• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.116-116
• /
• 2010

진공 chamber에서 방전된 plasma 내부를 외부 view port를 통하여 확인하는 것은 극히 제한적이며 leak의 확률을 높이고 plasma의 균일한 방전을 방해한다. 이를 개선하기 위하여 내장형 무선 카메라를 chamber 내부에 위치한 후 고진공 영역에서 촬영을 시도하였으나 일반적인 CCD 카메라로는 촬영할 수 없다. 고진공 영역에서 카메라 내부온도의 급격한 상승이 원인으로 밝혀졌고 적정온도인 $45^{\circ}C$를 초과하여 최대 $96^{\circ}C$까지 4 min 이내에 상승함을 IR camera로 확인할 수 있었으며 이 때 카메라가 작동하지 않았다. 또한 카메라를 고진공 영역에서 촬영 및 녹화하기 위해서는 $46^{\circ}C$의 온도를 낮추어야 함을 진공해제 이후 내부온도가 $50^{\circ}C$로 감소하면서 내장형 무선 카메라가 다시 작동함으로 인해 알 수 있었다. 본 연구에서는 이를 해결하기 위하여 내장형 무선 카메라에 AM 변조 방식의 311 MHz RF remote controller를 장착하여 외부에서 선택적으로 ON/OFF 할 수 있도록 개조하였고 10 L chamber에서 150 L/sec TMP를 이용하여 10-6 Torr의 압력에서 성공적으로 녹화 및 촬영하였다. 또한 내장형 무선 카메라 내부의 반도체 회로 규격 및 발열량과 heat sink의 규격 (열전도도, 복사율)을 추가로 조사하였다. 분자유동 영역에서 열전달은 복사에 의한 영향이 대부분이므로 내장형 무선 카메라 내부 온도를 감소시켜 카메라의 작동 시간을 연장하기 위하여 내부 회로에 emissivity가 높고 전기전도도가 낮아 회로에 영향이 없는 박막을 회로에 증착시키는 추후의 연구가 필요하다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.225-225
• /
• 2010

In this study, the optimum structure of a magnetic thin film inductor was designed for application of DC-DC converters. The $Ni_{81}Fe_{19}$ (at%) alloy was selected as a high-frequency($\geq$ MHz) magnetic thin film core material and deposited on various substrates (bare Si, $SiO_2$ coated Si) using a high vacuum RF magnetron sputtering system. As-deposited NiFe thin films show similar magnetic properties compared to bulk NiFe alloys, indicating that they have a good film quality. The optimum design of solenoid-type magnetic thin film inductors was performed utilizing a Maxwell computer simulator (Ansoft HFSS V7.0 for PC) and parameters obtained from the magnetic properties of magnetic core materials selected. The high-frequency characteristics of the inductance(L) and quality factor(Q) obtained for the designed inductors through simulation agreed well with those obtained by theoretical calculations, confirming that the simulated result is realistic. The optimum structure of high-performance ($Q{\geq}60$, $L\;=\;1{\mu}H$, efficiency${\geq}90%$), high-frequency (${\geq}5MHz$), and solenoid-type magnetic thin film inductors was designed successfully.

• 폴리머
• /
• 제35권4호
• /
• pp.284-288
• /
• 2011

초임계 유체에서 poly(L-Lactide) (PLLA)의 산업화 생산 공정 개발을 위한 예비 연구로 1-dodecano/stannous 2-ethyl-hexanoate(DoOH/Sn(Oct)$_2$)를 개시제로 하여 chlorodifluoromethane 초임계 용매 하에서 락티드의 개환 중합을 실시하였다. 중합은 3 L 반응기를 사용하였으며 중합시간, 온도, 압력 및 단량체와 초임계 용액 농도에 따른 중합거동을 관찰하였다. 중합시간이 5시간 경과할 경우 얻어진 중합체의 반응 수율 및 분자량은 각각 72%, 68000 g/mol이었다. 단량체의 농도가 증가할수록 중합체의 수율 및 분자량은 증가하였으며 최대 각각 97%, 144000 g/mol이 얻어졌다. 반응기의 압력이 130에서 240 bar로 증가할 경우 PLLA의 수율 및 분자량이 증가하였다. 얻어진 중합체의 열안정성을 향상시키기 위해 메탄올 처리 및 진공 처리를 실시하였다. 그 결과 두 가지 방법 모두 PLLA의 열안정성을 향상시켰다.

• 한국진공학회지
• /
• 제15권3호
• /
• pp.314-324
• /
• 2006

KSTAR ICRF 안테나의 진공특성을 실험적으로 조사하였다. 제작된 안테나를 총 유효배기속도 1015 l/s의 진공펌프가 장착된 시험용 진공용기에 설치하였으며, 고주파 시험하기 전에 시간에 따른 압력 변화, 총기체 부하, 도달 진공도 등을 측정하였다. 낮은 출력의 고주파를 반복적으로 인가함으로서 세정 효과를 확인하였다. 안테나에 고주파를 인가하여 시험하는 동안 진공도 변화를 측정하였으며, 압력 상승에 의해 방전이 유발되는 한계 압력을 조사하였다. 본 안테나의 경우 고주파 인가 중에 진공용기의 압력이 $10^{-4}$ mbar 이상이 되면 방전이 일어났다. 장펄스 시험에서 안테나의 온도와 시험용 진공용기의 압력을 측정하여 안테나를 냉각하지 않은 상태에서 운전이 가능한 전압을 조사하였으며, 냉각했을 때의 결과와 비교하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.472-477
• /
• 2004

