• 멤브레인
• /
• 제25권4호
• /
• pp.320-326
• /
• 2015

본 연구에서는 0.5 wt% 에멀젼형 절삭유 수용액에 평막형 분리막을 침지시키고 대칭 및 비대칭 사인파형 투과유속 연속운전(SFCO) 방식으로 실험하였다. 사용한 정밀여과막은 유효 막면적이 $0.02m^2$이고 공칭 세공크기가 $0.15{\mu}m$이었다. 탁도 기준으로 에멀젼형 절삭유의 99% 이상이 제거되었으며 산기량이 증가할수록 TMP가 낮게 상승하였다. 비대칭형 SFCO 운전방식은 투과유속이 낮은 $10{\sim}15L/m^2{\cdot}h$ 영역에서 대칭형 SFCO 운전방식보다 다소 유리하였다. 하지만, 투과유속이 높은 $25{\sim}30L/m^2{\cdot}h$에서는 대칭형 SFCO 운전이 매우 효과적임을 확인할 수 있었다.

• 멤브레인
• /
• 제25권1호
• /
• pp.7-14
• /
• 2015

본 연구에서는 MBR 내에 침지된 분리막 오염을 평가하기 위하여 운전시간에 따른 막간차압(TMP)을 측정하였다. 유효 막면적이 $0.02m^2$이고 공칭 세공크기가 $0.15{\mu}m$인 정밀여과용 평막 모듈을 MLSS 5,000 mg/L인 활성슬러지 용액에 침지시켰다. 운전/휴직(R/S) 및 사인파형 투과유속 연속운전(SFCO) 방식에 따른 TMP를 비교하기 위하여 동시에 투과 실험을 수행하였다. SFCO 운전방법에 따른 TMP는 R/S에 비하여 최대 93% 낮게 유지되었으며 투과유속이 증가함에 따라서 TMP 감소 효과는 줄어들었다. 또한 응집제인 $FeCl_3$를 활성슬러지 용액에 500 mg/L 농도로 주입시키면 SCFO 운전방식의 경우, 투과 운전시간을 5배 이상 증가시켜도 한계 운전 TMP인 55 kPa의 40% 미만으로 유지됨을 확인할 수 있었다.

• 생물환경조절학회지
• /
• 제1권1호
• /
• pp.21-27
• /
• 1992

야온과 시용질소의 형태를 달리한 양액이 탑채와 백경채의 생육 및 품질에 미치는 영향을 알아보기 위하여 실시한 실험의 결과는 다음과 같다. 1. 탑채, 백경채 모두 야온 15$^{\circ}C$ 에서 생육이 왕성하여 생체중이 무거웠으나 건물율과 vitamin C의 함량은 온도가 낮아질수록 증가하였다. 2. 양액의 N형태 비율에 따른 백경채의 생육은 NO$_3$$^{-}$ : NH$_4$$^{+}$ 의 비가 0 : 8에서만 극히 생육이 저조하고, 다른 처리구에서는 큰 차이가 없었다. 3. 양액내 NO$_3$$^{-}$-N의 함량이 높을수록 vitamin C의 함량이 많고, NH$_4$$^{+}$-N의 함량이 높을 때는 건물율이 높았다.

• 한국운동역학회지
• /
• 제16권4호
• /
• pp.189-194
• /
• 2006

The purpose of this study was to identify the relationship of one repetition maximum between flat bench press exercise and incline bench press exercise, and so 40 male students of U-university were sampled purposedly, who were skilled in flat bench press and incline bench press exercises. After measuring lRM of each exercise by free barbell weight, the correlation analysis and the simple regression analysis were examined by using SPSS 120 at a significance level .05. The conclusions were as follows; Firstly, it was identified that 1RM of flat bench press exercise and incline bench press exercise were $89.2{\pm}25.9kg$, $67.1{\pm}22.1kg$ respectively, and the coefficient of correlation between two variables was 0.969, so the relationship was positive correlation. Secondly, it was identified that the regression equation predicted 1RM of incline bench press exercise was significant actually and statistically, so it was expressed that the equation was -6.648 + 0.827 (1RM of flat bench press exercise).

