• Journal of Biosystems Engineering
• /
• 제16권4호
• /
• pp.346-354
• /
• 1991

Turning behavior of tractor-trailer system was studied to guide the tractor and trailer. Based upon kinematic relationship between the tractor and the trailer, a mathematical model was developed and analyzed by computer simulation. A field test was carried out to verify the mathematical model. Following conclusions were drawn from this study. 1. A mathematical model and a simulation program for turning behavior of tractor-trailer system were developed. 2. The results of the field tests showed that the RMS errors were less than 0.33m and the mathematical model based upon kinematic relationship can be used for mapping guidance system for tractor and trailer. 3. As the steering angle was increased, the turning radius was decreased. When the tractor travelled at the low speed, the travel speed of the tractor did not affect turning radius but did affect running time and stability for steering. 4. When the tractor travelled under the critical velocity, the towed trailer followed smoothly. When the the tractor travelled faster than the critical velocity, the towed trailer oscillated. The critical velocity was determined from the specification of the tractor and the trailer.

• 한국생산제조학회지
• /
• 제9권2호
• /
• pp.102-111
• /
• 2000

Methodology of volumetric error identification and compensation is presented to improve the accuracy of NC machine tools by using a reference artifact and a touch trigger probe. Homogeneous transformation matrix and kinematic chain are used for modeling the geo-metric and thermal errors of a three-axis vertical machining center. The reference artifact is designed and fabricated to identify the model parameters by machine tool metrology. Parameters in the error model are able to be identified and updated by direct measurement of the reference artifact on the machine tool under the actual conditions which include the thermal interactions of error sources. A volumetric error compensation system based on IBM/PC is linked with a FANUC CNC controller to compensate for the identified volumetric error in machining workspace.

• 대한기계학회논문집A
• /
• 제24권12호
• /
• pp.2899-2908
• /
• 2000

Methodology of volumetric error identification is presented to improve the accuracy of NC machine tools by using a reference artifact and a touch trigger probe. Homogeneous transformation matrix and kinematic chain are used for modeling the geometric and thermal errors of a three-axis vertical machining center. The reference artifact is designed and fabricated to identify the model parameters by machine tool metrology. Parameters in the error model are able to be identified and updated by direct measurement of the reference artifact on the machine tool under the actual conditions which include the thermal interactions of error sources. The proposed method can speed up and simplify volumetric error identification processes.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.415-419
• /
• 2000

Multi-degree-of-freedom (MDOF) displacement measurement Is needed In many application fields: precision machine control, precision assembly, vibration analysis, and so on. This paper presents a new MDOF displacement measurement method using a laser diode (LD), two position-sensitive detectors (PSDs), and a conventional diffraction grating. It utilizes typical features of a diffraction grating to obtain the information of MDOF displacement. MDOF displacement is calculated from the independent coordinate values of the diffracted ray spots on the PSDs. Forward and inverse kinematic problems were solved to compute the MDOF displacement of a rigid body. Experimental results show maximum absolute errors of less than ${\pm}10$ micrometers in translation and ${\pm}30$ arcsecs in rotation.

• 한국정밀공학회지
• /
• 제12권5호
• /
• pp.40-45
• /
• 1995

The kinematical relationship of bevel gearsets lies at the root of the gear design. As the demand on precision bevel gears is increased in the related industries, the kinematic analysis of a pair of sperical involute bevel gears needs to be exactly evaluated for the computer aided design. Pitch cone angles of bevel gearsets have been calculated under the assumption that the geared system is equivalent to a coned roller system without slipping. But this kinematical model involves some errors in the value of the ratio of angular velocity. In this paper, the ratio of the angular velocity is exactly derived, based on the perfect involute tooth surface. Four nonlinear equations representing the kinematical relationships are numerically solved to obtain the pitch and base cone angles. The ratios of angular volocities according to pressure and shaft angles are calculated and compared with those of the approximate gear model.

