• Journal of Korean Society for Quality Management
• /
• v.40 no.3
• /
• pp.234-244
• /
• 2012

Purpose: In the private sector, many Customer Satisfaction Index Models have already been developed and are being applied in a variety of industries. In spite of continuously increasing of quality for military goods, measuring tools of Quality Satisfaction have not been developed yet. Method: In 2004, Defense Quality Assurance Agency and Seoul National University jointly developed MCSI(Military Customer Satisfaction Index) as a benchmark NCSI(National Customer Satisfaction Index), but it is limited to aply to military goods. We focused on product quality and developed MQSI(Military Quality Satisfaction Index) Model. Result: We propose a new Satisfaction Index Model(MQSI, Military Quality Satisfaction Index) that can be applied to military goods. Conclusion: In this study, configuration and variables of MQSI Model are described. Also the result of preliminary survey is briefly explained.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.6
• /
• pp.536-545
• /
• 2011

Structural model of laminated composite plates based on the first order shear deformable plate theory and subjected to a combination of magnetic and thermal fields is developed. Coupled equations of motion are derived via Hamilton's principle on the basis of electromagnetic equations (Faraday, Ampere, Ohm, and Lorentz equations) and thermal ones which are involved in constitutive equations. In order to reveal the implications of a number of geometrical and physical features of the model, free vibration of a composite plate immersed in a transversal magnetic field and subjected to a temperature gradient is considered. Special coupling effects between the magnetic-thermal-elastic fields are revealed in this paper.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.2
• /
• pp.357-364
• /
• 2002

The study performed a series of flexural tests on Closed Cold-Formed Steel Sections for stud, joist, and roof truss. Results were compared with analytical values. Each 2.4-m long and 0.9-m wide specimen consisted of two steel beams set at 0.46 m interval. The steel beams were attached to the specimens using either plaster board or ply wood. Another specimens did not use any attachment material. Positive and negative bending tests were conducted to investigate the composite behavior, including the effects of plaster board or ply wood on the buckling behavior of steel beam. Full-scale roof truss tests were also performed to study the buckling behavior and failure mode of the truss members.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.04b
• /
• pp.85-88
• /
• 2004

Mono-crystalline silicon(mono-Si) is both abundant in our environment and an excellent material for Si device applications. However, single crystalline silicon solar cell has been considered to be expensive for terrestrial applications. For that reason, the last few years have seen very rapid progress in the research and development activities of layer transfer(LT) processes. Thin film Si layers which can be detached from a reusable mono-Si wafers served as a substrate for epitaxial growth. The epitaxial films have a very high efficiency potential. LT technology is a promising approach to reduce fabrication cost with high efficiency at large scale since expensive Si substrate can be recycled. Low quality Si can be used as a substrate. Therefore, we propose one of the major technologies on fabricating thin film Si substrate using a LT. In this paper, we study the LT method using the electrochemical etching(ECE) and solid edge.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.7
• /
• pp.22-34
• /
• 2020

Three-dimensional (3D) computer-aided design (CAD) models require different levels of detail (LODs) depending on their purpose. Therefore, it is beneficial to automatically simplify 3D CAD assembly models to meet the desired LOD. Feature-based 3D CAD assembly models typically have the lowest and highest feasible limits of LOD during simplification. In order to help users obtain a feasible simplification result, we propose a method to simplify feature-based 3D CAD assembly models by determining the lowest and highest limits of LOD. The proposed method is verified through experiments using a simplification prototype implemented as a plug-in type module on Siemens NX.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.12
• /
• pp.608-616
• /
• 2006

Recently, a switched reluctance motor is widely used in various industries because it has many advantages such as a simple structure, robustness, less maintenance, high torque/weight ratio, and easy speed control over other types of motors. However, a switched reluctance motor inherently produces acoustic noise and vibration caused by torque ripple. Applications of these motors where silent operation is desirable have thus been limited. In this paper, a new stator pole face having a non-uniform air-gap and a pole shoe attached to the lateral face of the rotor pole are suggested in order to minimize torque ripple. The effects of each design parameter are validated using a time-stepping finite element method. The parameters are optimized by utilizing response surface method (RSM) combined with (1+1) evolution strategy. The result shows that the optimized shape gives higher average torque and drastically reduced torque ripple.