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권8호
• /
• pp.1051-1056
• /
• 2001

Data for teat number for Landrace (L), Yorkshire (Y), crossbred of Landrace and Yorkshire (LY), and crossbred of Landrace, Yorkshire and Chinese indigenous Min Pig (LYM) were analyzed using Gibbs sampling. In Bayesian inference, flat priors and some informative priors were used to examine their influence on posterior estimates. The posterior mean estimates of heritabilities with flat priors were $0.661{\pm}0.035$ for L, $0.540{\pm}0.072$ for Y, $0.789{\pm}0.074$ for LY, and $0.577{\pm}0.058$ for LYM, and they did not differ (p>0.05) from their corresponding estimates of REML. When inverse Gamma densities for variance components were used as priors with the shape parameter of 4, the posterior estimates were still corresponding (p>0.05) to REML estimates and mean estimates using Gibbs sampling with flat priors. However, when the inverse Gamma densities with the shape parameter of 10 were utilized, some posterior estimates differed (p<0.10) from REML estimates and/or from other Gibbs mean estimates. The use of moderate degree of belief was influential to the posterior estimates, especially for Y and for LY where data sizes were small. When the data size is small, REML estimates of variance components have unknown distributions. On the other hand, Bayesian approach gives exact posterior densities of variance components. However, when the data size is small and prior knowledge is lacked, researchers should be careful with even moderate priors.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.533-538
• /
• 2000

In R.C. flat slab system, a brittle punching failure is a very fatal problem. But there is no generally well-defined answer to the problem and there are wide differences in current practical design codes. therefore, in this study, the factors affecting to punching failure mechanism have been studied to find out the punching shear behavior in R.C. flat slabs by comparing other investigations and practical design codes. Therefore, In this study, the factors affecting to punching failure mechanism have been studied to find out the punching shear behavior in R.C. flat slabs by comparing other investigations and practical design codes. The conclusions in this study are summarized as follows; 1) The factors affecting to punching shear are concrete strength ($f_\alpha$), ratio of column side length to slab depth (c/d), ratio of distance from column center to radial contraflexure (l/d), yield strength of steel ($f_y$), flexural reinforcement ratio ($\rho$) and size effects. 2) It is shown that th use of $\surd{f_{ck}}$in applying($f_\alpha$ to punching shear strength estimation may be more sensitive in high concrete strength. 3) The effects of l/d, ($f_y$, size are no clear in the punching failure mechanism, so in the future, it should be investigated with the effects of various composed load.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제13권4호
• /
• pp.184-195
• /
• 2005

This paper describes the recent work on advanced technology concepts applied to air cooled heat exchangers for residential air-conditioning. The concepts include vortex generators for the air-side, micro-fin or flat tubes for the refrigerant-side. Advances in understanding of heat transfer mechanisms, predictive models are discussed.

• Current Optics and Photonics
• /
• 제3권4호
• /
• pp.298-303
• /
• 2019

We propose a photonic quasi-crystal fiber (PQF) for supporting up to 14 orbital angular momentum (OAM) modes with low and ultra-flat dispersion characteristics over the C+L bands. The designed PQF which consists of a large hollow center and quasi structural small air holes in the clad region exhibits low confinement losses and a large effective index separation (>$10^{-4}$) between the vector modes. This proposed fiber could potentially be exploited for mode division multiplexing and other OAM mode applications in fibers.

• 한국수산과학회지
• /
• 제38권1호
• /
• pp.1-5
• /
• 2005

This study investigated and compared chemical properties and biological activities of four commercial sikhae products (three flat-fish, Pleuronectes herzensteini, Sikhae: product A, B, C; one Alaska pollack, Theragra chalcogramma, Sikhae: product D) and Alaska pollack Sikhae (product E). Total acidity, amino nitrogen, salinity and pH in all products were in ranges of $0.47-1.93\;g\%$, $145.94-204.81\;mg\%$, $3.40-4.00\%$ and 4.38-5.55, respectively. All products showed antimicrobial activities against Bacillus ceraus subtilis, B. cereus, Staphylococcus aureus, Listeria monocytogenes, Vibrio parahaemolyticus, except for Salmonella typhimurium. Particularly the activities were more effective with gram positive bacteria than gram negative bacteria. Antioxidative $(EDA_{50};\;14.20\;mg/mL)$ and Fibrinolytic (0.95 plasmin unit/mL) activities of product E were much stronger than commercial Sikhae products (EDA50; 18.87-34.60 mg/mL and 0.69-0.85 plasmin unit/mL).

• 설비공학논문집
• /
• 제7권1호
• /
• pp.112-119
• /
• 1995

Measurements of the local heat transfer coeffcients on a spherically concave surface with a round impinging jet are presented. The liquid crystal transient method was used for these measurements. This method, which is a variation on the transient method, suddenly exposes a preheated wall to an impinging jet while video recording the response of liquid crystals for the measurement of the surface temperature. The Reynolds numbers used were 1,000, 23,000 and 50,000 and the nozzle-to-jet distance was L/d=2, 4, 6, 8, 10. Presented results are compared to previous measurements for flat plate. In the experiment, the local heat transfer Nusselt numbers on a concave surface are higher than those on a flat plate. Maximum Nusselt number at all region occured at L/d=6 and second maximum in the Nusselt number occured at R/d=2 for both Re=50,000 and Re=23,000 in case of L/d=2 and for only Re=50,000 in case of L/d=4. All other cases exhibit monotonically decreasing value of the Nusselt number along the curved surface.