• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.49 no.2
• /
• pp.106-115
• /
• 2013

A series of fishing experiments were carried out in the western coastal waters of Korea from May, 2006 to September, 2007, using gill nets of different mesh sizes (m=101, 121.8, 152.5, 176.8, and 191 mm) to determine the mesh selectivity of gill net for swimming crab, Potunus trituberculatus. The catch species was composed of swimming crab (87%), Thomas's rapa whelk Rapana venosa (5%), arthritic neptune Neptunea cumingi (2%), Japanese swimming crab Charybdis japonica (2%), marbled sole Pleuronectes yokohamae (1%), pen shell Atrina pectinata, ocellate spot skate Okamejei kenojei, and so on. The carapace length (CL) of each swimming crab caught in the experimental nets was measured. Sponge crab (egg-bearing female crab) was appeared from the end of June to August in the coastal waters. The master selection curve was estimated by applying the extended Kitahara's method. The selection curve showed that the gill nets of larger mesh size allowed more crabs of small carapace size to escape. The optimum value (CL/m) was 0.645 and the CL/m was estimated to be 0.301, 0.354, 0.391, 0.422, and 0.450 when the retention probabilities were 0.1, 0.2, 0.3, 0.4 and 0.5, respectively.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.43 no.4
• /
• pp.274-280
• /
• 2007

The mesh selectivity of gill net for Japanese sandfish (Arctoscopus japonicus) caught in the East Sea, Korea was described. The experiment was conducted with five different kinds of mesh size (39.4, 45.5, 51.5, 53.0, 57.6mm) between November and December 2006 in spawning season. The catch was mostly Japanese sandfish (93.3%) and some others (6.7%), and almost all of the female Japanese sandfish were larger than the fork length at 50% maturity (16.7cm). The selection curve for the female Japanese sandfish caught from the experiments was fitted by the Kitahara's method to a polynomial equation which was $s(R)={\exp}\{(0.2584R^3-5.3445R^2+32.269R-59.868)-0.6585\}$ where R＝l/m, and l and m are fork length and mesh size, respectively.

• Korean Journal of Microbiology
• /
• v.6 no.4
• /
• pp.113-121
• /
• 1968

This study has been aimed to determine the ecological factors with relationship to the Jongkok production in view of fermentation technology by means of some strains, Asp. kawachii, which is now preserved by the author and the following factors are included during the study; inorganic salts, nitrogen, sugar, water contents and temperature. The results, are as follows: (a) Sugar among other above-mentioned factors is increasingly affecting the number of the short type of conidiophore on culture medium and the conidiophore is increased by direct ratio until glucose concentration of 50%, at which concentration is mostly effective for the short type of conidiophore, while other factors did not affect on it. (b) Until glucose concentration of 50% sugar component of culture medium is favorable for the spore formation of Asp. kawachii by direct ratio. And peptone or asparagine on nitrogen medium, calcium-phosphate among other inorganic salts, wheat bran and rice branare also favorable, but other factors rientioned earlier show no relationship with the spore formation. Sugar, however, also related with the spore color clearness of crimson and light brown, and spore color is mostly clear at the point of glucose concentration until 50%. And asparagine on nitrogen medium, calcium phosphate among other inorganic salts, rice bran did all affect on the color clearness, while other factors did not concern with color clearness. (c) Water, sugar and temperature have related with the acid formation which is promoted, by direct ratio at the point of water-saturated condition and glucose concentration of 50%, while temperature at $25^{\circ}C$favorably affected on the acid formation which is increased by inverse ratio at the temperature$25^{\circ}C$ to $45^{\circ}C$ And pH did not relate with the acid formation. (d) Cylindrical plate method devised by the author is mostly favorable for the preservation and isolation of culture, compared with the traditional slant medium method.

• Bulletin of the Korean Mathematical Society
• /
• v.33 no.3
• /
• pp.455-463
• /
• 1996

In [3] and [4], Kitahara, Pak and the author obtained the conformally invariant tensor $B_0$, which is an algebraic Hermitian analogue of the Weyl conformal curvature tensor W in the Riemannian geometry, by the decomposition of the curvature tensor H of the Hermitian connection and the notion of semi-curvature-like tensors of Tanno (see[7]). In [5], the author defined a conformally invariant tensor $B_0$ on a Hermitian manifold as a modification of $B_0$. Moreover he introduced the notion of local conformal Hermitian-flatness of Hermitian manifolds and proved that the vanishing of this tensor $B_0$ together with some condition for the scalar curvatures is a necessary and sufficient condition for a Hermitian manifold to be locally conformally Hermitian-flat.

