• Applied Chemistry for Engineering
• /
• v.32 no.3
• /
• pp.268-276
• /
• 2021

As wireless communication devices become more common, interests in how to control the electromagnetic waves generated from the devices are increasing. One of the most commonly used electromagnetic wave control materials is magnetic one, but due to the features that make the product heavy and thick when applied to the product, it is difficult to use them in curved electronic devices. Therefore, a polymer flexible meta electronic device has been presented to sort out the problem, which is thin and can have various curvatures. However, it requires an additional evaluation of curvature reliability. In this study, we developed a method to predict electromagnetic wave control characteristics through the resistance/length of the conductive ink line patterns of polymer flexible meta electronic devices, which is inversely proportional to the electromagnetic wave control characteristics. As the radius of curvature decreased, the resistance/length increased, and there was little variations with the duration times of curvature. We also found that both permanent and recoverable changes along with the removal of curvature were occurred when the curvature was applied, and that the cause of these changes was newly created vertical cracks in the conductive ink line pattern due to the tensile stress applied by applying curvature.

• Korean Journal of Environmental Biology
• /
• v.38 no.4
• /
• pp.518-527
• /
• 2020

The aim of this study was to define the toxic effects of diuron and irgarol, which are new-antifouling agents, on the fertilization rate and normal embryogenesis rate in the sea urchin, Hemicentrotus pulcherrimus. In addition, the study was intended to confirm the hindrance of development in sea urchins. The fertilization rate of H. pulcherrimus was not decreased by the tested concentrations. However, the normal embryogenesis rate was decreased in a concentration-dependent manner. The 50% effective concentrations (EC₅₀) of normal embryogenesis rate were 7.12 mg L^-1 and 2.31 mg L^-1, respectively. As the embryos developed into pluteus larvae, after 18 h of exposure to diuron and irgarol at EC₅₀, development of the early gastrula stage was delayed, and significant developmental delays were observed after 24 h. After this, continuous developmental delays were observed in the process leading to the early gastrular, gastrular, early pluteus, and pluteus stages. Therefore, the toxic effects of diuron and irgarol on sea urchins were attributed to the delay in the developmental processes in the early life stages. Diuron and irgarol are highly persistent in the environment and have known-well toxic effects on various marine organisms including invertebrates, as shown in this study. Therefore, it is urgent to establish an environmental protection strategy to prevent the pollution of and preserve the marine environment.

• Journal of Nutrition and Health
• /
• v.54 no.2
• /
• pp.199-210
• /
• 2021

Purpose: This study investigated the food consumption behaviors in Korean adults, according to the agrifood consumer competency index (ACCI). Methods: Data obtained from the 2019 Consumption Behaviors Survey for Food were analyzed. A total of 6,176 adults (2,783 males, 3,393 females) aged ≥ 19 years, were included in the study. Based on the score of agrifood consumer competency index, the subjects were classified into three groups. The dietary habits, eating-out and food-delivery/take-out behaviors, opinion of food labeling, and concerns for domestic products were compared among the 3 groups. Results: The ACCI scores of the male and female subjects were 63.6 and 64.8, respectively. Subjects of both genders in the highest tertile of the ACCI were more likely to have a higher education level and higher health concerns, as compared to subjects in the lowest tertile (p < 0.05). Male subjects having highest tertile of the ACCI reported significantly more exercise and alcohol consumption, as compared to subjects in the lowest tertile (p < 0.05). A higher score of the ACCI also portrayed a higher satisfaction in own diet and greater checking of the food label. Moreover, subjects with a higher score of the ACCI showed greater satisfaction and reliability in the food label, as well as increased concerns for domestic agrifoods, local foods, and eco-friendly foods. Subjects in the lowest tertile of the ACCI acquired their dietary information from acquaintances, whereas subjects in the highest tertile of the ACCI learnt the information from food labels themselves. Conclusion: These results are indicative of the food consumption and behaviors of Korean adults according to their ACCI scores, and provide basic data that will be useful for implementing an effective food policy.

