• The Journal of Advanced Prosthodontics
• /
• v.9 no.3
• /
• pp.200-207
• /
• 2017

PURPOSE. In this study, three bioceramic materials, [IPS Empress CAD (Ivoclar), IPS e.max CAD (Ivoclar), and Lava Ultimate CAD (3M ESPE)] were treated with three commercial mouthrinses [Listerine, Tantum Verde, and Klorhex]; and changes in colour reflectance and surface roughness values were then quantitatively assessed. MATERIALS AND METHODS. One hundred and twenty ceramic samples, with dimensions of $2{\times}12{\times}14mm$, were prepared and divided into nine sample groups, except three control samples. The samples were immersed in the mouthrinse solutions for 120 hrs, and changes in colour reflectance and surface roughness values were measured by UV light spectrophotometry (Vita Easyshade; VITA Zahnfabrik) and by profilometer device (MitutoyoSurftest SJ-301), respectively. The change of surface roughness was inspected by Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM). RESULTS. There was a positive correlation between the ${\Delta}E$ and increase in the surface roughness. Two of the ceramic materials, IPS Empress and Lava Ultimate, were affected significantly by the treatment of the mouthrinse solutions (P<.05). The most affecting solution was Tantum Verde and the most affected material was Lava Ultimate. As expected, the most resistant material to ${\Delta}E$ and chemical corrosion was IPS e max CAD among the materials used. CONCLUSION. This work implied that mouthrinse with lower alcohol content had less deteriorating effect on colour and on the surface morphology of the bioceramic materials.

• Journal of the Korean association of regional geographers
• /
• v.17 no.3
• /
• pp.348-356
• /
• 2011

Someday Mt. Baekdu could erupt by records of orogeny activity until today. This study is to predict influence area of lava flow and volcanic ash by simulation of volcanic eruption in the Mt. Baekdu. Simulation for eruption applied to supposing 7 grade of volcanic explosivity index, season from fall to spring. As a simulation results, lava flewed down into slope of China and volcanic ash diffused over the North Korea. Volcanic ash spreads to Ulneung area after nine hours. It was predicted that 61 cities and villages out of 27 administrative districts of Si-Gun were affected by volcanic ash in North Korea and an immense volume of volcanic ash was blown into farm lands, city areas and forests. This results expected to utilize information for disaster preparation of North Korea and joint research with South-North Korea and China.

• Journal of the Korean earth science society
• /
• v.28 no.4
• /
• pp.462-477
• /
• 2007

The purpose of this study is to determine the petrology of basalt and the volcanic process in the Seondol cinder cone, Seobjikoji area, eastern Jeju Island. The Seondol cinder cone is mainly composed of spatters in the lower part, pyroclastic deposits including reddish brown blocks, ashes with volcanic bombs in the middle part, and dark black scoria deposits in the upper part. The volcanic sequences suggest volcanic processes that progress through Strombolian eruption and end with Hawaiian lava effusion which breached the cinder cone northwestward and extended over northwestward as lava delta and basalt emplaced as a volcanic neck in the central part of crater in the cinder cone. The age of basalt lava flows is about $95\;{\pm}\;3\;ka$. The basalts belong to transitional basalt and show products of fractional crystallization of clinopyroxene and olivine from a parental basalt magma on the basis of variation diagram of major, trace and rare earth elements. Basalts in the region of this study are plotted at the region of within plate basalt.

