• 한국자동차공학회논문집
• /
• 제12권5호
• /
• pp.146-153
• /
• 2004

Torsion beam rear suspension has been widely adopted to the rear suspension of vehicle by reason of simple structure and cost competitiveness. Since the kinematic characteristics of torsion beam rear suspension are determined by elastic behavior of torsion beam, quasi-static analysis based on finite element modeling of torsion beam has been conducted to obtain the kinematic parameters of torsion beam rear suspension. In this paper, simple kinematic equations with rear geometric parameters are derived to predict the kinematic behavior of torsion beam rear suspension. The suspension design parameters such as roll center height, roll stiffness, roll steer and roll camber can be easily obtained with the kinematic equations. The suggested kinematic equations are validated from comparison with the test results and solution offered by ADAMS. The suspension design parameters varied with the position of torsion beam are discussed.

• 한국CDE학회논문집
• /
• 제16권4호
• /
• pp.305-313
• /
• 2011

This paper proposes a method for reusing kinematic design data for virtual facilities, Making a virtual model of a facility involves two major activities: geometric design (virtual model visualization) and kinematic design that should be remodeled frequently whenever design changes occur, Conventionally, a virtual model of an automated facility focuses on the design level, which mainly deals with design verification, alternative comparison, and geometric model diagnosis, Although a design level model can be designed with the information of past models from PLM system, a simulation level model is not sufficient utilized to be reused for kinematic design purpose, We propose a method for reusing kinematic information of a past simulation model to cope with this problem, We use the concept or the 'center of mass', which is a point representing the mean position of the matter in a body or system. And we also use comparison method of a boundary box to identity which 3D objects have to be involved from the design model to a link structure that is contained in the simulation model. Because a proposed method only use not a historical approach but a geometrical approach, it is more effective to apply to the field.

• 한국운동역학회지
• /
• 제32권4호
• /
• pp.147-152
• /
• 2022

Objective: The purpose of this study was to analyze the effects of club head and golf ball kinematics and body alignment according to the swing plane during golf driver swing. Method: Sixteen college golfers participated in this study. Kinematic data of the club head and golf ball were collected using golf swing analysis system (Trackman Ver. 3e). The body alignment variables were collected using 8 motion capture system. An Independent samples t-test was used for comparison between the Out-to-In group and In-to-Out group, and the statistical significance level was set at .05. Results: For the club head related variables, club path and club face angle showed higher values in Out-to-In swing plane than In-to-Out swing plane. For the kinematic variables of the golf ball, the total distance showed a higher value in the In-to-Out swing plane than that of the Out-to-In swing plane. For the body alignment, the In-to-Out swing plane showed higher values than the Out-to-In swing plane for the pelvis rotation angle and trunk rotation angle. Conclusion: This study suggest that it would be more effective to use the In-to-Out swing plane for increasing the total distance during the golf driver swing.

• 한국운동역학회지
• /
• 제17권4호
• /
• pp.157-167
• /
• 2007

The purpose of this study was to analyze kinematic techniques in the woman's 100m hurdle. In order to find the kinematic parameters, a 3-D video system for kinematic analysis-kwon3d 3.1(Kwon3D Motion Analysis Program Version 3.1)-was used. Eight JVC video cameras(GR-HD1KR) were used to film the performance of Lee Yeon-Kyoung at a frame rate of 60fields/s. The kinematic characteristics from the first hurdle to last hurdle were analyzed at the clearing hurdle spots such as distance, velocities, heights and angles. The real-life three-dimensional coordinates of 20 body landmarks during each phases were collected using a Direct Linear Transformation procedure. After analyzing the kinematic variables in the 100m hurdle run, the following conclusion were obtained; Lee Yeon-Kyoung had to maintain constant stride lengths between hurdles and increase takeoff distance before clearance and shorter landing distance after clearance. She also had to hit the correct takeoff point in front of the hurdle and extend the lead leg at the moment of landing in order to minimize the loss of velocity. She had to sprint between hurdles as fast as possible over 8m/s and run powerful first stride and shortened third stride preparing for the following hurdle clearances.