• Korean Journal of Clinical Laboratory Science
• /
• v.54 no.2
• /
• pp.110-118
• /
• 2022

Candidemia is a major cause of nosocomial infections resulting in increased morbidity and mortality. It remains a serious risk in inpatients and increases medical treatment costs. From 2009 to 2018, Candida strains (3,533) isolated from blood culture tests at the S Hospital were analyzed according to the period, year, sex, age, ward, etc. During the entire period, 54,739 of 717,996 blood culture tests showed a positive rate (7.6%) and the Candida isolation rate was 3,533 (6.4%) out of 1,036 patients. Among the Candida isolates, C. albicans was most common (33.8%), followed by C. tropicalis (28.6%), C. glabrata (19.8%), C. parapsilosis (7.8%), and C. krusei (4.0%). In early (2009~2013)/late (2014~2018) isolation, C. tropicalis decreased by 3.8% and C. glabrata increased by 3.4%. After 50 years of age, the higher the separation frequency. C. parapsilosis (31.3%) in 1~10s, C. tropicalis (30.3%) and C. glabrata (27.6%) in 41~50s, and C. tropicalis (28.6%) in 80s are relatively frequent. has been separated C. krusei was isolated in a relatively high proportion from females (60.9%). Therefore, a systematic and continuous nosocomial infection control system should be established for appropriate treatment as per antifungal treatment guidelines. The system should continuously monitor the distribution of Candida species and provide rapid identification results.

• The Journal of Korean Society for Radiation Therapy
• /
• v.33
• /
• pp.89-97
• /
• 2021

Purpose: The purpose of this study is to compare and evaluate the dose change according to the gas volume variations in the rectum, which was not included in the treatment plan during radiation therapy for cervical cancer. Materials and methods: Static Intensity Modulated Radiation Therapy (S-IMRT) using a 9-field and Volumetric Modulated Arc Therapy (VMAT) using 2 full-arcs were established with treatment planning system on Computed Tomography images of a human phantom. Random gas parameters were included in the Planning Target Volume(PTV) with a maximum change of 2.0 cm in increments of 0.5 cm. Then, the Conformity Index (CI), Homogeneity Index (HI) and PTV D_max for the target volume were calculated, and the minimum dose (D_min), mean dose (D_mean) and Maximum Dose (D_max) were calculated and compared for OAR(organs at risk). For statistical analysis, T-test was performed to obtain a p-value, where the significance level was set to 0.05. Result: The HI coefficients of determination(R²) of S-IMRT and VMAT were 0.9423 and 0.8223, respectively, indicating a relatively clear correlation, and PTV D_max was found to increase up to 2.8% as the volume of a given gas parameter increased. In case of OAR evaluation, the dose in the bladder did not change with gas volume while a significant dose difference of more than D_mean 700 cGy was confirmed in rectum using both treatment plans at gas volumes of 1.0 cm or more. In all values except for D_mean of bladder, p-value was less than 0.05, confirming a statistically significant difference. Conclusion: In the case of gas generation not considered in the reference treatment plan, as the amount of gas increased, the dose difference at PTV and the dose delivered to the rectum increased. Therefore, during radiation therapy, it is necessary to make efforts to minimize the dose transmission error caused by a large amount of gas volumes in the rectum. Further studies will be necessary to evaluate dose transmission by not only varying the gas volume but also where the gas was located in the treatment field.