• 한국측량학회지
• /
• 제25권4호
• /
• pp.355-363
• /
• 2007

본 연구는 2003년도에 전국적으로 구축된 "교통(도로)분야 기본지리정보" 중 도로 기본지리정보의 최신성을 확보하기 위해서 경제적이고 신속 정확한 차량이동측량 취득방법을 이용한 도로 기본지리정보의 갱신방안을 통해 기본지리 정보의 활용성을 극대화하고자 하는데 그 목적이 있다. 이를 위해 대전시와 평택시를 대상으로 차량에 DGPS를 탑재한 차량 이동 측량방법을 이용하여 데이터를 획득하였고, 현장측량 성과와 기존 성과와의 검증은 선형 및 점형 요소의 정확도를 이용하였다. 검증 결과 인근 상시기준점들과의 거리가 가깝고 지형조건상 수신 상태가 양호한 대전지역의 경우는 1/5,000 수치지도에서 정하는 오차범위보다 그 오차가 작았으나. 상시기준점들과의 거리가 멀고 수신율이 좋지 않은 평택지역의 경우는 오차 한도를 넘는 결과를 보였다. 본 연구 결과 GPS 상시기준점과의 수신율을 분석한 후, 위성상태가 양호하지 않은 구간에 대해서는 후처리방식이나 Total Station 측량을 병행하여야 하며, 이동측량의 정확도를 확보하기 위해서는 각 기관들의 상시기준점을 공유하고, 이를 활용할 수 있는 추가 연구가 필요함을 알 수 있었다.

• 한국철도학회논문집
• /
• 제18권5호
• /
• pp.447-456
• /
• 2015

본 연구에서는 궤도틀림 측정용 트롤리의 사용성을 증진하기 위한 방편의 하나로 트롤리의 정지시 뿐만 아니라 이동시 계측방안과 이에 따른 계측오차의 최소화 방안에 대하여 논의하였다. 이를 위하여 트롤리의 완화곡선 및 원곡선내 주행에 따른 궤도틀림 측정의 정밀도를 향상시키기 위한 운동학적 관계식을 새롭게 제안하였으며 비선형 확장 칼만필터를 도입하여 계측오차를 최소화하였다. 제안한 모형의 적용성 파악을 위하여 이론적인 궤도상태를 가정한 후 이산형 및 연속형 궤도틀림 측정에 따르는 표준편차를 산정하였으며 이 결과, 제안한 모형의 효용성을 입증하였다. 또한 기존 궤도 틀림 모형과의 비교를 통해 제안한 운동학적 관계식의 우월성을 입증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.307-310
• /
• 2001

Mobile AGV is one of the nonholon-omic systems. The integration of the kinematic adaptive controller for the dynamic in this pa-per introduction a motion control problem's dynamic state feedback as well as output feedback tracking laws will be constructed with the adaptive extension of the controller is proposed. Feedback control strategies for mobile AGV are important to compensate for disturabances and errors in the initial condition. The problems of path following or tracking and of stabilization about a constant configuration have been treated as separate problems for nonholonomic mobile AGV.

• 대한전기학회논문지
• /
• 제39권6호
• /
• pp.631-637
• /
• 1990

It is well-known that the redundancy can be exploited to avoid the singular regions of the redundant manipulators by increasing the manipulability. The method, however, requires excessive energy and gives rather large tracking errors since the manipulability is increased rapidly so that the manipulator avoids the singular region quickly. In this paper, a new method is proposed in which the increasing speed of the manipulability is confined to a certain bound. Therefore, in the proposed method, the movement energy and the tracking errors are reduced. The computer simulation studies are performed to show the validity of the method.

• 전자공학회논문지B
• /
• 제32B권5호
• /
• pp.777-787
• /
• 1995

This paper presents a new method for automatically calibrating robot link (Kinematic) parameters during the process of estimating motion parameters of a moving object. The motion estimation is performed based on stereo cameras mounted on the end-effector of a robot manipulator. This approach significantly differs from other calibration approaches in that the calibration is achieved by simply observing the motion of the moving object (without resorting to any other external calibrating tools) at numerous and widely varying joint-angle configurations. A differential error model, which expresses the measurement errors of a robot in terms of robot link parameter errors and motion parameters, is developed. And then a measurement equation representing the true measurement values is derived. By estimating the above two kinds of parameters minimizing the difference between the measurement equations and the true moving pattern, the calibration of the robot link parameters and the estimation of the motion parameters are accomplished at the same time.