• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.6
• /
• pp.411-420
• /
• 2021

In this paper, bidirectional LLC-LC resonant DC-DC converter with notch filters in the primary side of resonant circuits is proposed. Even if resonant capacitors are used on the primary and secondary sides, the proposed converter can operate with the high gain characteristics of the LLC resonant converter without mutual coupling of resonant capacitors, regardless of the direction of power flow. In addition, by applying notch filters, the proposed converter can operate with a wider gain control range and can cope with overload and short circuit. The analysis and operating characteristics of the proposed bidirectional LLC-LC resonant converter are investigated. A 3.3 kW prototyped bidirectional LLC-LC resonant converter connected to 750 V_DC buses is designed and tested to verify the validity and applicability of this proposed converter.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.1
• /
• pp.21-25
• /
• 2006

In this study, liquid crystal (LC) aligning properties for homeotropic alignment on the $SiO_x$ thin film by electron beam evaporation method with electron beam system in accordance with the evaporation angles were investigated. Also, the control of pretilt angles homeotropic aligned LC on $SiO_x$ thin film as the function of the evaporation angles were studied. The uniform vertical LC alignment on the $SiO_x$ thin film surfaces with electron beam evaporation was achieved with all of the thin film angle conditions. It is considerated that the LC alignment on the $SiO_x$ thin film by electron beam evaporation is attributed to elastic interaction between LC molecules and micro-grooves at the $SiO_x$ thin film surface created by evaporation. The values of the pretilt angles according to the evaporation angle were from about $0.7^{\circ}$ to about $3.4^{\circ}$. The highest pretilt angles of about $3.4^{\circ}$ in aligned NLC on the $SiO_x$ thin film surfaces by electron beam evaporation were measured under the condition of $45^{\circ}$. Also, good LC alignment states on the treated $SiO_x$ thin film layer by electron beam evaporation were observed at annealing temperature of $250^{\circ}C$. Consequently, the high pretilt angle and the good thermal stability of LC alignment on the $SiO_x$ thin film by electron beam evaporation can be achieved.

• Korean Journal of Optics and Photonics
• /
• v.21 no.2
• /
• pp.69-73
• /
• 2010

We propose a method to enhance the response time of a twisted nematic liquid crystal (TN-LC) cell using an anisotropic polymer. Polymer networks are formed by the phase separation between a LC and a UV-curable polymer. A TN-LC cell is exposed to UV light after the mixture of LC and anisotropic polymer is injected into the TN-LC cell. As a result, turn-off time of a TN-LC cell can be decreased remarkably without any loss of the transmittance. The turn-off time of a TN-LC cell with pure LC was 16 ms, but those of polymer networked TN-LC cells were 12, 11, and 9 ms when the concentration of the polymer was 3, 5, and 10 wt%, respectively. Moreover, by virtue of the polymer network, the backflow effect and the delay time generated during the turn-off process disappeared.

• Analytical Science and Technology
• /
• v.25 no.6
• /
• pp.435-440
• /
• 2012

A liquid chromatography-electrospray ionization-tandem mass spectrometry method (LC-ESI-MS/MS) was used for determining perchlorate in the Gum-River surface water. Sample was directly injected into LC-ESI-MS/MS after the filtrations using PTFE filter paper. The coefficient of variation of perchlorate was less than 3% and the limit of quantification was 0.17 ${\mu}g/L$. Water samples were collected from thirty-five basins of Gum-River on February, April and June 2012, respectively. As a result, perchlorate was detected in the concentration range of 0.23-3.73 ${\mu}g/L$ (mean 0.20 ${\mu}g/L$) in the frequency of 15% in general surface water and in the concentration range of 0.36-25.10 ${\mu}g/L$ (mean 1.69 ${\mu}g/L$) in the frequency of 36% in surface water samples near industry area.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.1
• /
• pp.86-92
• /
• 2012

To promote the practical use of livestock manure compost (LC) for paddy rice cultivation, the fertilization efficiency of nutrients in LCs was investigated compared to that of chemical fertilizer. This experiment was conducted at rice field in Hwaseong, Korea, with 6 treatments by each of 3 kinds of tested LCs, cattle manure compost (CaC), swine manure compost (SwC) and chicken manure compost (ChC). The treatments consisted of 3 application levels of LCs and 3 chemical fertilizer treatments having the same application levels with LCs. $NH_4$-N content in soil became higher according to the increase in the urea application rate, while it became lower in LC plots than in urea plots, and statistically had no significant difference among LC plots. There was a close relationship between phosphate fertilization rate and the increment of soil available phosphate content after experiment resulting y = 0.1788x - 6.169 ($R^2=0.9425$) when applied fused superphosphate fertilizer, and y = 0.0662x - 2.689 ($R^2=0.9315$) when applied LC at the equivalent rates to phosphate input (x: phosphate application rate, kg $ha^{-1}$, y: increment in soil available phosphate content, mg $kg^{-1}$). And from these two equations, the correlation on the phosphate application rate between fused superphosphate fertilizer and LC could be obtained as y = 2.7056x - 52.492 (x: $P_2O_5$ application rate of fused superphosphate, kg $ha^{-1}$, y: $P_2O_5$ application rate of LC, kg $ha^{-1}$). Plant height, number of tillers, nutrients uptake by rice, and rice yield showed higher levels in N 100% and N 150% application plots of chemical fertilizers, while every LC plots exhibited lower values and no significant difference among them. Relative nitrogen fertilization efficiencies of LCs compared to urea was 12.3% for CaC, 8.8 for SwC and 24.6 for ChC, respectively.

