• Journal of Digital Contents Society
• /
• v.8 no.4
• /
• pp.425-430
• /
• 2007

Depends on the running dry of the radio resources for the next generation of wireless communication system the estimated possibilities of the visible light which used for the devices such as signal light, the electric display board, guide board and so on applied for the next generation wireless network is the topic to be explored in this paper. Since radiation efficiency utilization for the wireless network has its capacity to become a trend direction we will study also on its application as well as the technique standardization.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.176-177
• /
• 2011

현재, 해양 선박의 경우 주간에는 육안을 통하여 쉽게 항구를 찾아 쉽게 선박을 정박시키거나 출항을 할 수 있지만, 사람의 시야를 확보할 수 없는 야간의 경우에는 선박의 전자 장비에 의존하거나 해상위에 떠 있는 해상 유도 표시등을 이용하여 선박을 정박시키거나 출항을 하고 있다. 또한, 현재의 많은 해상 유도 표시등은 GPS를 사용하여 제품을 설계하고 있지만, 시간에 따른 점멸 제어에 대한 오차가 누적되어 일정시간의 경과 후에는 유도등의 동기화에 많은 문제가 발생하고 있는 실정이다. 본 논문에서는 야간에 선박의 안전한 출항과 정박의 안내를 위하여 해상 유도 표시등의 동시 점멸에 관한 논문으로 PGS 시간 정보 데이터를 이용하여 일정시간이 흘러간 뒤에도 유도등의 점멸 제어 누적 오차를 제거할 수 있는 알고리즘을 개발하여 기존의 제품을 보완할 수 있는 알고리즘을 제안하고 그 성능을 실험을 통하여 제시하고자 한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.31-33
• /
• 2022

등부표는 소형 어선을 포함한 선박의 항로표지에 중요한 역할을 한다. 그러나 야간에 어두워지면 해상에 설치된 등부표의 위치나 번호판 식별이 어려워 소형 어선이나 선박이 등부표에 가까이 접근하는 경우 등부표를 미처 발견하지 못하고 충돌하여 선박이 파손되거나 인명사고가 발생한다. 이 연구에서는 소형 어선이나 선박이 야간에도 등부표의 위치와 번호판을 쉽게 식별할 수 있도록 등부표에 조명장치를 구비하여 충돌사고의 예방과 항로표지서비스를 향상시키는 방법을 분석하고 고안하여 태양광전원을 이용한 방수형 LED조명과 통신모듈IoT를 결합하여 원격디밍 RGB제어 및 조명자가진단기능을 갖추어 야간에 시인성을 높이는 등부표의 윤곽표시조명을 개발하였다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.11-14
• /
• 2009

색이란 빛의 스펙트럼 분포에 의하여 눈이 느끼는 지각이고, 삼자극치에 의하여 수치화된 색자극의 표시이다. 이때 삼자극치란 사람의 눈의 중심와 부분에 분포하는 3가지 추상체에 의하여 뇌로 전달되는 색의 정보를 수치화한 것이다. 삼자극치를 이용하면 색을 수치로 나타낼 수 있고, 색을 객관적으로 측정할 수 있다. 본 논문에서는 LED의 광량 제어에 디지털 방식을 이용한 full color LED 램프의 이론적인 색채연구를 위하여 분광분포를 이용한 삼자극치를 구하는 과정에 대하여 논하였다. 또한 구해진 삼자극치로부터 색도좌표를 구하는 과정을 모델링하였고, 실제로 측정된 색도좌표와의 오차를 계산하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.2
• /
• pp.123-129
• /
• 2009

In this study, SMPS to drive LED traffic signal light for the railroad and airport was designed and its electrical characteristics was measured. The output voltage, output current and its power efficiencies to the input voltage 8~12VAC and 8~16VDC were 6VDC, 1.85ADC and >70%, respectively. Also the power factors of the SMPS were above 0.75 in the AC input voltage range.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.294-298
• /
• 2000

As the LED or LCD technology has been developed, if we use LED or LCD pannel, more wide color range coluld be obtained as CRT monitor. Specially, full color LED display is developed by high brightness blue LED. It can be applicable to display pannel with a long-life, wide visible angle and high brightness. A display pannel shows the images of CRT monitor performed by the main computer. Graphic application in the main computer is therefore more important in the market. Conventional 3D STUDIO, one of graphic softwares, has difficulties in manipulating and understanding the specific terminology so that one may need more time to learn it. We, therefore, developed graphic application which can recycle the conventional 3D images by creating or editing the image easily.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.386-389
• /
• 2016

The number of cyclists is on the steady growing for leisure, sports and transportation with the increasing interest in health and environment. However, the number of cycling accidents is also increasing steadily due to the lack of safety awareness and regulations. Focusing on these issues, we propose and develop the smart LED cycling helmet in order to reduce a risk of cycling accident. To provide the motion information of the bicycle for others, we attach the LEDs on the helmet and control the LED lights using Arduino. The motion information is displayed on the LED helmet by using sensors of the smartphone. Communication between Arduino and the smartphone is performed through Bluetooth.

• Journal of Digital Convergence
• /
• v.14 no.1
• /
• pp.181-187
• /
• 2016

Typical Retro-reflectors installed on road have problems such as limiting a driver's visibility at night when it is foggy or rainy. On the other hand, LED illuminated studs, called cat's eye system, extends a driver's visibility under these conditions. In this paper, we present a design of the LED cat's eye system using solar energy that can sustain vehicles with about 30-ton weight and is compliant with the IP68 code for water proof as IEC standard 60529. In addition, we propose a scheme of designing a LED driving circuit consuming low power to take into accounts cold weather or rainy season with limited sunlight. This LED cat's eye studs is currently installed and used on expressway and bike route nationally as well as overseas.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.3
• /
• pp.439-444
• /
• 2011

In this paper, we implemented the intelligent smart monitor system for next generation which is most commonly viewed information in a vehicle from the instrument cluster, where speed, tachometer, fuel, engine temperature, fuel gauge, turn indicators and warning lights and provide the driver with an array of informations. Designed Smart HUD(Head-Up-Display) monitor system is composed TFT LCD, LCD Back light led, plane mirror, lens and controllers parts and it was assembled to intelligent integrated smart monitor system. Finally, we analyze intelligent integrated smart monitor system for driver safety vehicles and present the possibility to apply to smart intelligent HUD total monitor system for next generation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4483-4488
• /
• 2010

In comparison with some other light sources, LED has merits such as long lifetime, pollution free, and high energy efficiency. Lately, due to development of LED with high brightness and capacity, LED, which has been applied in display system only, has applied in the field of lighting system. Driving current of power LED has to be controlled below the designed value. In this paper, half-bridge LLC series resonant converter, which has the current limiting function, has been described. Half-bridge LLC series resonant converter allows in relatively wide input voltage and output load range when compared to the other resonant converter. Also, it is possible to reduce a magnetic component, because leakage inductance of transformer is used as a resonant inductance. It has been validated by designing and testing 200[W] half-bridge LLC converter of DC24[V] output voltage for LED lamp driver, which includes a current limiting function and power factor correction(PFC) function.