• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.1079-1080
• /
• 2008

To improve productivity of TFT-LCD and PDP, it is required that the inspection system of flat glass should be established. It is composed of robot arms, base table, and laser sensors. This paper focuses on three non-contact laser sensors. After testing three laser sensors, LG-G30 is selected.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.221-224
• /
• 2003

Recently, the market share of the thin-film-transistor liquid-crystalline-display (TFT-LCD) is growing rapidly in display device market. The backlight unit is used as a light source of TFT-LCD module. A light-guide is one of several important components of backlight unit. The manufacturing technology and optical system design of the light guide is very sensitive to quality and cost of the TFT-LCD module. In the present study a new manufacturing method which is called as direct surface forming(DSF) has been tested under various conditions. The result of this test, V-groove pattern shows different shapes depends on the temperature of mold surface, contact time of mold and depth of V-groove.

• Journal of Korean Vacuum Science & Technology
• /
• 제3권2호
• /
• pp.101-106
• /
• 1999

The main consideration factor to design a magnetron of the sputtering system for TFT-LCD metallization is high sheet resistance (Rs) uniformity which is provided by the high target erosion and high current efficiency. The present study has developed a rectangular magnetron for TFT-LCD to bve considered full target erosion and high film uniformity. After an aluminum-2 at.% and alloy target was installed in a magnetron source and the film was deposited on the glass of 600${\times}$720 mm, the Rs uniformity of the deposited film was measured as functions of the magnet tilt and magnet scanning configuration. And the target erosion profile was observed with the target voltage. When sputtered at 4mtorr and 10kW, the magnet tilt for the high Rs uniformity of 8.38% was 7mm. The plasma voltage at the dwell home and end for full-face target erosion, when scanned the magnetron was 120% compared to the mean voltage of the other area.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.183-188
• /
• 2005

본 논문은 대면적 LCD 기판에서의 hillock 의 특성 및 억제 방법을 제안한다. pure-Al 의 thickness 에 따른 hillock의 발생개수는 감소 하며 size는 증가하는 경향을 나타낸다. 이는 pure-Al 의 grain size가 thickness에 따라 증가하며 즉 grain size가 커질 수 록 발생 hillock의 size는 증가 한다는 것을 알 수 있다. hillock 억제 방안으로 Mo capping을 제안 하며 이에 대한 Modeling 및 효과 파악 결과 pure-Al $2500{\AA}$에 Mo $500{\AA}$ capping시 pure-Al의 hillock을 억제 한다는 신뢰성 있는 결과를 얻을 수 있었다 이에 대한 이론적 Modeling은 Chaudhari's Model을 modify하여 사용 하였다. 그 외 sputter온도에 따라 hillock 발생 개수가 증가 함을 관찰 하였다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2006년도 추계학술발표논문집
• /
• pp.257-260
• /
• 2006

본 논문에서는 TFT-LCD 패널용 석영유리기판을 제작하여 투과율, OH함량, OH농도분포, 점도, 열팽창계수 등에 대한 특성 평가를 하였다. 그 결과 고온 poly-Si TFT-LCD용 기판으로의 사용 가능성을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.177-180
• /
• 1999

In this paper, we studied Surface Discharge Type Flat Fluorescent Lamp(FFL) with High Luminance for LCD Backlighting. This lamp is Surface Discharge Type structure with a pair of Sodalime glass, insulator layer, phosphor layer, and Xe gas gap. There are two influences of Electric field on different dielectric thickness. The Electric field difference at the dielectric layer itself enhances minimum value of firing voltage and luminance uniformity. So, we measured the Electric filed at 0.5mm, 1mm gap length and discharge voltage for difference dielectric layer thickness. In experiment result, the thicker dielectric layer has higher firing voltage and lower current.

• 한국레이저가공학회지
• /
• 제10권2호
• /
• pp.5-15
• /
• 2007

A new printing process for LCD color filter is proposed in this work by using the localized laser heating, which is called laser-induced spray printing (LISP) process. The LISP is a non-contact process, which injects the ink from the donor substrate to the glass substrate by the bubble pressure induced by laser heating. The temperature distribution of the donor substrate is calculated numerically to explain the ink ejection phenomena. The composition of the ink was includes the red pigment, n-butanol, xylene, BCA and epoxy. Experiments were conducted by using the fiber laser system, and the color filter patterns were deposited successfully under the proper laser heating conditions.