Miniaturization is the central theme in modern fabrication technology. Many of the components used in modem products are becoming smaller and smaller. The direct write FIB technology has several advantages over contemporary micromachining technology, including better feature resolution with low lateral scattering and capability of mastless fabrication. Therefore, the application of focused ion beam(FIB) technology in micro fabrication has become increasingly popular. In recent model of FIB, however the feeding system has been a very coarse resolution of about a few ${\mu}{\textrm}{m}$. It is not unsuitable to the sputtering and the deposition to make the high-precision structure in micro or macro scale. Our research is the development of nano stage of 200mm strokes and l0nm resolutions. Also, this stage should be effectively operating in ultra high vacuum of about 1$\times$10$^{-5}$ pa. This paper presents the concept of nano stages and the discussion of the material treatment for ultra tush vacuum.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2004년도 한국우주과학회보 제13권2호
• /
• pp.281-284
• /
• 2004

According to the National Space Program of Korea, KARI (Korea Aerospace Research Institute) has been developing a large space simulator (working dimension; $\Phi8m\;\times\;L10m$) to verify the performance of future large satellites under the space environment conditions. Especially, a very low temperature condition of space will be simulated by shrouds covering the inside surface of the vessel. The surface of shrouds will be cooled down to 17K by liquid nitrogen (LN2) from ambient temperature and hence, an optimal LN2 circulation system design is necessary to remove gaseous nitrogen (GN2) sufficiently and maintain the shrouds at the LN2 temperature.

• Applied Science and Convergence Technology
• /
• 제25권3호
• /
• pp.61-65
• /
• 2016

Here, the rapid detection of Salmonella typhimurium by a portable surface plasmon resonance (SPR) biosensor in which the beam from a diode laser is modulated by a rotating mirror is reported. Using this system, immunoassay based on lipopolysaccharides (LPS)-specific monoclonal anti-Salmonella antibody was performed. For the purpose of orientation-controlled immobilization of antibodies on the SPR chip surface, the cysteine-mediated immobilization method, which is based on interaction between a gold surface and a thiol group (-SH) of cysteine, was adopted. As a result, using the portable SPR-based immunoassay, we detected S. typhimurium in the range from 10^7 CFU/mL to 10^9 CFU/mL within 1 hour. The results indicate that the portable SPR system could be potentially applied for general laboratory detection as well as on-site monitoring of foodborne, clinical, and environmental agents of interest.

• 한국진공학회지
• /
• 제7권s1호
• /
• pp.20-24
• /
• 1998

Photploymer films are widely used in printing and electronic industries, and their usage is expanding to encompass holography, data storage and data processing, optical waveguides and compact disks, etc. One of widely used photoplymerization initiator, 20chloro-hexaarylbiimidazole (o-Cl-HABI), is studied by laser flash photolysis in dichloromethane solution in the absence and presence of the visible light photosensitizing dye, 2, 5-bis[(2, 3, 6, 7 -tetrahydro- 1H, 5H -benzo [i, j,] quinolizin -1-yl) methylene]-cyclopenta-none, (JAW). In the presence of JAW, an increase in triarylimidazolyl radicals L.formation is observed in relative to the absence of JAW. The mechanism of this photosensitizing dissociation is concluded as the dissociation of the o-Cl-HABI radical anion formed by the electron transfer from excited singlet state of JAW to o-Cl-HABI. The observed formation of L.radicals exhibits a linear dependence on o-Cl-HABI concentration. The rate constant of electron transfer obtained from this dependence is equal to (1.0$\pm$0.2) x $10^9 M^{-1}s^{-1}$. No reaction between the excited triplet state of JAW and o-Cl-HABI is found.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.255-256
• /
• 2006

The electrical properties of viologen ($VC_8SH$) were studied in terms of the tunneling current characteristics using self-assembling techniques and ultra high vacuum scanning tunneling microscopy (UHV-STM). We fabricated the Au substrate were deposited by thermal evaporation system($420^{\circ}C$). Self-assembled monolayers (SAMs) were prepared on Au(111), which had been thermally deposited onto freshly cleaved, heated mica. The Au substrate was exposed to a 1 mM/L solution of Octanethiol in ethanol for 24 h to form a monolayer. After through rinsing the sample, it was exposed to a 0.1 mM/L solution of $VC_8SH$ in ethanol for 30 min. We measurement of the morphology on the single viologen molecule. The current-voltage (I-V) properties were measured at arbitary configured points on the surface of the sample by using a STS.

• 한국태양에너지학회 논문집
• /
• 제23권3호
• /
• pp.15-22
• /
• 2003

This study deals with the collection of solar energy and its storage in evacuated tubular collector systems for different types of header design, flow passage and heat transfer devices. In order to elicit the most efficient combination of header design, flow passage, heat transfer hardware and operating conditions, a series of tests were done for the four different types of solar collectors utilizing vacuum tubes. The systems studied here either has the evacuated collector tubes with a metal cap on one end or the all-glass evacuated solar collector tubes These evacuated tubular collectors are known to be more efficient than the flat-plate ones in both direct and diffuse solar radiation. Test results show that the system comprised of the all-glass evacuated tubes with U-shaped copper pipes inside outperforms the other configurations. Especially, a rolled copper sheet tightly placed along the inner surface of each inner tube enhances heat transfer between the heated collector surface and the water contained in the U-shaped copper pipe.