• Journal of the Korean Chemical Society
• /
• v.62 no.2
• /
• pp.79-86
• /
• 2018

This study reported the adsorption of Cu(II) ions onto activated carbon prepared from Myristica Fragrans shell (MFS AC) over independent variables of contact time, activating chemical (NaOH) concentration, initial adsorbate concentration, initial pH of adsorbate solution and adsorption temperature. The MFS AC structure, morphology and total surface area were characterized by FTIR, SEM and BET techniques, respectively. The Cu(II) ions adsorption on the MFS AC (activated using 0.5 M NaOH) fitted best to Freundlich adsorption isotherm (FAI), and the FAI constant obtained was 0.845 L/g at $30^{\circ}C$ and pH 4.5. It followed the pseudo first order of adsorption kinetic (PFOAK) model, and the PFOAK based adsorption capacity was 107.65 mg/g. Thermodynamic study confirmed the Cu(II) ions adsorption should be exothermic and non-spontaneous process, physical adsorption should be taken place. The total surface area and pore volume based on BET analysis was $99.85m^2/g$ and 0.086 cc/g, respectively.

• Macromolecular Research
• /
• v.12 no.5
• /
• pp.466-473
• /
• 2004

We have used FT-IR spectra to explain the effects of hydrogen bonding between chitosan and polycaprolactam (PA6). A dynamic mechanical analysis study suggested that the optimum chitosan and PA6 miscibility under the conditions of this experiment were obtained at a blending ratio of 40:60. We studied the thermal degradation of chitosan blended with PA6 (chitosan/PA6) by thermogravimetric analysis and kinetic analysis (by the Ozawa method). Dry chitosan and PA6 exhibited a single stage of thermal degradation and chitosan/PA6 blends having> 20 wt% PA6 exhibited at least two stages of degradation. In chitosan/PA6 blends, chitosan underwent the first stage of thermal degradation; the second stage proceeded at a temperature lower than that of PA6, because the decomposition product of chitosan accelerated the degradation of PA6. The activation energies of the blends were between 130 and 165 kJ/mol, which are also lower than that of PA6.

• Journal of Engineering Education Research
• /
• v.21 no.3
• /
• pp.12-19
• /
• 2018

In this study, a new experimental device was developed for measurement of the coefficient of kinetic friction using a photo gate timer system which have advantages of easy and accurate detection of motion. This device, consisting of a side air-guide track and a side friction-free glider, forces a friction sample to move in a straight line without producing unnecessary friction. The new device is compared to two conventional measuring methods of friction for four different friction samples: one is using a camera system and the other is using a force sensor. It is demonstrated that the developed friction device in this study is easier to operate and produces the most accurate and the least deviating results among them. On the basis of these results, we propose that friction experiment using the new friction device is included in general physics experiment, so that engineering students should have a chance to get correct understanding of classical mechanics including friction phenomenon.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.36 no.4
• /
• pp.51-60
• /
• 2020

This study was designed to investigate present conditions and needs for ICT-based elderly group home remodeling by applying kinetic principle. to provide useful planning factor to make elderly housing more suitable for supporting elderly residents remodeling. This study surveyed 20 elderly care assistants and nurses who have employed at elderly group homes and presented them with 7 categories of 44 elderly home remodeling planning elements to check currently existing services in their elderly housing and evaluate their need for each service with regard to their residents' needs.

• Clean Technology
• /
• v.19 no.1
• /
• pp.51-58
• /
• 2013

In this study, kinetics data was obtained for steam reforming reaction of ethane over the nickel catalyst. The variables of steam reforming reaction were reaction temperature, partial pressure of ethane, and mole ratio of steam and ethane. Parameters for the power rate law kinetic model and the Langmuir-Hinshelwood model were obtained from the kinetic data. Also, sizing of steam reforming reactor was performed by using PRO/II simulator. For the steam reforming reaction of ethane, Langmuir-Hinshelwood model determining the reaction rate by the surface reaction was better suited than a simple power rate law kinetic model. On water-gas-shift reaction, power rate law kinetic model was well fitted to the kinetic data. Reactor size can be calculated for production of hydrogen through PRO/II simulation.

• Physical Therapy Korea
• /
• v.24 no.4
• /
• pp.77-83
• /
• 2017

Background: Shoulder external rotation exercises are commonly used to improve the stabilizing ability of the infraspinatus. Although the side-lying wiper exercise (SWE) is the most effective shoulder external rotation exercise to maximize infraspinatus activity, the effect of adduction force on the infraspinatus and posterior deltoid has not been demonstrated. Objects: This study was conducted to investigate whether horizontal adduction force increases infraspinatus activity and decreases posterior deltoid activity. Methods: Twenty-eight healthy subjects (male: 21, female: 7; $age=23.5{\pm}1.8years$; $height=170.1{\pm}7.4cm$; $weight=69.4{\pm}9.6kg$) were recruited. Subjects were asked to perform the SWE under two conditions: (1) general SWE and (2) SWE with adduction force using pressure biofeedback. Surface electromyography (EMG) signals of the infraspinatus and posterior deltoid were recorded during SWE. Paired t-tests were used to compare the EMG activity of the infraspinatus and posterior deltoid between the two conditions. Results: Posterior deltoid muscle activity was significantly decreased following SWE with adduction force ($7.53{\pm}4.52%$) relative to general SWE ($11.68{\pm}8.42%$) (p<.05). However, there was no significant difference in the infraspinatus muscle activity between the SWE with adduction force ($28.33{\pm}12.16%$) and the general SWE ($26.54{\pm}13.69%$) (p>.05). Conclusion: Horizontal adduction force while performing SWE is effective at decreasing posterior deltoid activity.