• The Journal of Korean Society for Radiation Therapy
• /
• v.33
• /
• pp.9-14
• /
• 2021

This study examined dose change depending on the reposition error of the junction at the time of treatment with multi-isocenter volumetric modulated arc therapy. This study selected a random treatment region in the Arccheck Phantom and established the treatment plan for multi-isocenter volumetric modulated arc therapy. Then, after setting the error of the junction at 0 ~ 4 mm in the X (left), Y (upper), and Z (inner and outer) directions, the area was irradiated using a linear accelerator; the point doses and gamma indexes obtained through the Phantom were subsequently analyzed. It was found that when errors of 2 and 4 mm took place in the X and Y directions, the gamma pass rates (point doses) were 99.3% (2.085) and 98% (2.079 Gy) in the former direction and 98.5% (2.088) and 95.5% (2.093 Gy) in the latter direction, respectively. In addition, when errors of 1, 2, and 4 mm occurred in the inner and outer parts of the Z direction, the gamma pass rates (point doses) were found to be 94.8% (2.131), 82.6% (2.164), and 72.8% (2.22 Gy) in the former part and 93.4% (2.069), 90.6% (2.047), and 79.7% (1.962 Gy) in the latter part, respectively. In the X and Y directions, errors up to 4 mm were tolerable; however, in the Z direction, error values exceeding 1 mm were beyond the tolerance level. This suggests that for high and low dose areas, errors in the direction same as the progress direction in the treatment region have a more sensitive dose distribution. If the guidelines for set-up errors are established at the institutional level through continuous research in the future, it will be possible to provide good quality treatment using junctions.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.2
• /
• pp.61-72
• /
• 2022

The present study was conducted to examine the effect of soybean silage as a crude protein supplement for corn silage in the diet of Hanwoo steers. The first experiment was conducted to evaluate the effect of replacing corn silage with soybean silage at different levels on rumen fermentation characteristics in vitro. Commercially-purchased corn silage was replaced with 0, 4, 8, or 12% of soybean silage. Half gram of the substrate was added to 50 mL of buffer and rumen fluid from Hanwoo cows, and then incubated at 39℃ for 0, 3, 6, 12, 24, and 48 h. At 24 h, the pH of the control (corn silage only) was lower (p<0.05) than that of soybean-supplemented silages, and the pH numerically increased along with increasing proportions of soybean silage. Other rumen parameters, including gas production, ammonia nitrogen, and total volatile fatty acids, were variable. However, they tended to increase with increasing proportions of soybean silage. In the second experiment, 60 Hanwoo steers were allocated to one of three dietary treatments, namely, CON (concentrate with Italian ryegrass), CS (concentrate with corn silage), CS4% (concentrate with corn silage and 4% of soybean silage). Animals were offered experimental diets for 110 days during the growing period and then finished with typified beef diets that were commercially available to evaluate the effect of soybean silage on animal performance and meat quality. With the soybean silage, the weight gain and feed efficiency of the animal were more significant than those of the other treatments during the growing period (p<0.05). However, the dietary treatments had little effect on meat quality except for meat color. In conclusion, corn silage mixed with soybean silage even at a lower level provided a greater ruminal environment and animal performances, particularly with increased carcass weight and feed efficiency during growing period.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.3
• /
• pp.63-71
• /
• 2022

In this study, the interfacial reaction and drop impact reliability of Sn-Ag-Cu (SAC) solder and electroless nickel autocatalytic gold (ENAG) were studied. In addition, the solder joint properties with the ENAG surface finish was compared with electroless nickel immersion gold (ENIG) and electroless nickel electroless palladium immersion gold (ENEPIG). The IMC thickness of SAC/ENAG and SAC/ENEPIG were 1.15 and 1.12 ㎛, respectively, which were similar each other. The IMC thickness of the SAC/ENIG was 2.99 ㎛, which was about two times higher than that of SAC/ENAG. Moreover, it was found that the IMC thickness of the solder joint was affected by the metal turnover (MTO) condition of the electroless Ni(P) plating solution, and it was found that the IMC thickness increased when the MTO increased from 0 to 3. The shear strength of SAC/ENEPIG was the highest, followed by SAC/ENAG and SAC/ENIG. It was found that when the MTO increased, the shear strength was lowered. In terms of brittle fracture, SAC/ENEPIG was the lowest among the three joints, followed by SAC/ENAG and SAC/ENIG. Likewise, it was found that as MTO increased, brittle fracture increased. In the drop impact test, it was confirmed that the 0 MTO condition had a higher average number of failures than the 3 MTO condition, and the average number of failures was also higher in the order of SAC/ENEIG, SAC/ENAG, and SAC/ENIG. As a result of observing the fracture surface after the drop impact, it was found that the fracture was between the IMC and the Ni(P) layer.

