• Korean Journal of Agricultural Science
• /
• v.49 no.4
• /
• pp.873-883
• /
• 2022

American plum line pattern virus (APLPV), a member of the genus Ilarvirus in the family Bromoviridae, is one of the plant quarantine pathogens in Korea. In this study, 15 candidate primer sets were designed and examined to develop a reverse transcription polymerase chain reaction (RT-PCR) assay for plant quarantine inspection of APLPV. Using APLPV-infected and healthy samples, the primer sets were assessed for APLPV detection. To confirm the occurrence of nonspecific reactions, six ilarviruses (Apple mosaic virus, Asparagus virus 2, Blueberry shock virus, Prune dwarf virus, Prunus necrotic ringspot virus, and Tobacco streak virus) and 10 target plants (Prunus mume, P. yedoensis, P. persica, P. armeniaca, P. dulcis, P. tomentosa, P. avium, P. glandulosa, P. salicina, and P. cerasifera) were examined. Finally, two primer sets were selected. These primer sets could generate the expected amplicons even with at least 1 ng of the total RNA template in concentration-dependent amplifications. In addition, a positive clone was developed for use as a positive control in the abovementioned RT-PCR assay.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1395-1397
• /
• 1996

Many of the existing neural associative memories are trained and recalled in separate modes and are not suitable for temporal pattern storage and classification in that user must specify the time and length of input patterns. In this paper, a new on-line temporal associative memory model is presented. This memory is structured in layers of neurons and each neuron has limited number of weights so that calculation complexity can be considerably reduced and processing of patterns can be achieved in real time.

• Journal of electromagnetic engineering and science
• /
• v.5 no.1
• /
• pp.14-20
• /
• 2005

In this paper, a technique is presented for broadbanding the bow-tie slot antenna fed by a CPW(coplanar waveguide). The bandwidth performance of existing bow-tie slot designs is greatly enhanced by optimizing the slot shape and properly adjusting the characteristic impedance of the coplanar waveguide feeding the slot. To connect the 50-ohm input coaxial line to the CPW feed line, a linear taper in the CPW is employed. The designed antenna shows a 3.5 $\~$ 10.0 GHz impedance bandwidth, a 3.5 $\~$ 6.0 GHz pattern bandwidth, and a 5.5 $\~$ 7.5 dBi gain over 3.5 $\~$ 6.0 GHz. Above 6.0 GHz, the antenna radiation pattern appreciably deviates from the typical dipolar pattern.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.6
• /
• pp.1546-1564
• /
• 2012

Pattern-based query processing has not attracted much attention in wireless sensor network though its counterpart has been studied extensively in data stream. The methods used for data stream usually consume large memory and much energy. This conflicts with the fact that wireless sensor networks are heavily constrained by their hardware resources. In this paper, we use piece wise representation to represent sensor nodes' collected data to save sensor nodes' memory and to reduce the energy consumption for query. After getting data stream's and patterns' approximated line segments, we record each line's slope. We do similar matching on slope sequences. We compute the dynamic time warping distance between slope sequences. If the distance is less than user defined threshold, we say that the subsequence is similar to the pattern. We do experiments on STM32W108 processor to evaluate our strategy's performance compared with naive method. The results show that our strategy's matching precision is less than that of naive method, but our method's energy consumption is much better than that of naive approach. The strategy proposed in this paper can be used in wireless sensor network to process pattern-based queries.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.6
• /
• pp.821-832
• /
• 2002

The purpose of this study was to develop grading method of the basic brassiere patterns therewith, provide for 12 size's brassiere patterns and prove fitness of their's and shape. The collected data were statistically processed using the SAS 6.12 for Means, Standard Deviation, etc. The results of this study can be summarized as follows; 1. The basic sizes adopted at the first design stage (see fig.1-2) were 75AA, 75A and 75B each of which was designed as upper foundation basic pattern in reference to the cup size. At the second stage, each of the upper body foundation basic pattern was used to design lower cup, upper up, front panel and wing in their order(see fig.3-6). At the third stage, the other sizes were graded in reference to the three brassiere patterns (75AA, 75A and 75B) to produce 12 brassiere sizes(see Tab. 7-8). In order to develop the basic patterns of adult women's brassieres, 33 women were selected per 11 size combination(3 women per size combination), and then, their brassiere fitting was teated. As a result, the fronts of the basic patterns were found to have such problems as undone front center, poor levelling of upper cup's bottom line or lower cup's top line, poor shape of upper cup's outside top line and shoulder strip position. On the other hand, on the rear side of the basic patterns, the central part of the wing was slightly lifted, while the wing width and straps'interval did not befit the ful1-cup brassiere. The result of this first brassiere fitting test showed that the functionality and aesthetics of the basic pattern brassieres were more or less satisfactory, and thus, the problems were addressed for the second teat. In the second test, the aesthetics, breast-shaping effect and functionality of the basic pattern brassieres were much improved. 2. We were to present the final brassiere sizing system to extend the interior length of breast and the exterior length of breast on the basis of fitting test. Thereby, 75B$.$80A$.$80B$.$85A$.$85B's the interior lengths of breast were enlarged to 0.7cm, the rest size was enlarged to 0.5cm and the exterior length of breast was enlarged to 0.5cm regardless of sizes. 3. The upper foundation basic patterns of 75AA and 75B were presented and and the basic brassiere pattern and grading pattern were presented through to.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.461-466
• /
• 2007

