• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.2
• /
• pp.644-653
• /
• 1991

A wave instability problem is formulated for natural convection flows adjacent to a inclined isothermal surface in pure water near the density extremum. It accounts for the nonparallelism of the basic flow and temperature fields. Numerical solutions of the hydrodynamic stability equations constitute a two-point boundary value problem which are accurately solved using a computer code COLSYS. Neutral stability results for Prandtl number of 11.6 are obtained for various angles of inclination of a surface in the range from-10 to 30 deg. The neutral stability curves are systematically shifted toward modified Grashof number G=0 as one proceeds from downward-facing inclined plate(.gamma.<0.deg.) to upward-facing inclined plate (.gamma.>0.deg.). Namely, an increase in the positive angle of inclination always cause the flows to be significantly more unstable. The present results are compared with the results for the parallel flow model. The nonparallel flow model has, in general, a higher critical Grashof number than does the parallel flow model. But the neutral stability curves retain their characteristic shapes.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.3
• /
• pp.115-121
• /
• 2016

A mackerel grader is a machine for sorting mackerel according to size. In this study, the dynamic deflection and optimal sorting simulation of a mackerel grader was carried out by using multi-body dynamics. To analyze the dynamic deflection of the roller, RecurDyn, a multi-body dynamics analysis program, was used. The dynamic deflection of the roller pipe was analyzed according to the inclination of the roller pipe. When the inclination of the roller pipe was 30 degrees, the roller indicated the maximum deflection of about 6.3 mm at the center of the mass. To simulate the mackerel sorting, the mackerel grader machine was modeled, and the contact simulation between the mackerel model and the rotating roller pipe was carried out. When the inclination of the roller frame was 7 degrees, the mackerel grader indicated optimal sorting performance.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.9_10
• /
• pp.1373-1383
• /
• 2007

The purpose of this study is to find out the dimensions of kidult fashion emotion and identify the influence of socio-psychological characteristics(nostalgic orientation, change inclination, and self-esteem) on kidult fashion emotion. 'Kidult', composite of kid and adult is indicating a group of people who feel nostalgic for and feel attachment to the products that they have been used in their childhood. A questionnaire was prepared in the survey and a total of 474 women in their twenties and thirties who had purchased the kidult fashion products were selected. The research findings are as follows: 1. Kidult fashion emotion can be classified as 5 factors: pursuits of fashion emotion, seeking girlish image emotion, preference for character emotion, seeking fun emotion, and past oriented emotion. 2. Socio-psychological variable that affected kidult fashion emotion is turned out change inclination. 3. The higher the seeking girlish image and pursuit of fashion emotion tendencies, the more they purchase the kidult fashion products. Based on these results, kidult fashion emotions are not the attachment to the past but positive expression of self and individuality.

• Journal of the Korean Society of Physical Medicine
• /
• v.9 no.1
• /
• pp.115-123
• /
• 2014

PURPOSE: This study was to investigate of pain and spine shape in elementary school students. The aim of this study was to prevent pain and spinal misalignment is to provide basic data and the need for regular screening for elementary school students. METHODS: This study had a survey research about pain and spine shape by using questionnaires and Formetric 4D. Subjects were 301 Elementary School Students RESULTS: In the presence or absence of pain and the presence of pain was in a high proportion and many of them indicated the back as a pain area, As a result of the spine shape contour, pelvic tilt was normal and trunk inclination was asymmetric as well as thoracic kyphosis and lumbar lordosis were diminished. There was a significant difference in relationship of trunk inclination according to pain CONCLUSION: The asymmetric of trunk inclination influenced the pain, In contrast, the pain did not influence thoracic kyphosis and lumbar lordosis in diminished. but, the diminution in thoracic kyphosis and lumbar lordosis are potential sources of pain. Regular checkups are necessary to prevent elementary school students from a change of spine shape and a pain, Moreover, education of maintaining normal posture should be followed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.8
• /
• pp.527-533
• /
• 2016

A new empirical correlation was developed to identify the effect of an inclination angle on pool boiling heat transfer coefficient of a tube submerged in the saturated water at atmospheric pressure. Through the experiments and the survey of published results 431 data points were obtained and the nonlinear least square method was used as a regression technique. The heat flux of the tube($0{\sim}120kW/m^2$), inclination angle($0^{\circ}{\sim}90^{\circ}$), and the length divided by the diameter of a tube(18~42.52) were selected as major parameters. The newly developed correlation well predicts the experimental data within ${\pm}18%$, with some exceptions.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.7
• /
• pp.148-157
• /
• 1996