• PNF and Movement
• /
• 제20권1호
• /
• pp.19-29
• /
• 2022

Purpose: The purpose of this study was to analyze the gait patterns of adults with intellectual disability and healthy adults based on collected kinematic data on the lower extremities and to investigate the gait patterns of intellectually disabled people by comparing the differences between the two groups. Methods: The participants were divided into in one group of healthy adults (n = 9) and one group with mild intellectual disabilities (n = 9). 3D motion analysis (Myomotion) was used to collect kinematic data from each group while the participants walked 3 times over 10 m. As a statistical method, each group's kinematic data during walking was analyzed and compared using an independent sample t-test. Results: Comparing the kinematic data of the lower extremities during walking between the group with mild intellectual disability and the healthy group, there were significant differences between the two groups in the hip and ankle joints in the stance and swing phases. Conclusion: The analysis suggests that people with intellectual disabilities have kinematic differences compared with healthy people. Based on the results of this study, it is necessary to conduct further research on rehabilitation programs for joint stabilization, exercise for increasing joint range of motion, muscle strengthening exercise, and proprioception training for people with intellectual disabilities with insufficient physical function.

• 소성∙가공
• /
• 제22권1호
• /
• pp.30-35
• /
• 2013

In this study, springback amounts of an S-rail are quantitatively compared according to the hardening model using a finite element simulation for the stamping process with high strength steels. For comparison of the hardening models, two types of hardening models were investigated. The two models were isotropic hardening and kinematic hardening. For the analysis with kinematic hardening, the Yoshida-Uemori model was selected. Five kinds of springback modes were measured at designated sections and a comparison was made between the experiment and the analyses with two types of hardening models. The analysis results show that the springback in the flange and the wall curl are predicted more accurately with a kinematic hardening model.

• ETRI Journal
• /
• 제38권2호
• /
• pp.337-346
• /
• 2016

We propose a data-driven kinematic control method for a robotic spatial augmented reality (RSAR) system. We assume a scenario where a robotic device and a projector-camera unit (PCU) are assembled in an ad hoc manner with loose kinematic specifications, which hinders the application of a conventional kinematic control method based on the exact link and joint specifications. In the proposed method, the kinematic relation between a PCU and joints is represented as a set of B-spline surfaces based on sample data rather than analytic or differential equations. The sampling process, which automatically records the values of joint angles and the corresponding external parameters of a PCU, is performed as an off-line process when an RSAR system is installed. In an on-line process, an external parameter of a PCU at a certain joint configuration, which is directly readable from motors, can be computed by evaluating the pre-built B-spline surfaces. We provide details of the proposed method and validate the model through a comparison with an analytic RSAR model with synthetic noises to simulate assembly errors.

• International Journal of Automotive Technology
• /
• 제6권6호
• /
• pp.599-604
• /
• 2005

A functional suspension model is proposed as a kinematic describing function of the suspension, that represents the relative wheel displacement in polynomial form in terms of the vertical displacement of the wheel center and steering rack displacement. The relative velocity and acceleration of the wheel is represented in terms of first and second derivatives of the kinematic describing function. The system equations of motion for the full vehicle dynamic model are systematically derived by using velocity transformation method of multi-body dynamics. The comparison of test and simulation results demonstrates the validity of the proposed functional suspension modeling method. The model is computationally very efficient to achieve real-time simulation on TMS 320C6711 150 MHz DSP board of HILS (hardware-in-the-loop simulation) system for ECU (electronic control unit) evaluation of semi-active suspension.

• 소성∙가공
• /
• 제17권1호
• /
• pp.19-26
• /
• 2008

In the present work, the ratcheting behavior under uniaxial cyclic loading is analyzed. A comparison between the published and the results from the present model is also included. In order to simulate the ratcheting behavior, Two-Back Stress model is proposed by combining the non-linear Armstrong-Frederick rule and the non-linear Phillips hardening rule based on kinematic hardening equation. It is shown that some ratcheting behaviors can be obtained by adjusting the control material parameters and various evolutions of the kinematic hardening parameter can be obtained by means of simple combination of hardening rules using simple rule of mixtures. The ultimate back stress is also derived for the present combined kinematic hardening models.

• 제어로봇시스템학회논문지
• /
• 제12권5호
• /
• pp.464-472
• /
• 2006

This paper presents the two degree-of-freedom (DOF) planar parallel mechanism, called the $2{\underline{R}}RR-RP$ manipulator, whose degree-of-freedom is dependent on an additional passive constraining leg connecting the base and the platform. First, the kinematic analysis of the mechanism is performed: the inverse and forward kinematic problems are analytically solved, the workspace is systematically derived, and all of the singular configurations are examined. Then, in order to determine the geometric parameters the optimization of the mechanism is performed considering its dexterity, stiffness, and space utilization. Finally, the kinematic performances of the optimized mechanism are evaluated through the comparison study to the conventional 5-bar parallel manipulator.