• Applied Chemistry for Engineering
• /
• v.17 no.3
• /
• pp.296-302
• /
• 2006

The kinetics of the thermal-oxidative decomposition of waste polyurethane (PU) according to oxygen concentration has been studied using a non-isothermal thermogravimetric technique at several heating rates from 10 to $50^{\circ}C/min$. A kinetic model accounting for the effects of the oxygen concentration by the differential and integral method based on Arrhenius equation was proposed to describe the thermal-oxidative decomposition of waste PU. To obtain the information on the kinetic parameters such as activation energy, reaction order, and pre-exponential factor, the thermogravimetric analysis curves and its derivatives have been analyzed using the kinetic analysis method proposed in this work. From this work, it was found that reaction orders for oxygen concentration had a negative sign, and activation energy decreased as the oxygen concentration increased. It was also found that the kinetic parameters obtained from the integral method using the single heating rate experiments varied with heating rates. Therefore, it is thought that the differential method using the multiple heating rate experiments more effectively represents the thermal-oxidative decomposition of waste polyurethane.

• Applied Chemistry for Engineering
• /
• v.23 no.2
• /
• pp.204-209
• /
• 2012

In this study, kinetics data was obtained for steam reforming reaction of ethane over the commercial ruthenium catalyst. The variables of ethane steam reforming were the reaction temperature, partial pressure of ethane, and steam/ethane mole ratio. Parameters for the power rate law kinetic model and the Langmuir-Hinshelwood model were obtained from the kinetic data. Also, sizing of steam reforming reactor was performed by using PRO/II simulator. The reactor size calculated by the power rate law kinetic model was bigger than that of using the Langmuir-Hinshelwood model for the same conversion of ethane. Reactor size calculated by the Langmuir-Hinshelwood model seems to be more suitable for the reactor design because the Langmuir-Hinshelwood model was more consistent with the experimental results.

• Physical Therapy Korea
• /
• v.26 no.2
• /
• pp.49-60
• /
• 2019

Background: After stroke, in order to improve gait function, it is necessary to increase the muscle strength and to enhance the propriocetive function of the lower extremity. Objects: This study aimed to compare the effects of open kinetic chain (OKC) versus closed kinetic chain (CKC) isokinetic exercise of the hemiparetic knee using the isokinetic equipment on lower extremity sensorimotor function and gait ability in patients with chronic stroke. Methods: Thirty participants with chronic hemiplegia (> 6 months post-stroke) were randomly divided into 2 equal groups: CKC group and OKC group. Patients from both groups attended conventional physiotherapy sessions 3 times a week for 6 weeks. Additionally, subjects from the CKC group performed isokinetic exercise using the CKC attachment, while those from the OKC group performed isokinetic exercise using the OKC attachment. The isokinetic knee and ankle muscles strength, position sense of the knee joint, and spatiotemporal gait parameters were measured before and after interventions. Results: The knee muscles peak torque/body weight (PT/BW) and hamstring/quadriceps (H/Q) ratio significantly increased in both groups (p<.01). In particular, ankle plantarflexors PT/BW, position sense of the knee, gait velocity, and spatial gait symmetry significantly improved in the CKC group (p<.01, p<.05, p<.01, and p<.01, respectively). Conclusion: CKC isokinetic exercise can be an effective therapeutic intervention for the improvement of sensorimotor function of the lower extremity and gait functions, such as gait velocity and symmetry. CKC position in isokinetic strength training is effective to improve functional ability in patients with chronic stroke.

• Resources Recycling
• /
• v.30 no.1
• /
• pp.14-25
• /
• 2021

As a demand of high-end steel raises, the importance of secondary refinement process also increases. However, the content of each component in molten steel, slag and inclusions change with the time, meaning the secondary refinement process is not an equilibrium state. Furthermore, many reactions occur between molten steel, slag, inclusion, refractory and alloying element during secondary refinement process. In order to consider the above complex reactions with non-equilibrium state, a few researchers developed kinetic models in secondary refinement process based on the experimental numerical equations. It is important to analyze and review to the previously reported models to develop a precise model. Therefore, in present study, the complex reaction models based on kinetic in secondary refinement process were analyzed, reviewed, and introduced. Moreover, the single reaction models also introduced which would be applied to the complex reaction models.