• Journal of the Korean institute of surface engineering
• /
• v.53 no.4
• /
• pp.144-152
• /
• 2020

In the manufacturing process of joining of aluminum alloy and polymer, the strength of the metal-polymer joining is greatly influenced by the nanostructure of the oxide film. In this study, we investigated the dependence of joining strength on the thickness, structure, pore formation and surface roughness of the formed film. After the two-step anodization process, the surface oxide layer became thinner and rougher resulting in higher joining strength with the polymer. More specifically, after the two-step anodization, the surface roughness, Ra increased from 2.3 to 3.2 ㎛ with pore of three-dimensional (3D) nanostructure, and the thickness of the oxide film was thinned from 350 to 250 nm. Accordingly, the joining strength of the aluminum alloy with polymer increased from 23 to 30 MPa.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.182-186
• /
• 2000

The porous woven hose is recently considered as an effective element of automotive intake systems. In order to predict the acoustic performance of an intake system with a porous woven hose, the information on the acoustic wall impedance is required. In this article, a measurement technique that is valid over the low frequency range and without mean flow condition is presented. The measurement is performed in a cylindrical chamber with a concentric layout of the sample and the resistance is estimated from measured reactance and transmission loss data. It is observed that the measured transmission loss for a porous woven hose with an arbitrary length agrees well with the predicted one that uses the estimated impedance for a small sample length.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.2
• /
• pp.89-95
• /
• 2000

Test fishing was carried out to examine the selectivity of the mesh size in trammel net for tonguefish (Cynoglossidae spp.) from May to August, 1999 and a total of 30 times of test fishing have been done in the coastal waters around Dolsando, Yosu, South Chunra province, Korea. A gill net and a trammel net which were composed of three different mesh sizes (70.5mm, 86.6mm and 101mm) were used for the experiment. The selectivity curve of mesh size was estimated by Kitahara's method for Robust tonguefish (Cynoglossus robustus). The results obtained are summarized as follows ; 1. Catching efficiency of the trammel net (70.5mm-sized-lint main net) was 39.0% and it was 2.5 times higher than 15.8% for the gill net. 2. The optimum l/m value of the trammel net was 3.51 and it was 0.13 higher than 3.38 for the gill net. 3. The selectivity of trammel net was similar to that of the gill net for low length-class. However, the selectivity of trammel net was not good compared with that of the gill net for high length-class. The 50% selectivity was 1.33 for the trammel net and 0.83 for the gill net. According to the experimental results, fishing efficiency of the trammel net was better than that of the gill net for tonguefish (Cynoglossidae spp.) and it was known that catch length for targeted species could be selected by controlling the mesh size.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.41 no.1
• /
• pp.27-34
• /
• 2005

This study was conducted to examine the mesh selecivity and optimum mesh size of spring frame trap for conger eel. Conger myriaster. It was carried out on 25th Sep. 2002 at the coastal sea of Nung-po, Geojedo. The experimental fishing gear was used in five kinds of different mesh size spring frame trap that were 15mm, 20mm, 25mm, 30mm and 35mm, and one plastic pot as control fishing gear that was 6.7mm hole diameter. The mesh size 15mm, 20mm are the current gears, 25mm, 30mm are used in experiment, and 35mm is the legal mesh. These were made 50 traps, respectively. The mesh selectivity curve was analysed by the Kitahara's method(1968) and the optimum mesh size was estimated by relationship between the total length and diameter of conger eel and by the mesh selectivity master curve. The results obtained are summarized follows : 1. The total number of catch by the trap for conger eel was 835, it was consisted of 537 conger eel(64.4), 225 crabs(2639%) and 73 others(8.7%). 2. The value of maximum 1/m on the mesh selectivity curve was estimated at about 23.9. 3. The optimum mesh size of spring frame trap for conger eel was estimated 34.0mm in 50% selection range of the mesh selectivity master curve.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.2
• /
• pp.91-100
• /
• 2002

The field experiments were carried out to examine for the mesh selectivity in trammel net and optimum mesh size, during Aug. 10~13, Non 9~13 2000 in Jumunjin, Kangwon-Do and during Jun. 1~27 2001 in Suyong-Bay, Busan. The experiments in Jumunjin area were conducted by using trammel nets with seven different mesh sizes (60, 75, 90, 105, 135, 150, 180mm) and those in Suyong-Bay were done by using trammel nets and gill nets with three different mesh sizes (60, 75, 90mm) in order to compare two types of nets of same structure. The mesh selectivity analysis was done mainly with flat fish(Eopsetta grigorjewi) that was occupied 60% out of total catches. And the mesh selectivity was written by extension of Kitahara's method included master curve with function type. The results obtained are summarized as follows 1. Total number of catch by, trammel net was 2,331 and that of gill net was 1,433, and flat fishes occupied 59.8 ~60% in total catches. 2. The value of optimum l/m by, trammel net was higher about 0.1 than that of gill net according as trammel net was 2.56, and gill net was 2.47. 3. The 50% selection range by, trammel net was wider about 1.5 time than that of gill net according as trammel net was 1.88~3.36(1.48) and gill net was 2.00~3.02(1.02). 4. The optimum mesh size(OMS) was estimated that trammel net was about 141mm and gill net was about 132mm on first maturity length(FML) 265mm of flat fish. 5. On the optimum mesh size based on the first maturity length of flat fish, The 50% range by, trammel net was wider about 76mm than that of gill net according as trammel net was 265 mm~474mm and gill net was 265mm~398mm.

• The Korean Journal of Ceramics
• /
• v.6 no.2
• /
• pp.155-158
• /
• 2000

NMR study has been used for measuring precise quantity of the amorphous phase in the $Si_3N_4$powder. Care must be taken to allow the $^{29}$Si nuclear spin system to fully relax between pulses in order to make the signals proportional to the number of nuclei in each phase. $^{29}$Si MAS spectrum was decomposed into the three spectra of $\alpha$-, $\beta$-, and amorphous $Si_3N_4$assuming pseudo-Voigt function. Moreover, the Rietveld analysis of the powder X-ray diffraction data was performed to measure quantity of crystalline phases as $\alpha/\beta$ ratio.