• Journal of Technologic Dentistry
• /
• v.30 no.2
• /
• pp.87-92
• /
• 2008

Purpose: In this study, we tried to compare marginal accuracy when produce ceramic crown using all ceramic materials and existent metal-ceramic system. Material and methods: All-ceramic systems were E-max (Ivoclar/Vivadent, Lichtenstein), Lava(3M, U.S.A.) and Wol-ceram(Teamziereis, Germany). Metal-ceramic system(PFG) was composed of Au-Pt alloy (Metalor, Switzerlandand) and overlying ceramic(D-sign, Ivoclar/Vivadent, Lichtenstein). We fabricated metal master die with upper diameter of 7.95mm, bottom diameter of 9.00mm, height of 5.00mm, and taper of $6^{\circ}$. All ceramic system used 0.5mm thickness ceramic coping, while metalceramic system used 0.3 thickness metal coping. By adding dentin and enamel ceramics on each coping, a crown with a proximal thickness of 1.0 mm and occlusal thickness of 2.0mm was fabricated. Pressure of 2kg was applied for 10 seconds on each crown with static load compressor. Before and after cementation, we measured the marginal gap at 4 points of each crown using optical microscope. The data was analyzed using a Student's t test and repeated-measures of analyses of variance(ANOVA) followed by a Bonferroni test. A p value<0.05 was considered significant. Results: As experiment results, marginal accuracy of wol-ceram and Lava is no good when compared with marginal accuracy of PFG. But marginal accuracy of E.max is good when compared with PFG. This result showed not significant. The marginal accuracy of E.max is good when compared with marginal accuracy of wol-ceram and Lava. Conclusion: The marginal accuracy of E.max is very good when compared with marginal accuracy of another group.

• The Journal of the Petrological Society of Korea
• /
• v.20 no.3
• /
• pp.151-159
• /
• 2011

The geology of the Gonaengisool-oreum, Bonggae-dong, Jeju consists of Yeongpyeong-dong basalt, Shinan-dong basalt, Bonggae-dong basalt and cinder in ascending order. Yeongpyeong-dong and Shinan-dong basalt is situated at the mid-mountain slope in southern part of the Gonaengisool-oreum, and Bonggae-dong basalt is located at the Gonaengisool-oreum area and nortgbern low foot of the mountain. Bonggae-dong basalt is aa lava flows with thick clinker. The Gonaengisool-oreum is isolated small volcano, that is, a lava shield having wide crater in the summit with several small pit craters. The average basal elevation of the Gonaengisool-oreum cone is 297.5 m(highest 300 m and lowest 295 m), and the highest summit is 304.5 m, average cone basal width is 597.5 m and cone height is 7.9 m, and mean slope of $1.5^{\circ}$ for the flank of the shield cone.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.2
• /
• pp.161-166
• /
• 2013

PURPOSE. This study aimed to identify the effects of the sintering conditions of dental zirconia on the grain size and translucency. MATERIALS AND METHODS. Ten specimens of each of two commercial brands of zirconia (Lava and KaVo) were made and sintered under five different conditions. Microwave sintering (MS) and conventional sintering (CS) methods were used to fabricate zirconia specimens. The dwelling time was 20 minutes for MS and 20 minutes, 2, 10, and 40 hours for CS. The density and the grain size of the sintered zirconia blocks were measured. Total transmission measurements were taken using a spectrophotometer. Two-way analysis of variance model was used for the analysis and performed at a type-one error rate of 0.05. RESULTS. There was no significant difference in density between brands and sintering conditions. The mean grain size increased according to sintering conditions as follows: MS-20 min, CS-20 min, CS-2 hr, CS-10 hr, and CS-40 hr for both brands. The mean grain size ranged from 347-1,512 nm for Lava and 373-1,481 nm for KaVo. The mean light transmittance values of Lava and KaVo were 28.39-34.48% and 28.09-30.50%, respectively. CONCLUSION. Different sintering conditions resulted in differences in grain size and light transmittance. To obtain more translucent dental zirconia restorations, shorter sintering times should be considered.

• Journal of the Korean association of regional geographers
• /
• v.12 no.4
• /
• pp.496-507
• /
• 2006

A hybrid approach integrating both high-resolution and hyperspectral data sets was used to map vegetation cover of a coastal lowland area in the Hawaii Volcanoes National Park. Three common grass species (broomsedge, natal redtop, and pili) and other non-grass species, primarily shrubs, were focused in the study. A 3-step, hybrid approach, combining an unsupervised and a supervised classification schemes, was applied to the vegetation mapping. First, the IKONOS 1-m high-resolution data were classified to create a binary image (vegetated vs. non--vegetated) and converted to 20-meter resolution percent cover vegetation data to match AVIRIS data pixels. Second, the minimum noise fraction (MNF) transformation was used to extract a coherent dimensionality from the original AVIRIS data. Since the grasses and shubs were sparsely distributed and most image pixels were intermingled with lava surfaces, the reflectance component of lava was filtered out with a binary fractional cover analysis assuming that tile total reflectance of a pixel was a linear combination of the reflectance spectra of vegetation and the lava surface. Finally, a supervised approach was used to classify the plant species based on tile maximum likelihood algorithm.