There has been a great interest in printing technology as a low cost and mass production method for the application of printed electronics such as printed TFT, solar cell, RFID Tag, printed battery, and so on. In this study, apparatuses of gravure-offset printing are developed for fine line-width/gap printing and examining pattern distortion occurred in gravure-offset printing process. The fine line-width/gap pattern shows that it is possible to make around 20 micro-meter line-width/gap printing patterns. Pattern distortion is modeled, and the amount and shape of the distortion are calculated by using commercial FEM code. The roll-to-roll printing system under development consists of unwinder/rewinder, two printing units, one coating unit, drying units, guiding unit, vision system, and other auxiliary devices. For multi-layer printing, the system is designed to be capable of printing two different materials.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.127-132
• /
• 2004

The third double-track construction part of work, called Chung Ang Railroad line(Deok-So$\∼$Won-Ju) is in progress and the personal museum located 330m from the starting point of Pal-Dang Tunnel(length=4,470m) line in the canyon is to be effected by rock blasting during the tunnel excavation work, especially museum articles and building itself. This paper is the example of application suitable tunnel rock blasting pattern for excavation after the case study about the investigation and analysis of rock blasting noise pollution during tunnel excavation work. The museum is a three-story building, RC concrete structure and is located 17m from the top of the tunnel, in the center of the double-track line. Comparing estimate vibration frequency with site vibration one, it can be verified the reasonable rock blasting noise pollution as improving the application of tunnel excavation rock blasting pattern. The above pattern has been selected economically and effectively and applied to our construction field.

• Korean Institute of Interior Design Journal
• /
• v.27 no.2
• /
• pp.118-127
• /
• 2018

To complete the appropriate pattern language as a planning tool for suburban houses in Korea, this study reviews the characteristics in applying the pattern language to suburban houses in Korea by creating the pattern application examination chart regarding 110 patterns in architecture and evaluating and analyzing 24 examples in terms of the applicability of the patterns, the results of which are as set forth below. Firstly, when grouping the upper 31 patterns by similar characteristics, it was distinguished by the characteristics relating to (i) securing of lighting and viewing; (ii) placing of buildings and space and adjustment of inside and outside privacy through such placing; (iii) placing of proper motion line and functions of adjacent space according to such motion line; and (iv) determining of important space such as personal room, area for couple or children, staircase, entrance, hallway, etc. Secondly, when analyzing the reasons that the lower 41 patterns have not been applied, it was characterized by (i) the work space not suitable for suburban houses or the patterns suitable for commercial space; (ii) the patterns not suitable in Korea due to cultural differences; and (iii) the patterns whose applicability cannot be confirmed due to the limitation of examples and materials used in this study. Thirdly, the analysis of each pattern group (A through M) revealed that the pattern groups D and G are rarely related to suburban houses and J and M are patterns whose applicability cannot be determined in this study. Another characteristics is that the pattern groups B, E, F, I and L which obtain high scores in applicability are importantly reflected in planning for suburban houses in Korea. Fourthly, this study renders the average score of applicability, and the applicability rate, of the examples and confirms the number of the patterns applied in confirmity, patterns partially or potentially applied and patterns not applied at all.

• Journal of the Korean Society for Railway
• /
• v.14 no.1
• /
• pp.73-79
• /
• 2011

This paper aims to find out the statistical characteristics of railroad weather-related accidents and incidents of each railroad line and then reduce the railroad accidents and prepare for the climate change. For this, we used data of KROIS and Korea railroad accidents report during 1996-2008. The results are as follows; Gyeongbu line is the most vulnerable line to railroad weather-related accidents, Yeongdong and Taebaek line are also the vulnerable line. The main railroad weather-related accidents and incidents is a railway obstruction and the next is a signal failure, a power supply failure. The second cause of a railway obstruction was some different for each line, but the main cause was a collapsed roadbed. We knew that the cold front accompanied with a heavy rainfall for a short time is the main weather pattern which cause the railroad accidents.

• Journal of the Korean Society of Costume
• /
• v.59 no.1
• /
• pp.94-105
• /
• 2009

Jeogori, Korean jacket, can be categorized into two styles. Traditional style Jeogori is based on conventional construction method for ceremonial or festive occasions. Contemporary casual style Jeogori is based on western style flat pattern making for better fitting and functionality. Traditional style Jeogori is quite flat on human body because it is not considered the grade of shoulder line and is drawn by vertical & horizontal line. This characteristic feature causes weakness in functionality and comfort compared to contemporary casual style. Apparently contemporary casual style has better wearing comfort. Yet to most Koreans, contemporary style Jeogori seems to lack of some characteristic style of its own. This study is to find out how to make Jeogori well balanced in terms of functionality, fit, comfort and traditional style. Currently used Jeogori patterns are compared in order to select the best among them. Onto the selected pattern, several alterations were tried focused on shoulder, armhole and sleeve lines to make optimal modifications. After several comparative fitting tests, the final pattern making method was suggested.