This paper deals with the applicability of linear elastic fracture mechanics under centrifugal force. Stress intensity factors K are calculated as a function of the inclination crack of length 2a, the position at different angular velocities 1200rpm, 2400rpm and at different values of the inclination crack angle .phi. ( .phi. = 0 .deg. , 15 .deg. , 30 .deg. , 45 .deg. , 60 .deg. , 75 .deg. , 90 .deg. ) and are measured in models of rotation disks using a boundary element method. Especially, stress intensity factors $K_{l}$ and $K_{ll}$ obtained separately from the crack tip of the mixed mode, were used to further investigate the influence of $K_{l}$ and $K_{ll}$ on fracture in rotating disks. With the increase in the speed of rotation, the effect of K/ sub l/became larger where as that of $K_{ll}$ became small. For the increase in the inclination crack angle .phi. , a decrease in $K_{l}$ and an increase in $K_{ll}$ were observed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.2
• /
• pp.92-97
• /
• 2011

Vehicle lightings are very important for safe driving during night time. Since the eye recovery time after an exposure to oncoming headlights would take after several seconds, the aiming point of vehicle head lamps have to pass safety requirements. Despite the fact that vehicle inclination is variable with vehicle load conditions, the head lamps aiming point is usually fixed at a constant position which is set by car manufacturer. Consequently, vehicle head lamps under varying load conditions often make people in the opposing vehicle uncomfortable, and even worse, can cause an accident. This paper presents an active vehicle lighting mechanism to automatically adjust its aiming point, or cut-off line, in order to compensate the change in vehicle inclination resulting from load variations. The effectiveness of the proposed method is demonstrated through a set of simulations and experiments with a real vehicle.

• Journal of Korean Association for Spatial Structures
• /
• v.16 no.1
• /
• pp.85-94
• /
• 2016

In this study, an acceleration sensor that has optical fibers to measure the inclination and acceleration of a structure through contradictory changes in two-component FBG sensors was examined. The proposed method was to ensure precise measurement through the unification of the deformation rate sensor and the angular displacement sensor. A high sensitivity three-axis accelerometer was designed and prepared using this method. To verify the accuracy of the accelerometer, the change in wavelength according to temperature and tension was tested. Then, the change in wavelength of the prepared accelerometer according to the sensor angle, and that of the sensor according to the change in ambient temperature were measured. According to the test results on the FBG-based vibration sensor that was developed using a high-speed vibrator, the range in measurement was 0.7 g or more, wavelength sensitivity, 2150 pm/g or more, and the change in wavelength change, $9.5pm/^{\circ}C$.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.1
• /
• pp.30-35
• /
• 2005

An automatic transmission pattern with the fixed standard shift map can provide comfortable shift to driver. However it may be a complain to provide shift by the same shift pattern for driver because the inclination of a driver may be various. Therefore, in this paper, we design the decision module, which can decide the driving style using input to decide the inclination of the driver and driving manner. The goal of this paper is to calibrate the shift map according to the inclination of the driver using the decided driving manner from the proposed module. As a result, the proposed intelligent automatic transmission system can provide a suitable shift point and time to the driver. To verify the performance of the proposed system, the real data that is obtained from the road test will be used.

• The korean journal of orthodontics
• /
• v.23 no.4 s.43
• /
• pp.493-501
• /
• 1993

It is the aim of this study to determine the impacts of radicular development of lower third molars on its eruption/impaction and to grope the prediction for eruption and/or impaction in advance. Three hundred and thirty cases of orthopantomogram were employed and classified as mesial root-dominant group, distal root-dominant group and Identical group according to the radicular development of lower third molars. This presentation has carried out the incipient mesial inclination, radicular development, impaction/eruption rate and changes of mesial inclination of the very teeth. Consequently the following summary and conclusions were drawn; Radicular development dominated mesial root than the distal and dominant mesial root invited higher potentialities for normal eruption. The mesial or honzontal impactions were detected on the distal root-dominant group. This analysis has been suggested the potential eruption/impaction of lower third molars were dependent upon the radicular development and the incipient mesial inclination.