• 한국산학기술학회논문지
• /
• 제20권6호
• /
• pp.272-277
• /
• 2019

본 논문에서는 옥외용 디스플레이의 눈부심 방지 강화유리 생산 방법을 제안하였다. 일반적으로 옥외용 디스플레이를 위한 커버글라스의 주요 사양은 내강도와 눈부심 방지이다. 내강도는 커버글라스를 고온로에서 열처리한 강화유리를 사용하여 그 요구 사양을 만족시키고 눈부심 방지를 위해서는 AG(Anti-Glare)필름을 강화 유리에 접착하여 주로 사용한다. 그러나 필름 형태의 눈부심 방지기술은 PET 필름자체의 내마모성이 3H정도로 취약하여 AG 성능이 지속적으로 유지되기 어렵다. 따라서 본 논문에서는 AG 필름이 가지는 내구성의 단점을 보완하고 기존 강화유리 생산 공정을 이용하는 눈부심 방지 기술을 제안하였다. 제안된 눈부심 방지 코팅은 ZBS ($ZnO-B_2O_3-SiO_2$) 분말을 유리 표면에 도포하고 강화공정을 수행하여 내구 강도와 눈부심 방지 성능을 높일 수 있도록 하였다. ZBS 분말을 유리 표면에 도포하기 위해서는 스크린 프린팅 공정을 이용하여 분말이 유리표면에 균일하게 도포되도록 하였다. 스크린 프린팅 시 고려되어야 하는 주요 변수는 분말을 희석하기 위한 오일의 농도와 메쉬 오프닝 사이즈이다. 이 두 변수의 설정에 따라 스크린 프린팅 공정에서 도포되는 ZBS 분말의 양이 조절되므로 이에 대한 상관관계를 실험을 통해 규명하였다. 제안된 제조 방법의 성능을 평가하기 위해 상업용 시장에서 널리 사용되는 haze, 표면 거칠기 및 투과도를 성능 지표로 선정하였고 눈부심 방지를 위해 일반적으로 사용되는 AG필름과 비교하여 그 성능을 검증하였다. 비교 결과 제안된 제조 방법에 의한 강화유리의 투과도는 AG필름의 89.5%보다 다소 감소한 83.1%이지만 막강도는 7H로 두배 이상 향상됨을 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.186-186
• /
• 2000

After LeComber et al. reported the first amorphous hydrogenated silicon (a-Si: H) TFT, many laboratories started the development of an active matrix LCDs using a-Si:H TFTs formed on glass substrate. With increasing the display area and pixel density of TFT-LCD, however, high mobility TFTs are required for pixel driver of TF-LCD in order to shorten the charging time of the pixel electrodes. The most important of these drawbacks is a-Si's electron mobiliy, which is the speed at which electrons can move through each transistor. The problem of low carier mobility for the a-Si:H TFTs can be overcome by introducing polycrystalline silicon (poly-Si) thin film instead of a-Si:H as a semiconductor layer of TFTs. Therefore, poly-Si has gained increasing interest and has been investigated by many researchers. Recnetly, fabrication of such poly-Si TFT-LCD panels with VGA pixel size and monolithic drivers has been reported, . Especially, fabricating poly-Si TFTs at a temperature mach lower than the strain point of glass is needed in order to have high mobility TFTs on large-size glass substrate, and the monolithic drivers will reduce the cost of TFT-LCDs. The conventional methods to fabricate poly-Si films are low pressure chemical vapor deposition (LPCVD0 as well as solid phase crystallization (SPC), pulsed rapid thermal annealing(PRTA), and eximer laser annealing (ELA). However, these methods have some disadvantages such as high deposition temperature over $600^{\circ}C$, small grain size (<50nm), poor crystallinity, and high grain boundary states. Therefore the low temperature and large area processes using a cheap glass substrate are impossible because of high temperature process. In this study, therefore, we have deposited poly-Si thin films on si(100) and glass substrates at growth temperature of below 40$0^{\circ}C$ using newly developed high rate magnetron sputtering method. To improve the sputtering yield and the growth rate, a high power (10~30 W/cm2) sputtering source with unbalanced magnetron and Si ion extraction grid was designed and constructed based on the results of computer simulation. The maximum deposition rate could be reached to be 0.35$\mu$m/min due to a high ion bombardment. This is 5 times higher than that of conventional sputtering method, and the sputtering yield was also increased up to 80%. The best film was obtained on Si(100) using Si ion extraction grid under 9.0$\times$10-3Torr of working pressure and 11 W/cm2 of the target power density. The electron mobility of the poly-si film grown on Si(100) at 40$0^{\circ}C$ with ion extraction grid shows 96 cm2/V sec. During sputtering, moreover, the characteristics of si source were also analyzed with in situ Langmuir probe method and optical emission spectroscopy.

• 대한기계학회논문집B
• /
• 제33권11호
• /
• pp.886-893
• /
• 2009

To develop glass panel vacuum lift system for the post process in module line of FPD(Flat panel display) such as LCD and PDP, new vacuum adsorption parts of this system are proposed. These parts are composed of variable geometry configurations utilizing ceramic porous medium for variable size of glass panels. In order to design this device, detail understanding of flow phenomena in the flow path of vacuum adsorption system is essential. Thus, CFD analysis and designs are performed for several configurations in terms of pressure drop and balancing force at the adsorption side. From the result, new configuration is recommended for optimum design and manufacturing purpose.