• Magazine of the Korean Society of Agricultural Engineers
• /
• v.41 no.3
• /
• pp.41-50
• /
• 1999

Derivatio of reasonable design floods was attempted by comparative analysis of design floods derived by Generalized Extreme Value(GEV) distribution using methods of L-moments and LH-moments for the annual maximum series at ten watersheds along Han, Nagdong. Geum, Yeongsan and Seomjin river systems, LH-coefficient of variation, LH-skewness and Lh-kurtosis were calcualted by KH-moment ration respectively. Paramenters were estimated by the Method of LH-Moments, Design floods obtained by Method of LH-Moments using different methods for plotting positionsi n GEV distribution and design floods were compared with those obtained using the Method of L-Moments by the Relative Mean Errors(RME) and Relative Absolute Errors(RAE). The results was found that design floods derived by the method of L-Moments and LH-Moments using Cunnane plotting position formula in the GEV distribution are much closer to those of the observed data in comparison with those obtained by methods of L-moments and LH-moments using the other formula for plotting positions from the viewpoint of Relative Mean Errors and Relative Absolute Errors. In viewpoint of the fact that hydrqulic structures including dams and levees are genrally using design floods with the return period of two hundred years or so, design floods derived by LH-Moments are seemed to be more reasonable than those of L-Moments in the GEV distribution.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.7 no.4
• /
• pp.91-97
• /
• 2003

The maximum moment may occur at interior supports of continuous bridges. If the bigger moment is applied on them, a local yielding at interior supports may occur. They may show plastic behaviors, and the moment will be redistributed. The strength design, L.F.D., redistributes 10% of the negative moment which is obtained from the elastic analysis. However, A.L.F.D method computes the moment which is redistributed. This moment is called automoment. The moment-rotation curve is needed to find automoment. In this paper moment-rotation curve for compact sections suggested from AASHTO Guide Specifications is used to find automoment. Based on A.L.F.D. limit states specification method, a three-span continuous bridge is designed.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.40 no.4
• /
• pp.45-57
• /
• 1998

This study was conducted to derive optimal design floods by Generalized Extreme Value (GEV) distribution for the annual maximum series at ten watersheds along Han, Nagdong, Geum, Yeongsan and Seomjin river systems. Adequacy for the analysis of flood data used in this study was established by the tests of Independence, Homogeneity, detection of Outliers. L-coefficient of variation, L-skewness and L-kurtosis were calculated by L-moment ratio respectively. Parameters were estimated by the Methods of Moments and L-Moments. Design floods obtained by Methods of Moments and L-Moments using different methods for plotting positions in GEV distribution were compared by the Relative Mean Errors(RME) and Relative Absolute Errors(RAE). The results were analyzed and summarized as follows. 1. Adequacy for the analysis of flood data was acknowledged by the tests of Independence, Homogeneity and detection of Outliers. 2. GEV distribution used in this study was found to be more suitable one than Pearson type 3 distribution by the goodness of fit test using Kolmogorov-Smirnov test and L-Moment ratios diagram in the applied watersheds. 3. Parameters for GEV distribution were estimated using Methods of Moments and L-Moments. 4. Design floods were calculated by Methods of Moments and L-Moments in GEV distribution. 5. It was found that design floods derived by the method of L-Moments using Weibull plotting position formula in GEV distribution are much closer to those of the observed data in comparison with those obtained by method of moments using different formulas for plotting positions from the viewpoint of Relative Mean Errors and Relative Absolute Errors.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.42 no.3
• /
• pp.45-55
• /
• 2000

This study was carried out to derive optimal design low flows bythe Weibull-3 and Wakeby distributions for the partial consecutive duration series at seven watersheds along Han. nagdong, Geum Yeongsan and Seomjin river systems. L-coefficient of variation L-skewness and L-kurtosis were calculated by the L-moment ratio respectively. Parameters were estimated by the method of L-Moments with consecutive duration. Design low flows obtained by method of L-Moments using with consecutive duration, Design low flows obtained by method of L-Moments using different methods for plotting positions formulas in the Weibull-3 and Wakeby distributions were compared by the Root Mean Square Errors(RMSE). It has shown that design low flows derived by the method of L-moments using Weivull plotting position formula in Wakeby distribution were much closer to those of the observed data in comparison with those obtained by the methods of L-moments with the different formulas for plotting positions in Weibull-3 distribution from the viewpoint of Root Mean Square Errors.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.310-310
• /
• 2012

확률강우량 산정은 수공구조물의 설계에 있어서 중요한 과정이다. 확률강우량을 산정함에 있어 지난 수십년간 모멘트법, 최우도법, 확률가중모멘트법, 그리고 L-모멘트법 등의 매개변수적 방법이 발달되어 적용되어 왔다. 매개변수적 빈도해석 방법은 그 적용성이 여러 연구를 통해 검정되었지만 가정한 확률분포와 매개변수 추정방법에 따라 확률강우량이 달라지며 강우지속시간과 기후변화 등에 따른 분포의 변동성을 고려해야 하는 단점이 있다. 매개변수적 빈도해석 방법의 단점을 극복하기 위하여 최근에 핵밀도함수 등을 포함한 다양한 비매개변수적 빈도해석 방법이 제안되고 있다. 본 연구에서는 서울기상관측소의 지난 50년간 지속시간 24시간 강우량을 바탕으로 수자원 분야에서 다양하게 적용된 바가 있는 인공신경망 기법과 대표적인 매개변수적 빈도해석 방법인 L-모멘트법을 이용하여 확률강우량을 산정하고 비교하였다. 그 결과 인공신경망 기법은 전통적인 매개변수방법의 하나인 L-모멘트법 보다 확률강우량 산정에 있어서 높은 정확도를 가지는 것으로 나타났다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.3B
• /
• pp.259-267
• /
• 2009

