 제36권2호
• /
• pp.189-198
• /
• 2009

본 연구는 복합 레진이 광원을 향해 수축이 일어난다는 점에 착안하여 중합 수축시 필연적으로 발생되는 치질과의 결합단절을 개선하고자 double light emitting diode(LED) system을 고안하였으며, 중합 수축 시 발생하는 스트레인의 변화를 기록하고 미세 누출의 양상을 관찰하여 비교 분석한 결과 다음과 같은 결론을 얻었다. 1. 스트레인의 변화를 살펴보면, single LED system과 double LED system에서 광중합 개시와 함께 급격히 증가하였다가 시간이 지남에 따라 서서히 감소하는 유사한 수축 응력 양상을 보였다. 2. 최대 응력의 발생과 유지는 double LED system보다 single LED system에서 더 높게 나타났다(p<0.05). 3. Double LED system이 single LED system보다 미세 누출이 더 낮게 나타났다(p<0.05). 이상의 결과를 종합해보면, single LED system에 비해 double LED system에서 중합 수축 응력이 크지 않고 미세 누출도 줄일 수 있어 임상에서 매우 유용한 장비로 사용될 수 있으리라 생각된다. 그러나 두 개의 광원이 구강내에서 원활하게 움직이기 위해서는 광원의 크기가 충분히 작아야 한다. 현재 개발된 LED는 광량이 충분하지 않아 시술 시간의 단축을 원하는 소아 환자의 접착 수복에서는 어려운 실정이다. 따라서 수복물의 완전한 중합과 중합 시간의 감소를 위해 더 높은 출력의 광원이 필요하고, 이는 LED광원의 발달에 기대해 볼 수 있으리라 사료된다.