• Natural Product Sciences
• /
• v.11 no.2
• /
• pp.79-84
• /
• 2005

Thirteen compounds were isolated from the roots of Angelica genuflexa through repeated silica gel column chromatography. Nine coumarins, isoimperatorin (1), osthol (2), demethylsuberosin (3), oxypeucedanin (4), heraclenin (5), pabulenol (7), umbelliferone (8), oxypeucedanin hydrate (9) and marmesinin (11), and four chromones, hamaudol (6), cimifugin (10), sec-O-glucosylhamaudol (12) and prim-O-glucosylcimifugin (13), were identified by physicochemical and spectroscopic analysis. Among these, compounds 3, 5, 6, 8, 12, and 13 were isolated for the first time from the roots of Angelica genuflexa. These coumarins and chromones were examined for their anticomplement activity. Demethylsuberosin (3) showed a weak anticomplement activity with an $IC_{50}$ value of $390\;{\mu}M$.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.10 s.253
• /
• pp.1003-1011
• /
• 2006

Droplets are ejected onto a substrate through a nozzle by pushing liquids in flow channels of drop-on-demand devices. The behavior of ejection and formation of droplets is investigated to enhance the physical understanding of the hydrodynamics involved in inkjet printing. The free surface phenomenon of a droplet is described using $CFD-ACE^{TM}$ which employs the volume-of-fluid (VOF) method with the piecewise linear interface construction (PLIC). Droplet formation characteristics are analyzed in various flow regimes with different Ohnesorge numbers. The computational results show that the droplet formations are strongly dependent on the physical properties of working fluids and the inlet flow conditions. In addition, the wetting characteristics of working fluids on a nozzle influence the volume and velocity of a droplet produced in the device. This study may provide an insight into how a liquid droplet is formed and ejected in a piezoelectric inkjet printing device.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1608-1613
• /
• 2007

최근들어 수자원 분야에서 GIS(Geographic Information System)의 활용에 대한 많은 연구가 이루어지고 있다. 수자원 관련 분야에 있어서 GIS는 수문현상에 영향을 미치는 기상학적인 요인, 토양, 토지이용도, 배수 유역의 형태 등 수문정보를 획득하기 위한 수단으로 사용될 수 있을 뿐만 아니라, 유역에서의 지형학적, 기후학적 특성을 시간과 인력을 절약하여 정량화할 수 있다는 것이 입증되고 있다. 하천에서의 유출량 추정은 강우, 수위와 같은 수문데이터의 신뢰도에서 많은 문제점이 야기되고 있다. 따라서 모의 입력매개변수의 중요요소인 지형정보의 경우 GIS 기법을 이용할 경우 기존 방법과는 달리 신뢰성 있는 정보를 획득할 수 있으므로 모형의 결과를 개선하는 데 도움이 될 것이다. 본 연구에서는 미국의 Environmental Modeling Research Laboratory(EMRL)에서 개발한 지리정보시스템과 수문유출모형이 접목된 WMS(Watershed Modelling System) 모형을 HEC-1 모형과 연계하여 낙동강수계 제1지류인 회천유역 개진1, 개진2 지점의 유출 해석을 실시하였다. GIS와 결합된 홍수유출모형인 WMS를 이용하여 유역 내의 지형특성인자 및 하천망을 추출하였으며, 유출해석은 WMS에 내재된 HEC-1을 이용하였다. 유효강우량의 산정을 위해 SCS CN 값을 사용하였으며, CN 계산을 위해서는 토지이용도 토양도를 이용하였다. 합성단위도법은 SCS 무차원 단위도법을 사용하여 유출을 모의하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1684-1688
• /
• 2007

하천의 수위를 유지하거나 농업용수를 취수할 목적으로 하도 내에 조성되는 보는 현재 국내에 약 18,000개 정도가 있다. 그러나 최근 도시 인구집중화에 따른 농경지의 도시화, 토지이용의 변화, 취수 시설물의 통합, 시설의 노후화 등으로 많은 수의 보가 제 기능을 상실하고 있다. 이러한 보는 하천생태통로의 차단, 미생물 어류의 이동 단절, 수질의 악화 초래, 수변 생물서식처의 변화를 가져오고 있다. 기능이 상실된 보 가운데 곡릉천 곡릉2보를 철거함에 따른 상하류 하상변동을 해석하고자 미공병단의 HEC-6 모형을 이용하여 수치해석을 하였다. HEC-6 모형의 수치해석을 위해 곡릉천의 단면, 유사량, 입도분포, 수위-유량 곡선을 이용하였고, 보 철거 후 시간에 따른 유사이동량의 변화를 파악하고 보 상류의 하상세굴과 보 하류의 퇴적현상을 관찰하였다. 또한 보 철거 후 장기하상변동을 모의한 결과 곡릉천에서의 곡릉2보를 철거함으로 인한 평형하상으로 도달되는 시간은 20년 정도 소요되는 것으로 예측되었다. 이러한 기능이 상실된 보를 철거함으로 인해 하류에 미치는 물리적 영향의 분석은 하천 생태 복원을 위한 기초 자료로서 이용할 수 있을 것으로 판단된다.