Generalized Extreme Value (GEV) distribution is recommended for flood frequency and extreme rainfall distribution in many country. L-moment method is the most common estimation procedure for the GEV distribution. In this study, the relationships between the cross-site correlations between extreme events and the cross-correlation of estimators of L-moment ratios (L-moment Coefficient of Variation (L-CV) and L-moment Coefficient of Skewness (L-CS)) for data generated from GEV distribution were derived by Monte Carlo simulation. Those relationships were fit to the simple power function. In this Monte Carlo simulation, GEV+ distribution were employed wherein unrealistic negative values were excluded. The simple power models provide accurate description of the relationships between cross-correlation of data and cross-correlation of L-moment ratios. Estimated parameters and accuracies of the power functions were reported for different GEV distribution parameters combinations. Moreover, this study provided a description about regional regression approach using Generalized Least Square (GLS) regression method which require the cross-site correlation among L-moment estimators. The relationships derived in this study allow regional GLS regression analyses of both L-CV and L-CS estimators that correctly incorporate the cross-correlation among GEV L-moment estimators.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.7
• /
• pp.621-628
• /
• 2016

This paper presents the development of a deadweight type 6-component force/moment generator for estimating characteristics of multi-component loadcell. Several new methods in moment generation are introduced in order to produce accurate force / moment and to minimize coupling effect between each force or moment components. In order to verify the reliability of the calibration system developed, estimation of the method for generating moment components and cross measurements between force or moment components are carried out utilizing a commercial torque cell and both-ends fixed beam designed in this paper.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.42 no.6
• /
• pp.63-71
• /
• 2000

The purpose of this study is to derive optimal design floods by the Wakeby distribution model using the probability weighted moments. Parameters for the Wakeby distribution were estimated by the probability weighted moments for the annual flood flows of the applied watersheds. Design floods obtained by the Wakeby and GEV distributions were compared by the relative mean errors, relative absolute errors and root mean square errors. In general, it has shown that the design floods by the Wakeby distribution using the methods of the probability weighted moments are closer to those of the observed data in comparison with those obtained by the GEV distribution.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.1132-1136
• /
• 2004

본 논문은 지금까지의 지점빈도해석의 약점을 보완하기 위하여 지역화의 개념을 사용한 지역빈도해석의 방법에 관한 연구이다. 지점빈도해석은 수문자료의 관측기간이 짧은 경우 정확도에 문제를 발생시킬 수 있으므로, 지점 내 충분한 수의 자료 확보가 선행되어야 한다. 반면 지역빈도해석의 경우 우리나라와 같이 자료의 수가 부족한 경우에도 효율적이고 안정적인 확률수문량을 산정할 수 있다. 본 연구에서는 한강유역의 강우자료 선별을 통해 신뢰성 있는 자료를 구축한 훈, L-모멘트기법과 Netmax법을 사용한 지역빈도해석을 각각 실시하여 기존의 방법으로 산정한 수문량과 비교${\cdot}$분석하였다. 지역빈도해석의 결과 남한강 유역은 이질성 척도가 큰 것으로 판명되어 남한강 유역의 경우 지역적인 세분화가 필요한 것으로 나타났다. Netmax를 이용하여 산정된 수문량은 L-모멘트법과 지점빈도해석 그리고 확률강우량도에 의해 산정된 값에 비하여 과소추정 되었다 지역적 특수성을 고려하지 않고 형성된 네트워크는 지역적으로 세분화가 필요한 지역에 대하여서 좋지 않은 결과를 보여주는 것으로 나타났다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.327-331
• /
• 2012

본 연구에서는 실무에서 적용하고 있는 매개변수 산정방법인 L-moment 방법과 자료계열의 이상치를 고려하여 수정 제시된 TL-moment 방법을 비교 분석하여 빈도해석을 수행하는 경우, 보다 효율적인 매개 변수 산정방법으로 수공구조물 설계 및 재난방재계획에 합리적인 기준을 제시하고자 하였다. 산정방법의 비교를 위하여 서울특별시를 대상으로 강우자료를 수집하였으며, 국내 강우에 적합한 확률분포형으로 선정되어 있는 Gumbel 분포형에 적용하여 모멘트와 확률강우량을 산정하였다. 또한, 산정된 모멘트와 지속기간 25개, 재현기간 8개년의 확률강우량을 비교하여 타당성을 검토하였다. 본 연구의 수행으로 TL-moment 방법에 의한 모멘트의 변동폭이 L-moment 방법 보다 작게 산정되었으며, 산정된 확률강우량의 비교에서 이 상치의 보정이 확인되었다.