• Journal of the Korean Orthopaedic Association
• /
• v.55 no.2
• /
• pp.135-142
• /
• 2020

Purpose: This paper presents the long term follow-up results of arthroscopic partial repair for massive irreparable rotator cuff tears using a biceps long head auto graft. Materials and Methods: Forty-one patients with massive irreparable rotator cuff tear, who underwent arthroscopic repair, were reviewed retrospectively. Patients who underwent arthroscopic partial repair using a biceps long head auto graft were assigned to group 1, and patients in group 2 underwent arthroscopic partial repair alone. Patients with a less than 50% partial tear of the long head biceps tendon were included in this study. The clinical scores were measured using a visual analogue pain scale (VAS) for pain, range of motion (ROM), The University of California, Los Angeles shoulder score (UCLA), American Shoulder and Elbow Surgeons Shoulder Score (ASES), and Korean Shoulder Scoring System (KSS) scores preoperatively and at the final follow-up. The acromiohumeral interval (AHI) was measured using plain radiographs taken preoperatively and at the final follow-up, and re-tear was evaluated using postoperative ultrasound or magnetic resonance imaging at the last follow-up. Results: The mean age of the patients was 62.1±12.7 years, and the mean follow-up period was 90.3±16.8 months. No significant differences in the VAS and ROM (forward flexion, external rotation, internal rotation) were found between the two groups (p=0.179, p=0.129, p=0.098, p=0.155, respectively). The UCLA (p=0.041), ASES (p=0.023), and KSS (p=0.019) scores showed functional improvements in group 1 compared to group 2. At the last follow-up, the measured AHI values were 9.46±0.41 mm and 6.86±0.64 mm in group 1 and 2, respectively (p=0.032). Re-tear was observed in six out of 21 cases (28.6%) in group 1 and nine out of 20 cases (45.0%) in group 2; the retear rate was significantly lower in group 1 than in group 2 (p=0.011). Conclusion: Arthroscopic partial repair for a massive irreparable rotator cuff tear using a biceps long head auto graft has significant clinical usefulness in functional recovery and decreases the re-tear rates after surgery than arthroscopic partial repair alone, showing favorable results after a long-term follow-up.

• Journal of the Korean earth science society
• /
• v.43 no.2
• /
• pp.239-252
• /
• 2022

Quality control methods for the first G-band vapor radiometer (GVR) mounted on a weather aircraft in Korea were developed using the GVR Precipitable Water Vapor (PWV). The aircraft attitude information (degree of pitch and roll) was applied to quality control to select the shortest vertical path of the GVR beam. In addition, quality control was applied to remove a GVR PWV ≥20 mm. It was found that the difference between the warm load average power and sky load average power converged to near 0 when the GVR PWV increased to 20 mm or higher. This could be due to the high brightness temperature of the substratus and mesoclouds, which was confirmed by the Communication, Ocean and Meteorological Satellite (COMS) data (cloud type, cloud top height, and cloud amount), cloud combination probe (CCP), and precipitation imaging probe (PIP). The GVR PWV before and after the application of quality control on a cloudy day was quantitatively compared with that of a local data assimilation and prediction system (LDAPS). The Root Mean Square Difference (RMSD) decreased from 2.9 to 1.8 mm and the RMSD with Korea Local Analysis and Precipitation System (KLAPS) decreased from 5.4 to 4.3 mm, showing improved accuracy. In addition, the quality control effectiveness of GVR PWV suggested in this study was verified through comparison with the COMS PWV by using the GVR PWV applied with quality control and the dropsonde PWV.