• The Journal of the Petrological Society of Korea
• /
• v.25 no.3
• /
• pp.283-298
• /
• 2016

Sangumburi crater, designated as Natural Monument No. 63, recognized as a maar, but precise geological mapping and geological characteristics in the field indicate that Sangumburi crater is a pit crater. Two stages of volcanic activities created Sangumburi pit crater. Lava flow (aphanitic pyroxene basalt I) and associated pyroclastic deposit (pyroclast I), composed of ash and lapilli, were formed at the stage 1. In the stage 2, lava flow (feldspar olivine basalt) was overlain by lava flow (aphanitic pyroxene basalt II) and associated pyroclastic deposit (pyroclast II), composed of agglomerate. Sangumburi pit crater formed at $0.073{\pm}0.036Ma$, determined by Ar-Ar age dating for the feldspar olivine basalt at the stage 2. It is not clear the preferred migration direction of subsurface magma after Sangumburi pit crater formed.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.55 no.2
• /
• pp.91-101
• /
• 2022

In this study, we analyzed the compositional characteristics of Melosira nummuloides mass-cultured using Jeju lava seawater. M. nummuloides showed the highest growth rate when cultured for 14 days at 17-20℃ and 15,000 lx. Proximate composition of raw-material (RM) and freeze-dried M. nummuloides (FM) showed high ash content (65-72%), while ethanol-extracted M. nummuloides (EM) had low ash and high lipid contents. The predominantly occurring mineral, Si, was 334 g/kg in RM and 269 g/kg in FM, but EM contained only 1.97 g/kg. The ratio of essential amino acids was similar in RM (38.93%) and FM (36.89%) lower in EM (17.83%), but branched chain amino acids required for muscle metabolism was high (63.40%). The polyunsaturated fatty acids of EM (34.74%) was 11% more than that in RM (23.81%), and the ratio of omega-6 to omega-3 fatty acids was 1:3.6. Furthermore, the concentration of total chlorophyll was higher by 5.15 times (62.32 mg/g) and that of fucoxanthin by 7.06 times (11.02 mg/g) in EM than in RM (12.11, 1.56 mg/g, respectively). The mass cultivation and filtration of M. nummuloides using lava seawater has high prospects of commercialization as a competitive bio silica, cosmetic and healthy functional food material.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2023.04a
• /
• pp.61-61
• /
• 2023

Zanthoxylum piperitum has been used as a spice or various folk remedies since ancient times, and studies on antibacterial, anti-inflammatory and analgesic effects have been reported. In this study, a raw material standardization study was conducted for the industrialization of Z. piperitum. First, optimal conditions for drying methods were established for the standardization of raw materials for Z. piperitum, and optimal conditions were established through content analysis using quercitrin, an marker compound, by obtaining samples every month. As for the drying method of Z. piperitum, it was confirmed that cold air drying was the best. It was analyzed that the marker compound content was highest in July. Next, for functional and toxicity evaluation of Z. piperitum, anti-oxidant, anti-inflammatory and immune enhancing efficacy and cytotoxicity were evaluated. Cytotoxicity of Z. piperitum was not observed, and it was confirmed that although it had an antioxidant and anti-inflammatory effect, it had no immuneenhancing effects. In addition, a study was conducted on the change in the efficacy of Z. piperitum using lava seawater, and as a result of the study, it was confirmed that the efficacy was superior when lava seawater was simultaneously treated. In conclusion, this study suggested the standardization of raw materials through the analysis of the marker compounds and the functional evaluation of Z. piperitum, and it can be used as basic data for future industrialization.