• 산업공학
• /
• 제10권2호
• /
• pp.115-125
• /
• 1997

The main purpose of this study is to establish standard times of several manufacturing processes in a small-sized manufacturing company located in Taegu. This company produces two types of products; single parts and part assemblies of bicycles. Due to lack of the standards on daily or hourly production volumes, the production manager could not assign workers daily production volume at the start of production, and could not exercise tight supervision. The standard times established in this study were much less than the average production times found in the daily production report. Based on these standard times, we calculated the number of machines that a worker can operate properly without bringing overload on him, and established a line balanced production system in each manufacturing process to minimize work-in-process inventory.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.220-222
• /
• 2004

The IEC standards related to the Technical Regulation in Korea Electricity Business Act are classified into the standards/guides for electrical system and the specifications for electrical equipment/materials. IEC Standard 60364 "Electrical Installations of Buildings" and IEC Standard 61936 "Power Installations Exceeding 1 kV AC" prepared by IEC Technical Committee(TC) 64 and TC 99 respectively, are representative standards for electrical installations of buildings, substations, industrial plants, etc.

• 품질경영학회지
• /
• 제41권4호
• /
• pp.637-648
• /
• 2013

Purpose: The objective of this study is to provide a methodology that can facilitate efficient development of a product portfolio by utilizing Korean Standards(KS) networks. Methods: A case study on a steel manufacturing company is provided. Social network analysis h as been conducted on KS network and KS certification information of the company. Core test standards of a company have been identified. The core standards, then, used to construct a product-standard network of a corresponding industry. Results: As a result of analyzing product-standard networks, a product portfolio of a company has been developed. It has been shown that the candidate product portfolio is a cost-effective alternative in terms of standard maintenance cost. Conclusion: By using social network analysis, standards information can be used to support new product development process.

• 에너지공학
• /
• 제25권4호
• /
• pp.110-123
• /
• 2016

산업화에 따른 에너지 소비량의 증가와 지구온난화에 따른 환경 문제가 대두되면서 세계 각국은 안정적이고 환경친화적인 에너지자원인 신재생에너지의 보급을 촉진하고자 지원정책을 운영하고 있다. 본 연구에서는 주요국의 정책 동향 변화와 국내 의무할당제도를 실용주의 산업정책 제도설계 구성요소인 정치적 리더십, 정책조정과 협의 기구, 책임성 및 투명성 있는 정책의 집행의 관점에서 비교 분석을 통해 문제점을 도출하고, 신재생에너지 지원정책의 성공적인 운영을 위하여 실용주의 산업정책 기본 개념을 근거로 정책적인 제언을 제시하였다.

• 한국물환경학회지
• /
• 제35권1호
• /
• pp.43-54
• /
• 2019

The objective of this study was to assess the effect of policies on water quality management based on the changes in pollutants and water quality in Special Water Preservation Area (SWPA) of Lake Paldang watershed from 1990 to 2016. The population, total sewage and flow rate of wastewater in SWPA continuously increased from 1990 to 2016, while the location of new facilities for industrial and livestock facilities has been restricted. However, unlike the buffer zone in which industrial and livestock facilities were continuously reduced after implementing of TMDL, it was found that the effect of land-use regulations on industrial and livestock facilities in SWPA were mitigated by the increase in the size of large facilities. Since 1999 when the emission standard of public sewage treatment plants (STP) was changed, the water quality of Lake Paldang has increased despite the increase of pollutant source. Since emission standard of STP changed in 2012 (BOD 5 mg/L, TP 0.2 mg/L), BOD concentration in Lake Paldang has also improved to the level of water quality in the early 1990s where as TP concentration has remained at its lowest since 1990. BOD and TP average discharge concentration of 43 STP (${\geq}500m^3/day$) in 2016 have been maintained $1.7{\pm}0.7mg/L$ and $0.06{\pm}0.02mg/L$ respectively. While the discharged load of STP in SWPA was decreased by the concentration management, the contribution rate to the total discharged load of non-point pollutants increased to 70 % in 2015, and the contribution rate to the point discharged load of individual treatment facilities increased to 80 %.

• 품질경영학회지
• /
• 제17권2호
• /
• pp.81-92
• /
• 1989

A class of standard optimization techniques to estimate the stationary transition probabilities among states is discussed. With the use of aggregate time series data on employed labor in industrial sectors, the alternative restricted estimates including minimum absolute deviation, unweighted, weighted, generalized inverse, minimum chi-square and maximum likelihood are evaluated and compared. Analytic and numerical results are shown favorably with the viewpoint of the validity and predictive potentiality of model.

• 대한산업공학회지
• /
• 제10권1호
• /
• pp.37-40
• /
• 1984

A model for the weight distribution of pellet sizes of carbon black products is proposed so that it may be utilized in establishing the product standard and a quality control scheme. The various grades of carbon black products from the Korea Steel Chemical Co., Ltd. are examined to validate the adequacy of the proposed model.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제8권2호
• /
• pp.15-21
• /
• 2004

A Conjugate Gradiant (CG) method is proposed for unconstained optimization which is invariant to a nonlinear scaling of a strictly convex quadratic function. The technique has the same properties as the classical CG-method when applied to a quadratic function. The algorithm derived here is based on a logarithmic model and is compared to the standard CG method of Fletcher and Reeves [3]. Numerical results are encouraging and indicate that nonlinear scaling is promising and deserves further investigation.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제12권2호
• /
• pp.109-118
• /
• 2008

We present a new version of the first return time test for pseudorandomness. Let $R_n$ be the first return time of initial n-block with overlapping. An algorithm to calculate the probability distribution of the first return time $R_n$ for each starting block is presented and used to test pseudorandom number generators. The standard Z-test for log $R_n$ is applied to test the pseudorandom number generators.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제15권2호
• /
• pp.83-96
• /
• 2011

This work proposes a binomial method for pricing the cliquet options, which provide a guaranteed minimum annual return. The proposed binomial tree algorithm simplifies the standard binomial approach, which is problematic for cliquet options in the computational point of view, or other recent methods, which may be of intricate algorithm or require pre- or post-processing computations. Our method is simple, efficient and reliable in a Black-Scholes framework with constant interest rates and volatilities.