• Mass Spectrometry Letters
• /
• v.8 no.3
• /
• pp.49-52
• /
• 2017

Ibuprofen is one of the most popular analgesic and antipyretic drugs. An isotope dilution mass spectrometry method based on LC/MS was developed as a candidate reference method for the accurate determination of ibuprofen in pharmaceutical tablets. Isotope labelled ibuprofen, $ibuprofen-d_3$, was added as an internal standard into sample extracts. Ibuprofen and $ibuprofen-d_3$, was analysed by LC/MS in a selected ion monitoring (SIM) mode to detect ions at m/z 205 and 208, respectively. The repeatability and reproducibility of the developed ID-LC/MS method were tested for the validation and assessment of metrological quality of the method.

• Journal of Food Hygiene and Safety
• /
• v.6 no.3
• /
• pp.133-137
• /
• 1991

In order to increase the expression of XMP aminase [EC 6.3.4.1], which catalizes the conversion of 5'-XMP to the DNA fragment containing gua A gene coding for XMP aminase from pLC 34-10 plasmid was subcloned into pBR 322, and 1.7 kb gua A gene fragment was recloned under the control of trp promoter of pDR 720, E. coli expression vector. XMP aminase activity had increased by about 17 times when compared with that of the strain earring pLC 34-10.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.2
• /
• pp.219-226
• /
• 2020

Over the last decades, great efforts have been devoted to reuse industrial wastes and by-products from various industries as supplementary cementitious materials in order to reduce carbon dioxide(CO₂) emission by reducing the use of Portland cement in construction. Oyster shell waste, originating from the fishery industry, is available in huge quantities in certain areas, and is generally discarded or landfilled. In this study, we aimed to reuse oyster shell as an alternative to limestone in limestone calcined clay cement(LC³). The oyster shell calcined clay cement(OC³) paste were produced and were characterized via X-ray diffraction, isothermal calorimetry, compressive strength tests, and thermogravimetry. The results revealed that OC³ pastes exhibited similar strength development and reactivities by pozzolanic reaction with LC³, which implies that oyster shell could be used as a substitute for limestone in LC³.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.3
• /
• pp.23-31
• /
• 2018

This study was carried out to investigate the effects of livestock manure compost and fish-meal liquid fertilizer on the growth of cucumber and the soil properties for the stable production of organic cucumber. Cucumber was transplanted in greenhouse on the $6^{th}$ of April in 2017, and this experiment contained five treatments: livestock manure compost 100% (LC 100%), livestock manure compost 50% + fish-meal liquid fertilizer 50% (LC50 + LF50), livestock manure compost 50% (LC50), chemical fertilizer (NPK), and no fertilizer (NF). As a result, it was shown that soil chemical properties of LC50 + LF50 plot is not different from that of LC100 plot except for the EC content, but soil chemical properties of LC50 + LF50 plot is statistically significantly different from that of NPK plot except for pH. As a result of evaluating the functional diversity of soil microbial communities using Biolog system, the substrate richness (S) and the diversity index (H) were the highest in LC50 + LF50 plot. As a result of comparing the cucumber growth and yield, it was found that there was no statistically significant difference between the plant height and the fresh weight of LC100, LC50 + LF50, and NPK plot, but the plant height and the fresh weight of LC100, LC50 + LF50, and NPK plot were different from that of LC50 and NF plot. The yield of cucumber was the highest in NPK plot r(7,397 kg/10a), but there was no statistically significant difference in the yield of cucumber between NPK plot and LC100, LC50 + LF50 plot. The above-described results suggested that the livestock manure compost and fish meal liquid fertilizer can be used for organic cucumber production under greenhouse condition.

• Journal of Information Display
• /
• v.12 no.3
• /
• pp.121-124
• /
• 2011

The mechanism for lattice-shaped mura defects was proposed by characterizing the electro-optic properties of liquid crystal (LC), which showed different transmission properties between the normal and mura defect areas. An increase in the mura defect rate was observed when the dotted LC in the one drop filling (ODF) was exposed for a longer time. The dotted LC droplet at the edge evaporated more rapidly than that in the center. This resulted in a higher concentration of polar singles at the edge of the dotted LC droplet, leading to a higher ${\Delta}n$ value and higher transmittance. This implies that the reductio of the exposure time of the dotted LC to air plays a critical role in decreasing the occurrence of lattice-shaped mura defects in ODF.