• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.3
• /
• pp.311-321
• /
• 2007

Nowadays, concerns have much more growing regarding indoor air quality (IAQ) on the public transportation including railway vehicles. Last year Korea Ministry of Environment (ME) set new guideline for public transportation. In this study several factors were analyzed which may affect comfortableness of railway passenger cabin, and we monitored IAQ parameters (PM10, CO, $CO_2$, VOCs, temperature and humidity) to investigate the present pollution in passenger cabin. In general, the railway air quality was satisfactory. The PM10 and $CO_2$ level on all passenger cabin were below the new guideline level 1 for PM10 $(200{\mu}g/m^3)\;and\;CO_2(2,000ppm)$. Clustering method was carried out to classify the air polluting pattern of the cabin. As a result, the pollutants could be classified to 4 clusters and the origin of pollution is soil, diesel exhaust gas, abrasion of rail and plume.

• Journal of Korean Society on Water Environment
• /
• v.21 no.2
• /
• pp.132-140
• /
• 2005

The pilot test of a new alternative for small wastewater treatment system has been conducted for two years. It consists of a hybrid bioreactor and the expert system including the process control logic, PLC system, and HMI for the process automation. In order to monitor and remote control its status, the real-time data was transferred from the on-site control center to the central station via a wireless local area network. More efficient and stable performances were observed at automatic operating mode compared with the manual. On an average, COD, SS, T-N and T-P concentrations in the effluent from the hybrid bioreactor were less than 14, 7, 12 and 0.9 mg/L, respectively. According to the result from pilot tests, the quality of treated wastewater with sand filtration was enough to be utilized again.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.4
• /
• pp.459-469
• /
• 2005

In recent years, concerns have been growing globally regarding greenhouse gases. Open burning of biomass causes emission of a number of greenhouse and other gases and substances. This paper studied an analysis on the characteristics of four types of biomass using duel type cone calorimeter. Cone calorimeter is widely used for assessing combustibility of materials in Europe. As a result, we evaluated several characteristics of biomass, such as heat released rate, smoke production rate, CO, $CO_2$ production and mass loss rate, and so on. $CO_2$ is currently responsible for over $60\%$ of the enhanced greenhouse effect, and may be the most important contributor to future. $CO_2$ production for biomass in the range of $1.74\~1.99kg/kg$ is similar to previous research conducted by Bhattacharya et al. (2002a).

• Proceedings of the Korean Society of Plant Biotechnology Conference
• /
• 2004.05a
• /
• pp.87-87
• /
• 2004

• Particle and aerosol research
• /
• v.14 no.3
• /
• pp.81-88
• /
• 2018

The market for improving the indoor air quality is continuously increasing, and air cleaners are the representative products. As interest in indoor air quality increases, so are the ultrafine particle which are harmful to the human body. Despite its many advantages, electrostatic precipitators are less used in indoor air due to ozone production. In this study, the carbon fiber sheet was applied to the discharge electrode and compared with the conventional tungsten wire discharge electrode. The particle collection efficiency and the amount of ozone generation were measured for 10-100 nm particles. Furthermore, it was applied to commercial air purifier with electrostatic precipitator to compare particle removal performance. The carbon fiber sheet type discharge electrode generates a small amount of ozone, and thus it can be applied to improve indoor air quality.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.1
• /
• pp.192-196
• /
• 2005

Abstract Oligotrophic microbial fuel cells (MFCs) were tested for the continuous monitoring of low biochemical oxygen demand (BOD) by using artificial wastewater, containing glucose and glutamate, as check solution. Ten times diluted trace mineral solution was used to minimize the background current level, which is generated from the oxidation of nitrilotriacetate used as a chelating agent. The feeding rate of 0.53 ml/min could increase the sensitivity from 0.16 to 0.43 ${\mu}$A/(mg BOD/l) at 0.15 ml/min. The dynamic linear range of the calibration curve was between 2.0 and 10.0 mg BOD/l, and the response time to the change of 2 mg BOD/l was about 60 min. The current signal from an oligotroph-type MFCs increased with the increase in salts concentration, and the salt effect could be eliminated by 50 mM phosphate buffer.

• Journal of Radiation Industry
• /
• v.9 no.2
• /
• pp.77-84
• /
• 2015

The stainless steel mesh coated with poly(acrylic acid) hydrogel was fabricated and applied for the separation of water and oil. The stainless steel mesh was immersed in aqueous poly (acrylic acid) solution, and then irradiated by radiation to introduce poly(acrylic acid) hydrogel on the surface of mesh by crosslinking. It was possible to separate oil and water from mixtures of oil/water effectively using the hydrogel-coated mesh. The effect of irradiation dose, coating thickness, size of mesh on the separation efficiency was examined.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.19 no.1
• /
• pp.35-46
• /
• 2013

Purpose: Health is one of the most important interests in current and future human society. Various efforts, which to maintain and promote their good health conditions, continue to be tried in future urban and architectural environment. The purpose of this study is to establish an integrated framework of research approaches for healthy urban and architectural environment that continuously promotes health according to people's entire life course. Methods: This was done by literature reviews, which is related to interdisciplinary researches for the determinants of health and healthy environment. Results: As a result of this study, an integrated research model, as a methodology, was proposed. This explains the concept of integrated research approaches for urban and architectural environment in the respect of people's health. Integrated health concept includes not only the area of health care environment to have recovery and treatment but also the daily living environment for people who have potential of being ill, and finally the city environment for entire people as health supporting elements including safety and primary prevention. Implications: Under the basis of this model, according to the life course, various researches on sustainable healthy urban and architectural environment should be followed from now on. The model should also be continuously complemented and developed into a standard of healthy environment.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2020.06a
• /
• pp.89-89
• /
• 2020

• Bulletin of the Korean Chemical Society
• /
• v.30 no.12
• /
• pp.3131-3132
• /
• 2009